HI-FWR-100 - Wood rack Hillvert - Free user manual and instructions

USER MANUAL HI-FWR-100 Hillvert

This User Manual has been translated for your convenience using machine translation. Reasonable efforts have been made to provide an accurate translation; however, no automated translation is perfect nor is it intended to replace human translators. The official User Manual is the English version. Any discrepancies or differences created in the translation are not binding and have no legal effect for compliance or enforcement purposes. If any questions arise related to the accuracy of the information contained in the User Manual, please refer to the English version of those contents which is the official version.

NOTE: All of the information reported herein is based on data available at the moment of printing. The factory reserves the right to modify its own products at any moment without notice and incur any sanction. So, it is suggested to always verify possible updates.

1. TECHNICAL DATA

Parameter description	Parameter value
Product name	Firewood rack
Model	HI-FWR-100
Capacity	Max 100 kg
Dimensions	60 x 25 x 61.5 cm
Weight	2.85 kg

Attention:

1. Before use, ensure that the assembly is correct and there is no damage.
2. Install on a solid level floor to avoid damage or other problems.
3. For safety, please wear gloves when assembling, using and disassembling.
4. Ensure stability and balance after putting on firewood.
5. Do not use brute force to avoid deformation and damage of the frame.

Steps:

1. Use screws, nuts and a pad to install the horizontal frame with the vertical frame on both sides. Make sure the screws are properly tightened.

1. Verify that the installation is stable until the installation is completed.

For the disposal of the device please consider and act according to the national and local rules and regulations.

CONTACT

expondo Polska sp. z o.o. sp. k.