Y13 - Hand truck Vevor - Free user manual and instructions

Product Type	Hand truck (furniture dolly)
Brand	Vevor
Model	Y13
Material	Alloy steel
Adjustable Length	From 17 to 28 inches (approx. 43 to 71 cm)
Width	2 inches (approx. 5 cm)
Normal Load Capacity	110 lbs (approx. 50 kg)
Maximum Load Capacity	330 lbs (approx. 150 kg)
Main Functions	Transport and move heavy furniture
Non-slip	Non-slip pads included to fix at ends
Brake	Brake to prevent sliding
Length Adjustment	By hand screw nut
Prohibited Use	Do not transport people, do not go up/down stairs
Environment	Avoid prolonged sun exposure
Maintenance	Inspect accessories before each use, replace if worn or damaged
Safety	Do not overload, do not place near flammable materials, do not move too fast near potholes
Warranty	Electronic warranty certificate available at vevor.com/support
Technical Support	www.vevor.com/support
Manufacturer	Shanghai Muxin Muyeyouxiangongsi, Shanghai, China
EU Importer	E-CrossStu GmbH, Frankfurt am Main
UK Importer	YH CONSULTING LIMITED

Frequently Asked Questions - Y13 Vevor

What is the maximum load capacity of the Y13 hand truck?

The maximum load capacity is 330 lbs (approx. 150 kg), but the recommended normal load is 110 lbs (50 kg). Never exceed the maximum load.

How to adjust the length of the hand truck?

Measure the width of the furniture, adjust the length of the truck between 17 and 28 inches using the hand screw nut, then tighten firmly.

Can I use this hand truck to go up or down stairs?

No, it is strictly forbidden to use this product to go up or down stairs. This could cause serious accidents.

How to install the non-slip pads?

Fix the non-slip pads to both ends of the support surface before using the hand truck. They ensure better grip and protect the furniture.

What to do if a part is damaged?

Inspect accessories before each use. If you notice cracks, wear or any other damage, immediately replace the defective parts. Contact technical support if necessary.

Is the hand truck warranted?

Yes, an electronic warranty certificate is available. For more information, visit www.vevor.com/support.

Can I transport people with this hand truck?

No, it is strictly forbidden to transport people under any circumstances.

How to maintain the Y13 hand truck?

Avoid prolonged sun exposure to prevent material aging. Regularly inspect the condition of parts and clean them with a dry cloth.

Is the hand truck suitable for moving heavy furniture on uneven surfaces?

It is not recommended to move too fast near potholes. On uneven surfaces, proceed with caution and do not overload the device.

Where can I find the complete manual?

The complete manual is available for free download in PDF format at notice-facile.com. You can also contact technical support via www.vevor.com/support.

USER MANUAL Y13 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

FURNITURE DOLLIES

MODEL: Y13

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

FURNITURE DOLLIES

MODEL: Y13

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any technology or software updates on our product.

SAFETY INSTRUCTIONS

WARNING:

1. Please do not put it near flammable materials.
2. It is forbidden to carry people under any condition.
3. This product cannot be used to go up or down stairs.
4. Overload is strictly prohibited.
5. Don't move too fast when passing pothole areas.

SAVE THESE INSTRUCTIONS

MODEL AND PARAMETERS

Model: Y13

Material: Alloy Steel

Product size: Dollies length adjustment range is 17 to 28in, width 2in. Load capacity: The normal load is 110 pounds, and the maximum load does not exceed 330 pounds.

ASSEMBLY AND USE

1. Attach non-slip pads to both ends of the support surface.

1. Measure the width of the furniture.

1. Adjust the length of the dollies according to the measured furniture width and tighten the hand screw nut.

1. Put the furniture on the dollies and push it to the desired position

1. Press the brake on the dollies to prevent it from sliding.

MAINTENANCE

1. Avoid prolonged exposure to the sun to prevent aging.
2. Inspect accessories for wear, cracks, and other damage before use. Replace defective accessories immediately.

Manufacturer: Shanghai Muxin Muye Youxian Gongsi

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000, CN.

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

MAINTENANCE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

MAINTENANCE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

MAINTENANCE

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

MAINTENANCE

Imported to Australia: SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

E-CrossStu GmbH

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

MAINTENANCE

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Przedsław ciel UE

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

REP WIELKIEJ BRYTANII

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

MAINTENANCE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

MAINTENANCE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE