XH-6X4FT - Sports net Vevor - Free user manual and instructions

Find the device manual for free XH-6X4FT Vevor in PDF.

Vevor XH-6X4FT - Sports net
📄 70 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vevor XH-6X4FT - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Football Rebound Net
Brand Vevor
Model XH-6X4FT
Dimensions 6 x 4 ft (approx. 183 x 122 cm)
Weight Approx. 5 kg
Frame Material Steel
Net Material Polyester
Use Sports training, ball rebounding
Power Source None (manual equipment)
Assembly Requires 2 persons, tools: hammer and Phillips screwdriver (not included)
Ground Fixing Ground stakes included, to be driven into a flat surface
Safety Use under adult supervision, do not climb, secure firmly to the ground
Maintenance Clean with a soft dry cloth, do not use water
Warranty Electronic warranty certificate at www.vevor.com/support
Technical Support www.vevor.com/support
Manufacturer Hunan Xinghai Sports Co., Ltd., China
EU Importer E-CrossStu GmbH, Frankfurt
UK Importer YH CONSULTING LIMITED
Box Contents Frame, net, ground stakes, fixing parts (see manual)
Usage Outdoor, avoid in rainy or stormy weather

Frequently Asked Questions - XH-6X4FT Vevor

How to assemble the Vevor XH-6X4FT rebound net?
Assembly requires two persons. Start by laying out all parts flat. Follow the numbered steps in the manual: first assemble the frame by connecting tubes (parts 1-7), then attach the net (part 8-9) using fasteners (part 10). Use a hammer and Phillips screwdriver (not included) to tighten screws. Finish by driving the ground stakes (part 11) to stabilize the structure.
Can I use the net in rain or strong wind?
No, it is not recommended to use the net in rainy, stormy, or windy weather. Wet conditions can damage the material and wind may cause it to tip over, even if anchored. Store it indoors after use.
What tools are required for assembly?
You will need a hammer and a Phillips screwdriver. These tools are not included in the packaging. Wear protective gloves during assembly.
How to fix the net to the ground to prevent it from falling?
Use the included ground stakes (part 11). Drive them into the ground through the holes at the base of the frame. Ensure the ground is stable enough to hold the stakes. Do not place the net on asphalt or concrete without checking grip.
Is the net suitable for sports other than football?
This product is specifically designed for football training (ball rebounding). It can be used with other light balls, but its primary use is football. Avoid heavy balls that could damage the net or frame.
How to maintain and clean the net?
Clean the net and frame with a soft dry cloth. Never use water, abrasive cleaners, or harsh pads. Keep the product dry after each use to prevent rust and net deterioration.
What to do if parts are missing or damaged?
Contact Vevor support via their website www.vevor.com/support. Have your model number (XH-6X4FT) and proof of purchase ready. They will provide the necessary replacement parts.
Does this product come with a warranty?
Yes, Vevor offers an electronic warranty certificate. You must activate it at www.vevor.com/support by entering your product information. Keep your proof of purchase for any claims.
What is the maximum recommended ball weight?
The manual does not specify an exact weight, but it is designed for standard footballs (size 5, weight approx. 410-450 g). Avoid American footballs or other heavy sports balls that could damage the net.
Can I leave the net assembled outside permanently?
It is not recommended to leave the net exposed to weather permanently. Store it indoors or cover it when not in use. UV and moisture can accelerate wear of the net and frame.

User questions about XH-6X4FT Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Sports net in PDF format for free! Find your manual XH-6X4FT - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XH-6X4FT by Vevor.

USER MANUAL XH-6X4FT Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SOCCER REBOUND NET

MODEL: XH-6X4FT

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

MODEL: XH-6X4FT

Technical line drawing of a rectangular panel with a grid pattern and a central square cutout. No text or symbols.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you receive. Please forgive us that we won't inform you again if there are any technology updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

Thank you for using this product. In order to make sure that you can operate the machine correctly, read this instruction carefully before operation and keep it properly for future reference. Please be sure to read the precautions and safety rules on this page to ensure your safe use. This manual will outline safety warnings and precautions, operating, maintenance, and cleaning. The warnings and instructions reviewed in this manual cannot cover all possible conditions and situations that may occur. Caution and common sense are not built into this product, since we believe that the users will comply with these codes.

Please read ALL the instructions before using your machine.

  1. Assembly needs to follow these instructions. Incorrect assembly can be a hazard. Wear heavy-duty work gloves during assembly.
  2. Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
  3. Weight and elastic and other product properties are only applicable to correct and completely assembled products.
  4. Keep the assembly area clean and well-lit.
  5. Keep bystanders out of the area during assembly.
  6. This is sports training equipment, not a toy. It must be used under the guidance of a coach. Do not allow children or pets to play alone or approach the item. Do not climb on the product.
  7. Use only as intended. Do not sit or stand on the product.
  8. Inspect before every use. Do not use if parts are loose or damaged.
  9. People or objects hanging on the product can cause it to fall.
  10. Pay attention to pedestrians and vehicles when using.
  11. Do not use this unit for any purpose other than its intended use.
  12. Do not place items on the rebound net to avoid damage.
  13. Do not use for commercial purposes.
  14. Do not clean with any abrasive material.
  15. Never leave it unattended while in use.
  16. Pet urine and feces can damage the product; keep pets away.
  17. Do not place the product on or near hot air, electric burners, or heaters. Fireworks, cigarettes, flares, and other items can ignite the product. Please keep it away from them.
  18. The product should be placed on a flat surface. And it should be installed in an open and safe place, avoiding areas near windows, roads, railways, rivers, etc.
  19. Sports equipment (soccer boots, football gloves, etc.) should be worn during use. Do not place it in a damp environment.

WARNING:

  1. Ground nails must be used to fix the product on the ground (to ensure the reliability of the ground itself) to prevent it from falling.
  2. This appliance is not intended for use by young or infirm persons unless supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the product. Pets should stay away from the product. Do not use outdoors in rainy and cloudy days, avoid lightning strikes and falls. People or pets hanging on the product will cause injury or death.

ASSEMBLY STEPS

  1. Please dispose of all plastic bags carefully and keep them away from children and pets.
  2. Check all components provided according to the list in this manual. Make sure you have all of the parts listed.
  3. Although paying particular attention when manufacturing this product, you may be careful during the assembly process to avoid being scratched by sharp edges.
  4. Wear protective gloves during assembly and using.
  5. The product should be placed on a flat surface.
  6. The product requires two people to assemble.
  7. The product requires the use of a hammer and a Phillips screwdriver (hammer and cross screwdriver need to be purchased by oneself).

Attention: Ground nails must be used to fix the product on the ground to ensure the reliability of the ground itself to prevent it from falling.

Parts No.PictureQtyParts No.PictureQty
1Vevor XH-6X4FT - ASSEMBLY STEPS - 12 PCS8Vevor XH-6X4FT - ASSEMBLY STEPS - 21 PCS
2Vevor XH-6X4FT - ASSEMBLY STEPS - 32 PCS9Vevor XH-6X4FT - ASSEMBLY STEPS - 41 PCS
3Vevor XH-6X4FT - ASSEMBLY STEPS - 51 PCS10Vevor XH-6X4FT - ASSEMBLY STEPS - 626 PCS
4Vevor XH-6X4FT - ASSEMBLY STEPS - 71 PCS11Vevor XH-6X4FT - ASSEMBLY STEPS - 82 PCS
5Vevor XH-6X4FT - ASSEMBLY STEPS - 92 PCS12Vevor XH-6X4FT - ASSEMBLY STEPS - 104 PCS
6Vevor XH-6X4FT - ASSEMBLY STEPS - 112 PCS13Vevor XH-6X4FT - ASSEMBLY STEPS - 121 PCS
7Vevor XH-6X4FT - ASSEMBLY STEPS - 131 PCS

Note: The quantity of parts shown in the manual is the actual usage; unused parts are spare parts. Please pay attention to the number label on the surface of the packaging.

STEP 1graph TD A["①"] --> B["②"] B --> C["③"] C --> D["④"] D --> E["⑤"] E --> F["⑥"] F --> G["⑦"] G --> H["⑧"] H --> I["⑨"] I --> J["⑩"]

STEP 2Technical line drawing of a solar panel array with a magnified inset showing the top view. No text or symbols.

CLEANING AND STORAGE

  1. Wipe with a soft, dry cloth. Never use an abrasive cleanser or harsh pad. Do not clean with water or other liquids. Be sure to keep the product dry.
  2. Children are not allowed to wipe the product to avoid tipping and falling.
  3. After the product is disassembled, please put the parts and accessories together.

Manufacturer: Hunan Xinghai Sports Co., Ltd.

Address: High-Tech Zone of Yuanjiang, Yiyang City, Hunan Province, China

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

ECREP

E-CrossStu GmbH

Mainzer Landstr. 69, 60329

Frankfurt am Main.

UKREP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when you are placing an order with us that you are actually saving half in comparison with the top major brands.

MODEL: XH-6X4FT

Technical line drawing of a grid-patterned panel with a central rectangular cutout and support structure. No text or symbols.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. Appearance of the product shall be subject to the product you receive. Please forgive us that we won't inform you again if there are any technology updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

STEP 2Simple line drawing of a mechanical component with a pin and lever, enclosed in a circle. No text or symbols.

Technical line drawing of a basketball court with grid layout and support structure. No text or symbols.

CLEANING AND STORAGE

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODEL: XH-6X4FT

Technical line drawing of a rectangular panel with a grid pattern and a central square cutout. No text or symbols.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you receive. Please forgive us that we won't inform you again if there are any technology updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

STEP 2

CLEANING AND STORAGE

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when you are placing an order with us that you are actually saving half in comparison with the top major brands.

MODEL: XH-6X4 FEET

Technical line drawing of a rectangular panel with a grid pattern and a central square cutout. No text or symbols.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you receive. Please forgive us that we won't inform you again if there are any technology updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

STEP 2Simple line drawing of a mechanical component or tool inside a circle. No text or symbols.

Technical line drawing of a basketball court with grid layout and support structure. No text or symbols.

CLEANING AND STORAGE

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you with tools at competitive prices. "Save Half", "Half Price" or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We are kindly reminded to verify carefully when you are placing an order with us that you are actually saving half in comparison with the top major brands.

MODEL: XH-6X4FT

Technical line drawing of a grid-patterned panel with a central rectangular cutout and support structure. No text or symbols.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you receive. Please forgive us that we won't inform you again if there are any technology updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

STEP 2

CLEANING AND STORAGE

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when you are placing an order with us that you are actually saving half in comparison with the top major brands.

MODEL: XH-6X4FT

Technical line drawing of a grid-patterned panel with a central rectangular cutout and support structure. No text or symbols.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you receive. Please forgive us that we won't inform you again if there are any technology updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

STEP 2Technical line drawing of a solar panel array with a magnified inset showing a small component (no text or symbols)

CLEANING AND STORAGE

Address: High-Tech Zone of Yuanjiang, Yiyang city, Hunan Province, China

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place Rancho Cucamonga, CA 91730

ECREP

E-CrossStu GmbH

Mainzer Landstr.69, 60329

Frankfurt am Main.

UKREP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

MODEL: XH-6X4FT

Technical line drawing of a grid-patterned panel with a central rectangular cutout and support structure (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. Appearance of the product shall be subject to the product you receive. Please forgive us that we won't inform you again if there are any technology updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

STEP 2Technical line drawing of a grid-based mechanical device with an inset showing a small component (no text or symbols)

CLEANING AND STORAGE

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

MODEL: XH-6X4FT

Technical line drawing of a grid-patterned panel with a central rectangular cutout and support structure (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you receive. Forgive us that we won't inform you again if there are any technology updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

CLEANING AND STORAGE

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : XH-6X4FT

Category : Sports net