VAL-CJ160X - Juicer VALBERG - Free user manual and instructions

Product type	Juice extractor (citrus press)
Brand	Valberg
Model	VAL-CJ160X (995740)
Power supply	220-240 V~, 50-60 Hz
Rated power	160 W
Protection class	Class II
Dimensions (approx.)	20 x 20 x 30 cm
Weight (approx.)	1.5 kg
Bowl capacity	Up to the MAX mark (approx. 500 ml)
Material	Plastic, stainless steel (filter)
Main functions	Citrus juicing (oranges, lemons, grapefruits, etc.)
Included accessories	Large cone, small cone, filter, juice bowl, removable rod, lever handle
Spout	With open/close system to collect juice
Max continuous use	3 minutes, then 20 minutes cooling
Care and cleaning	Removable parts dishwasher safe; motor unit wiped with a damp cloth
Safety	Automatic stop when pressure on the cone is released; do not immerse the motor unit
Warranty	2 years against manufacturing defects (upon presentation of receipt)
Country of origin	Not specified (estimated: China)

Frequently Asked Questions - VAL-CJ160X VALBERG

How to assemble the VAL-CJ160X citrus press?

Place the removable rod on the motor shaft, then the transparent juice bowl. Insert the filter into the bowl. For the small cone, align it with the hexagonal sides of the rod. For the large cone, first attach it to the small cone by aligning the notches, then place the assembly on the rod.

How to use the spout?

Lift the spout to close it and accumulate juice in the bowl (do not exceed the MAX mark). Lower it to open and let the juice flow directly into a glass.

Which fruits can I juice with this appliance?

The appliance is designed for citrus fruits: oranges, lemons, grapefruits, limes, clementines, and tangerines. Use the small cone for small fruits and the large cone for large ones.

How to clean the parts of the citrus press?

Unplug the appliance. Wash the removable parts (cones, filter, bowl, rod) with warm soapy water or in the dishwasher. Wipe the motor unit with a damp cloth without ever immersing it. Dry all parts before storing.

Why does the motor stop during use?

The appliance has an automatic stop: if you release the pressure on the handle, the motor stops. If you press too hard, the motor may stall; reduce pressure. Also, do not use it for more than 3 minutes at a time.

What to do if my appliance does not start?

Check that the appliance is correctly assembled and the plug is properly inserted. Make sure the handle is lowered to apply pressure on the cone, as the motor only starts when the fruit is pressed.

Are the parts dishwasher safe?

Yes, all removable parts (cones, filter, bowl, rod) can be washed in the dishwasher. However, avoid very high temperatures to prevent deforming the plastic.

Can I juice whole fruits?

No, cut the fruits in half before juicing. Place the fruit half on the cone, cut side down, then lower the handle.

How to store the appliance?

Unplug it and store in a cool, dry place away from dust. Use the original packaging for long-term storage. Wrap the cord under the base.

What is the warranty of the VAL-CJ160X?

The warranty is 2 years from the date of purchase, against manufacturing or material defects, upon presentation of the receipt. It does not cover damages due to misuse.

USER MANUAL VAL-CJ160X VALBERG

_

| _

一

1

Thank you!

Thank you for choosing this VALBERG product. VALBERG products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won't let you down.

We're confident your new device will be a pleasure to use every day!

Welcome to ELECTRO DEPOT.

Table of Contents

Product overview

Parts

Product overview

Intended use

Specifications

Product usage

Before first use

Placement

Assembly

Use

Cleaning and maintenance

Cleaning and maintenance

Storage

Parts

A Large juicing cone
B Small juicing cone
c Strainer
D Transparent juice container
E Spout (close/open)
F Removable rod
G Motor unit (main unit)
H Base (with cable wrap underneath, not shown)
Power cable with plug
J Lever handle

Product overview

• Unpack and remove all labels from the unit except the nameplate. Please check that all parts are included and intact. If the unit is damaged or faulty, do not use it and take it to your retailer or after-sales service centre.
• WARNING: Keep all packaging out of the reach of children. There is a risk of accidents if children play with packaging materials.

Intended use

• This unit has been exclusively designed to squeeze citrus fruits, such as oranges, lemons, grapefruits, etc. This unit is intended for household use. It is not intended for commercial, industrial, or outdoor use. Do not use it for any other purpose.
• Any other use may damage the unit or cause injury.

Specifications

Model: 995740

Operating voltage: 220-240 V\~, 50-60 Hz

Rated power: 160 W

Protection class: Class II

Before first use

Clean the unit before first use or after a prolonged storage ( “Cleaning and maintenance” section).

Placement

• Place the motor unit on a level, firm and dry surface.
• Wrap excess power cable under the base (H) and pass the cable through the notch in the edge of the base.
• Do not place the motor unit on delicate surfaces. Some paints or synthetic coatings may react with the material of the suction feet, which can soften them and cause them to leave marks.

Assembly

1. Place the removable rod (F) on the motor shaft.
2. Place the transparent juice container (D) on the motor unit (G).

3. Place the strainer (C) inside the transparent juice container (D) by aligning the two flat sides of the middle hole with the flat sides of the container's tube.

4. To attach the cone to juicer:

- Place the small cone (B) onto the juicer by aligning it with the hexagonal sides of the removable rod (F). The small cone is suitable for juicing lemons, limes, clementines, and mandarins.

- To attach the large cone (A), first place it on top of the small cone (B), by aligning the two notches on the large cone with the tabs on the small cone and pressing them together. Then place the cone assembly onto the juicer as indicated above. The large cone is suitable for juicing grapefruits and oranges.

- To remove the large cone (A), separate it from the small one.

Use

- Wash and cut the citrus fruits in half to juice them.

1. Make sure the unit is assembled correctly.
2. Connect the power cable to a suitable mains socket.

3. Place a cup under the spout (E).

4. To use the spout (E):

- Lift the spout to close it if you want to temporarily collect the juice in the transparent container. Do not exceed the “MAX” fill line on the container.

B

Product usage

- Lower the spout to open it and allow the juice to run directly into the cup.

1. Place the cut citrus fruit on the cone.
2. Lower the handle (J) to press the fruit lightly. The juicer will start automatically and the juicing cone will rotate to scrape the pulp and squeeze the juice from the fruit. The strainer will separate the seeds and thick pulp from the juice.
3. Lift the handle to stop the juicer. The juicer stops as soon as the pressure is reduced on the cone.
4. To maximize juice extraction from the fruit, press the fruit onto the juicing cone several times.
5. Disconnect the power cable from the mains socket after each use.

IMPORTANT:

• When juicing, do not apply too much pressure on the juicing cone to avoid jamming the motor.
• To avoid overheating the unit, do not operate the unit in one session for more than 3 minutes at a time. Allow the unit to cool down for at least 20 minutes between each session.

Cleaning and maintenance

WARNING!

• Before cleaning, always unplug the unit from the power outlet and allow it to cool down completely.

• Never immerse the main unit, power cable or plug in water. Do not rinse the unit under the tap.

• Disassemble and clean the unit after each use.

• Wipe the motor unit with a soft, moist cloth. Make sure that no moisture gets inside the motor unit during cleaning.
• Clean the removable parts (small cone, large cone, strainer, transparent juice container, and removable rod) with water and a small amount of mild washing-up liquid. These parts are dishwasher-safe. Remove any pulp accumulated on the spout. Rinse and dry thoroughly.
• Never use corrosive cleaners, wire brushes, abrasive scouring pads or metal/sharp tools to clean your unit.
• Make sure the unit is completely dry before storing.

Storage

• Always unplug the unit from the mains before storing it.
- Store the unit in a fresh, dry and dust-free place, out of the reach of children and pets.
- Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.

Solid gray rounded rectangle shape with no text or symbols

Merci !

Solid gray rounded rectangle shape with no text or symbols

Bedankt!

Solid gray rounded rectangle shape with no text or symbols

¡Muchas gracias!

Solid gray rounded rectangle shape with no text or symbols

WARRANTY CONDITIONS

EN

This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase.* This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.

*proof of purchase required.

CONDITION DE GARANTIE

FR