SS-DZ2 - Transport cart Vevor - Free user manual and instructions

Product Type	Transport Trolley
Brand	Vevor
Model	SS-DZ2
Maximum Load Capacity	544 kg (1,200 lb)
Platform Material	Polypropylene (PP) + stainless steel
Number of Casters	4
Included Accessories	4 casters, 4 anti-slip pads, 8 level gauges
Assembly Required	Yes
Recommended Use Surface	Flat floor, indoor
Intended Use	Transport of furniture and heavy loads
Safety Instructions	Do not exceed load, do not transport people, do not use on stairs
Maintenance	Clean with a damp cloth, check fastenings regularly
Warranty	Technical support via www.vevor.com/support
Storage	In a dry place, out of reach of children
Spare Parts	Available from Vevor

Frequently Asked Questions - SS-DZ2 Vevor

What is the load capacity of the SS-DZ2 trolley?

The maximum load capacity is 544 kg (1,200 lb). Never exceed this limit to avoid any risk of damage or injury.

How to assemble the trolley?

Follow the 6 steps: insert the panels into the square tubes, assemble them, install the four rear casters, attach the cylindrical foot, place the 8 level gauges, and stick the anti-slip pads.

Can I use this trolley to go up stairs?

No, it is forbidden to use this trolley on stairs. It is designed only for flat floors.

Can I transport people on the trolley?

No, transporting people is strictly forbidden under any circumstances.

How to maintain the trolley?

Clean it with a damp cloth. Check the casters regularly and tighten screws if necessary. Immediately replace any damaged part.

What to do if a caster is damaged?

Replace it immediately. Contact Vevor via www.vevor.com/support to obtain spare parts.

Is the trolley suitable for outdoor use?

It is designed for indoor use on flat floors. Outdoors, avoid potholes and do not exceed a moderate pace.

What accessories are included in the package?

The package includes: 4 casters, 4 anti-slip pads, and 8 level gauges (leveling feet).

Where to find warranty and technical support?

Go to www.vevor.com/support to obtain the electronic warranty certificate and technical support.

Can I use the trolley without reading the manual?

No, it is essential to carefully read the safety instructions before any use to avoid accidents.

USER MANUAL SS-DZ2 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

FURNITURE DOLLIES

MODEL: SS-DZ2

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

FURNITURE DOLLIES

MODEL: SS-DZ2

Photo for Reference

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

WARNING:

WARNING:

1. Please do not put it near flammable materials.
2. It is forbidden to carry people under any condition.
3. This product cannot be used to go up or down stairs.
4. Don't move too fast when passing pothole areas.
5. Do not climb, sit or stand on the dolly.
6. Do not exceed the loading capacity.
7. Do not use the dolly if any part is missing or damaged. Replace damaged parts immediately.

MODEL AND PARAMETERS

Model	Photo		PARAMETERS
SS-DZ2	1-pack		Material: PP +stainless steelLoad Capacity:1. The maximum load does not exceed 1200 pounds.

ASSEMBLY & INSTALLATION

Assembly:

Step 1: Insert two panels into metal square tubes and assemble them, and do the same for the other side.

Step 2: Insert the assembled panel into the metal square tube and connect it properly.

Step 3: Install the four casters around the back of the panel.

Step 4: Install the cylindrical foot on the back of the panel (insert it above the metal bracket).

Step 5: Install 8 level gauges in the concave area on the front of the panel.

Step 6: Stick four anti-slip pads around the front of the panel.

GENERAL SAFETY WARNINGS

WORK AREA SAFETY

1. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

PERSONAL SAFETY

1. Stay alert, watch what you are doing and use common sense when operating the dolly. Do not use a dolly while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating this dolly may result in serious personal injury.
2. Use personal protective equipment. Always wear eye protection. Protective equipment such as a respiratory mask, non-skid safety shoes and hearing protection used for appropriate conditions will reduce the risk of personal injury.
3. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

TOOL USE AND CARE

1. Do not force the dolly. Use the correct dolly for your application. The correct dolly will do the job better and safer at the rate for which it was designed.
2. Store idle dolly out of the reach of children and do not allow persons unfamiliar with the dolly or these instructions to operate it. The dolly can be dangerous in the hands of untrained users.
3. Maintain dolly. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the dolly's operation. If damaged, have the dolly repaired before use. Many accidents are caused by poorly maintained tools.
4. Use the dolly, accessories, and bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the tool for operations different from those intended could result in a hazardous situation.
5. Try to apply force on the four wheels as much as possible, rather than concentrating it in the middle.

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd.

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000, China.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia.

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730.

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69, 60329 Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited, Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

C/O YH Consulting Limited, Bureau 147, Centurion House,

Route de Londres, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

FURNITURE DOLLY

MODEL: SS-DZ2

Photo for reference

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

electronics www.vevor.com/support

FURNITURE DOLLIES

MODEL: SS-DZ2

Reference photo

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported into USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho

Cucamonga, CA 91730

C/O YH Consulting Limited Office 147, Centurion House,

Viale Europa, 101, 00186 Rome, Italy

VEVOR®

TOUGH TOOLS, HALF PRICE

Reference photo

WORKPLACE SAFETY

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

FURNITURE DOLLIES

MODEL: SS-DZ2

Reference photo

NEED HELP? CONTACT US!

GENERAL SAFETY WARNINGS

WORKPLACE SAFETY

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

FURNITURE DOLLIES

MODEL: SS-DZ2

Photo for reference

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147, Centurion House,

London Road, Staines-upon-Thames, Surrey, TW18 4AX