SM-5308 - Hair Straightener Vevor - Free user manual and instructions

USER MANUAL SM-5308 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

HOT AIR STYLER

MODEL: SM-5308

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

MODEL: SM-5308

Product photo of a hairdryer with various designs including a brush, cap, and bulb (no text or labels visible)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions care before operating. VEVOR reserves a clear interpretation of our user m The appearance of the product shall be subject to the product you re Please forgive us that we won't inform you again if there are any te or software updates on our product.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic sa precautions should always be observed, including the following

READ ALL INSTRUCTIONS BEFORE USING

KEEP AWAY FROM WATER

DANGER

As with most electrical appliances, electrical parts are electrically live even when switch is off.

To avoid the risk of death by electric shock:

Always unplug this appliance from the electrical outlet immediately after using

▶ Do not use while bathing or in the shower.
▶ Do not place or shore this appliance where it can befallen or be pulled tub or sink.
▶ Do not place or drop into water or other liquid.
▶ Do not reach for an appliance that has been fallen into water. Unplug it immediately.

Unplug this appliance before clean in git.

WARNING

To avoid the risk of burns, fire, electric shock or injury:

▶An appliance should never be left unattended when it is plugged in.
▶ Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities or special needs

▶ Use this appliance only for its intended use as described in this manual.

▶ Never operate this appliance if it has a damaged cord or plug if it is not properly, f it has been dropped or damaged, or if it has been dropped into

▶ Keep the cord away from the heated surfaces. do not wrap the cord arc appliance.

▶ Never use while sleeping.

▶ Do not use outdoors or operate where aerosol(spray)products are being u or where oxygen is being administered.

▶ Do not use an extension cord.

This appliance is hot when in use. do not let eyes or bare skin touch her surfaces.

▶ Do not place the heated unit directly on any surface while it is hot or

▶ Always store this appliance and oord in a moisture-free area.

▶ Do not store it intemperaturesexceeding140°F(60°C).
▶ Do not plug or unplug this appliance when your hands are wet.

Feature

The hot air comb can be regarded as a salon hair dryer and styling comb (warm airbrush, straight hair comb, hair comb, curling brush, massage comb). It's suitable for dry and wet hair and also it can freely style hair to make h wavy or straight.

The brush is equipped with nylon needles and tufty bristles for easy care, unif shape, soft curved sides, smooth and rounded edges and wavy ends.

Safe to Use: CE, RoHS, ETL, certification. It can heat up fast and save more with 1200W power.

▶ AC120V/220V\~240V, 50/60Hz,1200W.
▶New design heating wire whose heating temperature is 45-110°C.
▶ Three heat and two speed settings to meet hair drying and styling flexibly. Removable brush head design for convenient carry.
▶ Hand diameter is more comfortable, slimmer and more ergonomic
▶ Improved noise reduction by optimising the structure of the housing, motor and hole arrangement. Enjoy the moment of use.
▶ Heat distribution with 360^ ventilation holes to dry faster and smoothen your hair easilier.
▶2m 360degree swivel cord and plug that can be configured according to different countries.

How To Use

▶ Prior to plugging in check the voltage on the rating label to ensure it corresponds to your local voltage.

Your brush is equipped with three heat settings“ ”, “ and “ ”. as a general guide, use the “ ” speed setting for rough drying for thicker hair, and the “ setting for finer Tand more precise control when styling. The “ setting can be used at the end to set the style.

Start at the back of the head when drying your hair and work forward.

▶DO not concentrate the airflow on any one area for an extended period of
▶USE CAUTION: Start with “” setting first to test the right temperature for your scalp.

NOTE: During the first few minutes of initial use you may notice smoke and slight odor. This is normal and will quickly disappear.

STEPS OF REPLACING THE COMB

Installation

Diagram showing a mechanical component with red arrows indicating motion or force direction (no text or symbols present)

Diagram showing a mechanical component with a red arrow indicating motion or force direction (no text or symbols present)

1. Hold the handle correctly, the hand that touch the brush head should we glove.

2. Grip the handle, rotate the brush head to left, when there is a "Da" sour installation is completed.

Disassembly

Illustration of a hand pressing down on a mechanical component with a red arrow indicating motion (no text or symbols)

Diagram showing a hand interacting with a device, indicated by red arrows pointing to the device and surrounding components.

1. Press and hold the button.

2. Twist right to remove the brush head.

Maintenance And Care

▶ Always unplug and allow to cool prior to cleaning

Periodic all、y inspect the air in take/filter screen on the back of the brush remove debris that may have accumulated.

▶ Build up may reduce air flow and damage the brush.
▶ Never use the following chemicals to clean the product: thinner, gasoline alcohols, or any other flammable chemicals.
▶ Do not wrap the cord around the appliance: this may cause cord worn.
▶ Use as oft dry cloth to clean.

Caution

Never allow the power cord to be pulled, twisted, or severely bent. never wrap cord tightly around the appliance. damage will occur at the high flex point of into the appliance, causing it to rupture and short circuit. Inspect the cord

frequently. stop using immediately if damage is visible or if unit stops or open intermittently.

Storage

When not in use, your iron is easy to store. Allow appliance to cool, then sin store out of reach of children in a safe, dry location. Do not jerk or strain plug connections do not wrap the power cable around the appliance.

Warranty Policy Instructions

Allow the Products are manufactured on the basis of the highest standards a will provide you with superior performance when used in accordance with the instructions in this manual.

As our products are 1-year replacement and 1-year warranty, if any problems please feel free contact us, we will reply you at the first time.

Product specification parameters

Brand	VEVOR	Rated voltage	220-240V~	120V~
Model	SM-5308	Rated frequency	50/60Hz	60Hz
/	/	Rated power	1200W	1200W

Intertek

Compliant with North American security certification.

Comply with the European security certification.

CORRECT DISPOSAL

This product is subject to the provision of european Directive 2012/1. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union.

This applies to the product and all accessories marked with this syr Products marked as such may not be discarded with normal domest

waste, but must be taken to a collection point for recycling electrical and electronic devices.

Manufacturer: Jiangxi Shengming Electronic Technology Co., Ltd

Address: Building 2, Block F1-03, Ganzhou Electronic Information Industry

Science and Technology City, Longnan Economic and Technological

Development Zone, Longnan City, GANZHOU CITY, Jiangxi Province.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

RE

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion Hou

London Road, Staines-upon-Thames, Surrey, TW18 4A

EC

RE

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Product display of a hair dryer with various designs including a brush, cap, and bulb (no text or labels visible)

BESOIN D'AIDE? CONTACTEZ-NOUS!

Diagram showing a mechanical component with red arrows indicating direction, no text or symbols present

Diagram showing a mechanical component with a red arrow indicating motion or force direction (no text or symbols present)

Illustration of a hand pressing down on a mechanical component with a red arrow indicating motion (no text or symbols)

Illustration of a hand interacting with a mechanical device, showing red arrows indicating movement or force (no text or symbols present)

Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

ROYAUME-UNI CONCERNANT

YH CONSULTING LIMITÉE.

A/S YH Consulting Limited Bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Product display of a hair dryer with various designs including a brush, cap, and bulb (no text or labels visible)

Diagram showing a mechanical component with red arrows indicating direction, no text or symbols present

Diagram showing a mechanical component with a red arrow indicating motion or force direction (no text or symbols present)

Illustration of a hand pressing down on a mechanical component with a red arrow indicating motion (no text or symbols)

Illustration of a hand interacting with a mechanical device, showing red arrows indicating movement or force (no text or symbols present)

2, Block F1-03, Ganzhou Electronic Information Industry Science and Technology City, Longnan Economic and Technological Development Zone, Longnan City, GANZHOU CITY, Provinz Jiangxi.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Product display of a hair dryer with various designs including a brush, cap, and bulb (no text or labels visible)

Diagram showing a mechanical component with red arrows indicating motion or force direction (no text or symbols present)

Diagram showing a mechanical component with a red arrow indicating motion or force direction (no text or symbols present)

Illustration of a hand pressing down on a mechanical component with a red arrow indicating motion (no text or symbols)

Illustration of a hand interacting with a mechanical device, showing red arrows indicating movement or force (no text or symbols present)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Importato negli

USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

graph TD
    A["Regno Unito"] --> B["RIF"]
    C["CE"] --> D["RIF"]
    B --> E["P"]
    D --> F["P"]

CONSULENZA YH LIMITATA.

C/O YH Consulting Limited Ufficio 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Francoforte sul Meno.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Product display of a hair dryer with various designs including a brush, cap, and bulb (no text or labels visible)

Diagram showing a mechanical component with red arrows indicating direction, no text or symbols present

Diagram showing a mechanical component with a red arrow indicating motion or force direction (no text or symbols present)

Illustration of a hand pressing down on a mechanical component with a red arrow indicating motion (no text or symbols)

Diagram illustrating a mechanical or electrical process with directional arrows and component layout, possibly indicating movement or assembly.

C/O YH Consulting Limited Oficina 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

PAG CE RE

E-CrossStu GmbH

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Product display of a hair dryer with various designs including a brush, cap, and bulb (no text or labels visible)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

www.vevor.com/support

Diagram showing a mechanical component with red arrows indicating direction, no text or symbols present

Diagram showing a mechanical component with a red arrow indicating motion or force direction (no text or symbols present)

Illustration of a hand pressing down on a mechanical component with a red arrow indicating motion (no text or symbols)

Diagram showing a hand interacting with a mechanical component, with red arrows indicating direction of movement or force.

C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt nad Menem.

P

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

HETELUCHTSTIJLER

MODEL: SM-5308

Product display of a hair dryer with various designs including a brush, cap, and bulb (no text or labels visible)

HULP NODIG? NEEM CONTACT MET ONS OP!

www.vevor.com/support

Diagram showing a mechanical component with red arrows indicating direction, no text or symbols present

Diagram showing a mechanical component with a red arrow indicating motion or force direction (no text or symbols present)

Illustration of a hand pressing down on a mechanical component with a red arrow indicating motion (no text or symbols)

Illustration of a hand interacting with a mechanical device, showing red arrows indicating movement or force (no text or symbols present)

Blok F1-03, Ganzhou Electronic Information Industry Science and Technology City, Longnan

Economic and Technological Development Zone, Longnan City, GANZHOU CITY,

Provincie Jiangxi.

C/O YH Consulting Limited Kantoor 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

P

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Product display of a hair dryer with various designs including a brush, cap, and bulb (no text or labels visible)

BEHÖVER HJÄLP? KONTAKTA OSS!

Diagram showing a mechanical component with red arrows indicating direction, no text or symbols present

Diagram showing a mechanical component with a red arrow indicating motion or force direction (no text or symbols present)

Illustration of a hand pressing down on a mechanical component with a red arrow indicating motion (no text or symbols)

Illustration of a hand interacting with a mechanical device, showing red arrows indicating movement or force (no text or symbols present)

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support