Vevor 2143B - Hand truck

2143B - Hand truck Vevor - Free user manual and instructions

Find the device manual for free 2143B Vevor in PDF.

📄 64 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vevor 2143B - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Vevor
Model 2143B
Product type Hand truck
Material Aluminum alloy + steel alloy
Normal load capacity (path 1) 550 lb (250 kg)
Extreme load capacity (path 1) 1000 lb (454 kg)
Normal load capacity (path 2) 220 lb (100 kg)
Extreme load capacity (path 2) 800 lb (363 kg)
Recommended load capacity (path 3) 220 lb (100 kg)
Use Transport of heavy loads on flat ground. Prohibited for transporting people or on stairs.
Maintenance Avoid prolonged sun exposure. Inspect accessories before use and replace defective parts.
Safety precautions Do not overload, do not transport people, do not use on stairs, avoid rapid movements near potholes.
Included accessories Not specified in the manual; refer to the installation diagram.
Manufacturer Shanghaimuxinmuyeyouxiangongsi, Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN
Customer service Technical support and electronic warranty certificate: www.vevor.com/support

Frequently Asked Questions - 2143B Vevor

What is the maximum load capacity of this hand truck?
The load capacity depends on the mode of use. For path 1, normal use does not exceed 550 lb (250 kg) and extreme 1000 lb (454 kg). For path 2, normal: 220 lb (100 kg), extreme: 800 lb (363 kg). Path 3 is limited to 220 lb (100 kg).
Can I use this hand truck to transport people?
No, it is strictly forbidden to transport people under any circumstances.
Can I use this hand truck on stairs?
No, this product cannot be used to go up or down stairs.
How to assemble the hand truck?
Prepare all installation parts and assemble the product following the instruction diagram and physical detail diagram provided in the manual.
What materials make up this hand truck?
The hand truck is made of aluminum alloy and steel alloy.
How to maintain the hand truck?
Avoid prolonged sun exposure to prevent aging. Inspect accessories for any signs of wear, cracks, or damage before use and immediately replace defective parts.
What safety precautions should be observed?
Do not place near flammable materials, do not transport people, do not use on stairs, do not overload, and avoid rapid movements near potholes.
Where to find technical support and warranty?
Technical support and electronic warranty certificate are available on the website www.vevor.com/support.
What are the modes of use (paths) mentioned?
The manual describes three paths: path 1 with normal load up to 550 lb, path 2 up to 220 lb, and path 3 up to 220 lb. Extreme capacities are indicated for paths 1 and 2.
What to do if a part is damaged?
Inspect the accessories before each use. If cracks, wear, or other damage are found, immediately replace the defective accessories. Contact customer service via www.vevor.com/support to obtain spare parts.

User questions about 2143B Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Hand truck in PDF format for free! Find your manual 2143B - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2143B by Vevor.

USER MANUAL 2143B Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

HAND TRUCK USER MANUAL

MODEL: 2143B

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODEL: 2143B

Vevor 2143B - HAND TRUCK USER MANUAL - 1

natural_image Three different types of metal multi-wheeled handshells, displayed against a white background (no text or symbols visible)

(photo for reference)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY INSTRUCTION

Vevor 2143B - SAFETY INSTRUCTION - 1

WARNING: Read and understand this manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury or damage to valuable property.

  1. Please do not put it near flammable materials.
  2. It is forbidden to carry people under any condition.
  3. This product cannot be used to go up or down stairs.
  4. Overload is strictly prohibited.
  5. Don't move too fast when passing pothole areas.

SAVE THESE INSTRUCTIONS

INSTALLATION NOTES

  1. Prepare all installation parts.

support heel block wheel support frame hand wheel Z shaped pad split pin M6X45 M8X55 M8 bolt for T-slot spare parts

  1. As shown below, assemble the product by Combining the installation instruction diagram and the physical detail diagram.

bend steel tube handle M6x45 hexagon head bolt(4 pcs) hand wheel(2 pcs) frame Z shaped pad with 3 holes (2 pcs) M8 prevailing torque type hexagon nut (6 pcs) U shaped tube M8 bolts for T-slot (2 pcs) foot plate M6 prevailing torque type hexagon nut (4 pcs) support shelf rear wheel (assembled) support heel block(2 PCS) split pin (4 pcs) φ16 wash (4 pcs) front wheel (2 pcs) M8x55 hexagon head bolt (4 pcs) wheel spindle

instruction diagram

M6x45 hexagon head bolt hand wheel U shaped tube support heel block wheel spindle and support frames Z shaped pad

Physical detail diagram

PRODUCT PARAMETERS

MaterialAlloy Aluminium +Alloy Steel
How to useVevor 2143B - INSTALLATION NOTES - 4Vevor 2143B - INSTALLATION NOTES - 5Vevor 2143B - INSTALLATION NOTES - 6
Way 1Way 2Way 3
Load capacityNormal use is no more than 550 pounds, and extreme use is no more than 1000 pounds.Normal use is no more than 220 pounds, and extreme use is no more than 800 pounds.No more than 220 lbs is recommended

MAINTENANCE

  1. Avoid prolonged exposure to the sun to avoid aging.
  2. Inspect accessories for wear, cracks and other damage before use, replace defective accessories immediately.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2 Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

ECREP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

UKREP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House London Road. Staines-upon-Thames. Surrey. TW18 4A>

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

natural_image Three different types of metal modular hangers shown from different angles (car, pulley, and ramp) against a white background.

PARAMÈTRES DU PRODUIT

Matériel

C/O YH Consulting Limited Bureau 147, Centurion House, Route de Londres, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

HANDWAGEN BENUTZERHANDBUCH

MODELL: 2143B

natural_image Three different types of metal modular hoods: a multi-huck, a multi-wheel jack, and a multi-cush cart (no text or symbols visible)

(Foto als Referenz)

Anleitungsdiagramm

M6x45 hexagon head bolt hand wheel U shaped tube support heel block wheel spindle and support frames Z shaped pad

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

elettronica www.vevor.com/support

MANUALE D'USO DEL CARRELLO A MANO

MODELLO: 2143B

natural_image Three different types of metal modular hoods: a multi-huck, a multi-wheel jack, and a multi-cush cart (no text or symbols visible)

Importato in AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Vevor 2143B - MANUALE D'USO DEL CARRELLO A MANO - 1

natural_image Three different types of metal modular hoods: a multi-huck, a multi-wheel jack, and a multi-cush cart (no text or symbols visible)

Importado a Australia: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importado a EE. UU.: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REPRESENTANTE CE

E-CrossStu GmbH

C/O YH Consulting Limited Oficina 147, Centurion House,

Carretera de Londres, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

natural_image Three different types of metal modular hoods: a multi-huck, a multi-wheel jack, and a multi-cush cart (no text or symbols visible)

schemat instrukcji

M6x45 hexagon head bolt hand wheel U shaped tube support heel block wheel spindle and support frames Z shaped pad

Importowane do AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Przedstaw ciel UE

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt nad Menem.

REP WIELKIEJ BRYTANII

YH CONSULTING LIMITED.

C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

natural_image Three different types of metal modular hoods: a multi-huck, a multi-wheel jack, and a multi-cush cart (no text or symbols visible)

(foto ter referentie)

HULP NODIG? NEEM CONTACT MET ONS OP!

instructie diagram

M6x45 hexagon head bolt hand wheel U shaped tube support heel block wheel spindle and support frames Z shaped pad

C/O YH Consulting Limited Kantoor 147, Centurion House, Londen Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e- garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

ANVÄNDARHANDBOK FÖR HANDLASTBILAR

MODELL: 2143B

natural_image Three different types of metal modular hoods: a multi-huck, a multi-wheel jack, and a multi-cush cart (no text or symbols visible)

(bild för referens)

BEHÖVER HJÄLP? KONTAKTA OSS!

instruktionsdiagram

M6x45 hexagon head bolt hand wheel U shaped tube support heel block wheel spindle and support frames Z shaped pad

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : 2143B

Category : Hand truck