RG1510 - Vise Vevor - Free user manual and instructions

Product Type	Chain Pipe Vise
Brand	Vevor
Model	RG1510
Clamping Capacity (Pipes)	1/8" to 1-1/2" (3.2 to 38.1 mm)
Body Material	Aluminum Alloy
Jaw Material	Hardened Steel
Weight	1.25 kg (2 lb 12 oz)
Dimensions (L x W x H)	270 x 115 x 120 mm
Color	Red and Black
Non-slip Feet	Rubber, protect surfaces
Quick Jaw Change	Yes (less than 5 min with basic tools)
Main Use	Assembly, welding, light disassembly of pipes and fittings
Required Safety Equipment	Safety goggles, gloves, non-slip shoes
Maintenance	Clean with a non-abrasive cloth
Spare Parts Available	Upper and lower jaws
Warranty	Electronic warranty via www.vevor.com/support
Included Accessories	None
Manufacturer	Shanghaimuxinmuyeyouxiangongsi, Shanghai, China
Importer (EU)	E-CrossStu GmbH, Frankfurt am Main
Importer (UK)	YH CONSULTING LIMITED

Frequently Asked Questions - RG1510 Vevor

What is the clamping capacity of the RG1510 vise?

The Vevor RG1510 vise can clamp pipes with a diameter between 1/8" (3.2 mm) and 1-1/2" (38.1 mm) and fittings up to 1".

What is the weight of the RG1510 vise?

The vise weighs approximately 1.25 kg (2 lb 12 oz), making it very lightweight and easy to carry.

What materials is the RG1510 vise made of?

The body is made of aluminum alloy and the jaws of hardened steel for optimal durability and lightness.

How to change the jaws of the RG1510 vise?

The jaws can be replaced quickly, in less than 5 minutes, using basic tools (wrenches).

Is the RG1510 vise suitable for welding work?

Yes, it is designed for assembly, welding, and light disassembly of pipes and fittings.

What safety precautions should I take?

Always wear safety goggles, gloves, and non-slip shoes. Keep children away and do not wear loose clothing.

How to maintain the RG1510 vise?

Clean it with a non-abrasive cloth. Do not use abrasive products. Store it in a dry place.

Where can I find spare parts?

Replacement jaws are available. Contact customer service via www.vevor.com/support for more information.

What is the warranty of the product?

Vevor offers an electronic warranty. Register your product at www.vevor.com/support to benefit from technical support.

Can I use the RG1510 vise to loosen old fittings?

No, it is intended for light disassembly only. Do not use it to loosen seized or old fittings.

USER MANUAL RG1510 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

Pipe Vise

Model: RG1510

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Pipe Vise

Model: RG1510

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

Thank you for using this product. In order to make sure that you can operate the machine correctly, read this instruction carefully before operation and keep it properly for future reference. Please be sure to read the precautions and safe rules on this page to ensure your safe use. This manual will outline safety warnings and precautions, operating, maintenance, and cleaning. The warnings and instructions reviewed in this manual cannot cover all possible conditions and situations that may occur. Caution and common sense are not built into this product, since we believe that the users will comply with these codes.

Please read ALL the instructions before using your machine.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite accidents. b. Keep children and bystanders away while operating. Distractions will cause you to lose control.

2. Personal safety

a. Stay alert, watch what you are doing and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of alcohol or medication. A moment of inattention while operating the Chain Vise may result in serious personal injury. b. Use safety equipment. Safety equipment such as dust mask, non-skid shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. d. Store idle Chain Vise out of the reach of children and do not allow persons unfamiliar with the Chain Vise to use it. This tool is dangerous in the hands of untrained users, who can break fingers or break feet and more. e. Inspect before every use. Do not use it if parts are loose or damaged. f. Do not apply this unit to any other purposes than the indicated usage. g. DO NOT CLEAN IT WITH ANY ABRASIVE MATERIAL.

Production Introduction

Pipe Vise Model RG1510

Aluminum Pipe Capacity: 1/8" to 1-1/2"

The lightweight aluminum body and hardened steel jaws of this vise weigh 2 pounds and 12 ounces. The tool features non-skid rubber feet that ensure stability during operation and protect surfaces from damage. Additionally, the jaws can be quickly replaced top and bottom in under 5 minutes using basic tools.

If you are wanting something easy to carry into your installs, the Bigfoot Ultra is the perfect fit. The compact lightweight design makes this unit ideal for installation and assembly.

Capacity:

Minimum: 1/8" Pipe.

Maximum: 1.5" Pipe and 1" fittings.

Features:

Non-skid rubber feet secure the tool during operation and prevent marring.

Aluminum body and hardened steel jaws weigh in at 2lbs 12oz.

Quick change jaws allow for replacement of top and bottom jaws in under 5 minutes with basic tools.

Applications:

1. Assembly and pre-fabrication of pipe, fittings, and valves.
2. Light duty disassembly. Not intended for breaking loose old fittings.
3. Soldering.

TECHNICAL INFO

Model No	RG1510
Pipe Capacity	1/8 to 1-1/2inch
Material:	Aluminium alloy and Iron
Color:	Red/Black
Product photo
Accessories	/
Size (mm)	270*115*120

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

A/S YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

New South Wales 2122 Australia

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey, TW184AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Pipe clamp model RG1510

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support