VDC11 - Toys Vevor - Free user manual and instructions

Product Type	Electronic dartboard with LED lighting
Brand	Vevor
Model	VDC11
Category	Toys
Target Dimensions	Approximately 45 cm diameter, thickness 3 cm
Total Weight	Approximately 2 kg
Power Supply	3 AA batteries (not included), via pre-assembled battery compartment
Lighting	Integrated LED to improve visibility
Number of Players	Up to 2 players (versus mode)
Available Games	Cricket, 01 (301/501), and other standard games
Included Accessories	6 darts, 6 replacement tips, 2 dry-erase markers, cloth, mounting tool, mounting plate, screws and anchors
Material	ABS plastic and metal (darts)
Safety	Protection class III, CE certified, do not use for other purposes, keep out of reach of children under 3 years
Maintenance	Clean with a soft dry cloth, do not use abrasive products
Warranty	Technical support and electronic warranty certificate via www.vevor.com/support
Spare Parts	Complete parts list in the manual, available from the manufacturer
Manufacturer	Shanghaimuxinmuyeyouxiangongsi, Shanghai, China

Frequently Asked Questions - VDC11 Vevor

How to install the Vevor VDC11 dartboard?

Follow the steps in the manual: attach the mounting plate to the wall using the provided screws and anchors, at a height of 390 mm from the floor (center of the target). Hang the target on the plate and tighten the fixing screws. Ensure the surface is flat and solid.

What type of batteries to use and how to insert them?

Use 3 AA batteries (not included). The battery compartment is pre-assembled on the back of the target. Open the compartment, insert the batteries respecting polarity, then close. The LED lights up when powered on.

How to change the game on the VDC11 target?

Press the 'Game' button on the front panel to scroll through modes: Cricket, 301, 501, etc. Confirm with the 'Enter' button. The game mode is displayed on the LED screen.

Can steel tip darts be used?

No, only use the provided soft tip darts (plastic). Steel tips can damage the electronic surface and the target.

How to clean the target?

Wipe the surface with a soft dry cloth. Never use abrasive cleaners or solvents. For the dry-erase board, use a dry-erase marker and a cloth to erase.

The target does not light up, what to do?

First check that the batteries are installed correctly and are new. Check the battery compartment for loose connections. If the problem persists, contact Vevor technical support.

What games are available and their rules?

Games include Cricket (aim for segments 15-20 and bull) and 01 games (301, 501) where you need to reduce your score to zero. The provided manual describes the complete rules.

Is the target suitable for children?

This product is an electronic dart game not recommended for children under 14 due to dart tips. Under adult supervision, it may be suitable for older children.

How to get spare parts?

The parts list is provided in the manual. To order, contact Vevor via www.vevor.com/support with your model number VDC11. The warranty covers manufacturing defects.

What is the recommended throwing distance?

The standard distance is 2.37 meters (7 feet 9.25 inches) from the wall to the throwing line. Measure and mark the line on the floor for regulation play.

USER MANUAL VDC11 Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

DARTBOARD AND CABINET SET

Model:VDC11

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co\ all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

Model:VDC11

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

	Warning-To reduce the risk of injury, user must read instruction manual carefully.
	CORRECT DISPOSAL LED LightThis product is subject to the provision of european Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in European Union. This applies to the product and all accessorie marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a point for recycling electrical and electronic devices.
	This product is of protection class III.
	Compliance is a EC security certification.

Thank you for using this product. In order to make sure that you can operate machine correctly, read this instruction carefully before operation and keep it properly for future reference. Please be sure to read the precautions and safe rules in this page to ensure your safe use. This manual will outline safety warnings and precautions, operating, maintenance and cleaning. The warnings and instructions reviewed in this manual cannot cover all possible conditions as situations that may occur. Caution and common sense are not built into this product, since we believe that the uses will comply with these codes.

Please read ALL the instructions before using your machine.

1. Assemble needs to follow these instructions. Incorrect assembly can be a hazard. Wear heavy-duty work gloves during assembly.
2. Do not assemble when tired or when under the influence of alcohol, drug medication.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not apply this unit to any other purposes than the indicated usage.
6. DO NOT CLEAN IT WITH ANY ABRASIVE MATERIAL.
7. Do not place the product on or near hot air, electric burners or heaters.

Fireworks, cigarettes, flares, and other items can ignite the product. Please st away from them.

Installation INSTRUCTIONS

1. Please dispose of all plastic bags carefully and keep them away from chi and pets.
2. Check all components provided according to the list in this manual. Make s you have all of the parts listed.
3. Although paying particular attention when manufacturing this product, you must be careful during the assembly process to avoid being scored by sharp edges.
4. Wear protective gloves, during assembly and use.

PARTS LIST

#1		#2DART BOARD 1 PC
#3SCREW1 PC	#4SCREW ANCHOR2 PCS	#5MOUNTING PLATE1 PC	#6SCREW2 PCS
#7BOLT2 PCS	#8LOCK NUT2 PCS	#9WASHER4 PCS	#10BUMPER MOLDED3 PCS
#11NAIL3 PCS	#12DART6 PCS	#13 FLIP - BLACK & WHITE6 PCS	#14DRY ERASE MARKER2 PCS
#15TOOL1 PC	#16DUSTER CLOTH1 PC	#17LED Light1 PC(Preassemble)	#18Battery Box 1 PC(Preassemble)

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

STEP 7

STEP 8

graph TD
    A["Target 1: Shape with diagonal lines"] --> B["Target 2: Hexagonal prism with dashed internal lines"]
    B --> C["Target 3: Hexagon with solid lines"]
    D["Target 4: Target with arrowheads and labeled points #12 and #13"] --> E["Target 5: Arrowhead with spiral line"]
    E --> F["Target 6: Arrowhead with spiral line"]

STEP 9

The light and battery case of this step have been installed on the cabinet, a user needs to check the correct connection first. (Note that this product does include batteries, users need to buy it by themselves)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

ENSEMBLE JEU DE FLÉCHETTES ET ARMOIRE

Modèle : VDC 11

BESOIN D'AIDE ? CONTACTEZ-NOUS!

SAFETY WARNINGS AND PRECAUTIONS

Installation INSTRUCTIONS

STEP 6

STEP 7

STEP 8

graph TD
    A["Target 1: Shape with diagonal lines"] --> B["Target 2: Hexagonal prism with dashed internal lines"]
    B --> C["Target 3: Hexagon with solid lines"]
    D["Target 4: Target with arrowheads and labeled points #12 and #13"] --> E["Target 5: Arrowhead with spiral line"]
    E --> F["Target 6: Arrowhead with spiral line"]

STEP 9

Lieu, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

SAFETY WARNINGS AND PRECAUTIONS

Installation INSTRUCTIONS

STEP 6

STEP 7

STEP 8

graph TD
    A["Target 1: Shape with diagonal lines"] --> B["Target 2: Hexagonal prism with dashed internal lines"]
    B --> C["Target 3: Hexagon with solid lines"]
    D["Target 4: Target with arrowheads and numbers #12 and #13"] --> E["Target 5: Arrowhead with spiral line"]
    E --> F["Target 6: Arrowhead with spiral line"]

STEP 9

YH CONSULTING LIMITED. C/O YH Consultin

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

SET BERSAGLIO E ARMADIETTO

Modello: VCC 11

Installation INSTRUCTIONS

STEP 6

STEP 7

STEP 8

graph TD
    A["Target 1: Shape with diagonal lines"] --> B["Target 2: Hexagonal prism with dashed internal lines"]
    B --> C["Target 3: Hexagon with solid lines"]
    D["Target 4: Target with arrowheads and numbers #12 and #13"] --> E["Target 5: Arrowhead with spiral line"]
    E --> F["Target 6: Arrowhead with spiral line"]

STEP 9

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122Australia

YH CONSULTING LIMITED. C/O YH Consultin

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

SAFETY WARNINGS AND PRECAUTIONS

Installation INSTRUCTIONS

STEP 6

STEP 7

STEP 8

graph TD
    A["Target 1: Shape with diagonal lines"] --> B["Target 2: Hexagonal prism with dashed internal lines"]
    B --> C["Target 3: Hexagon with solid lines"]
    D["Target 4: Target with arrowheads and numbers #12 and #13"] --> E["Target 5: Arrowhead with spiral line"]
    E --> F["Target 6: Arrowhead with spiral line"]

STEP 9

YH CONSULTING LIMITED. C/O YH Consultin

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

ZESTAW DO DARTA I SZAFKI

Model: VDC 11

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

SAFETY WARNINGS AND PRECAUTIONS

Installation INSTRUCTIONS

STEP 6

STEP 7

STEP 8

graph TD
    A["Target 1: Shape with diagonal lines"] --> B["Target 2: Hexagonal prism with dashed internal lines"]
    B --> C["Target 3: Hexagon with solid lines"]
    D["Target 4: Target with arrowheads and numbers #12 and #13"] --> E["Target 5: Arrowhead with spiral line"]
    E --> F["Target 6: Arrowhead with spiral line"]

STEP 9

Place, Rancho Cucamonga, Kalifornia 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consultin

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

DARTBORD- EN KASTENSET

Model : VDC11

HULP NODIG? NEEM CONTACT MET ONS OP!

SAFETY WARNINGS AND PRECAUTIONS

Installation INSTRUCTIONS

STEP 6

STEP 7

STEP 8

graph TD
    A["Target 1: Shape with diagonal lines"] --> B["Target 2: Hexagonal prism with dashed internal lines"]
    B --> C["Target 3: Hexagon with solid lines"]
    D["Target 4: Target with arrowheads and numbers #12 and #13"] --> E["Target 5: Arrowhead with spiral line"]
    E --> F["Target 6: Arrowhead with spiral line"]

STEP 9

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

BEHÖVER HJÄLP? KONTAKTA OSS!

Installation INSTRUCTIONS

STEP 6

STEP 7

STEP 8

graph TD
    A["Target 1: Shape with diagonal lines"] --> B["Target 2: Hexagonal prism with dashed internal lines"]
    B --> C["Target 3: Hexagon with solid lines"]
    D["Target 4: Target with arrowheads and numbers #12 and #13"] --> E["Target 5: Arrowhead with spiral line"]
    E --> F["Target 6: Arrowhead with spiral line"]

STEP 9

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP