OptiGrill GC7018 - Griddle TEFAL - Free user manual and instructions

Product type	Electric contact grill
Brand	Tefal
Model	OptiGrill GC7018
Power supply	220-240 V ~ 50/60 Hz
Power	2000 W
Automatic cooking programs	6 programs: Hamburger, Poultry, Fish, Red meat, Pork/Sausages/Lamb, Panini/Sandwich
Manual mode	5 temperature settings: 120°C, 160°C, 200°C, 245°C, 270°C
Automatic preheating	Yes (4 to 7 minutes)
Keep warm	Yes, automatic after cooking
Cooking plates	Non-stick, removable, dishwasher safe
Juice collection tray	Removable, dishwasher safe
Safety	Automatic shut-off after inactivity, thickness detection max 4 cm, power off if opened too long
Maintenance and cleaning	Plates and tray in dishwasher; body and heating element cleaned with a dry or damp cloth, do not immerse
Spare parts and repairability	Cooking plates and tray available from approved service center; any repair by an approved representative
Dimensions (L x W x H)	Approximately 40 x 30 x 15 cm
Weight	Approximately 4.5 kg

Frequently Asked Questions - OptiGrill GC7018 TEFAL

How to use automatic programs on the OptiGrill GC7018?

Select the program suitable for the food (Hamburger, Poultry, Fish, etc.) using the SELECT button, then press OK. The appliance preheats automatically; wait for preheating to finish (sound signal and fixed indicator). Open the grill, place the food, close it, and cooking starts automatically. A cooking indicator signals the level reached.

How to set the temperature in manual mode?

Press the Manual mode button several times to choose from 5 temperatures: 120°C, 160°C, 200°C, 245°C or 270°C. Confirm with OK. The appliance preheats to the chosen temperature. Place the food after preheating and monitor cooking by opening the grill slightly.

What to do if the appliance does not start or stops during use?

Check that the grill is properly closed and that the thickness of the food does not exceed 4 cm. If the appliance stopped automatically (opened too long or inactivity), unplug it, wait a few minutes, then plug it back in and restart. If the problem persists, contact customer service.

How to clean the cooking plates?

The plates and the juice collection tray are dishwasher safe. You can also wash them by hand with hot water and dish soap, then rinse and dry thoroughly. Do not use metal sponges or abrasive products to preserve the non-stick coating.

Can I use aluminum foil or parchment paper on the plates?

No, it is prohibited to place aluminum foil or any other object between the plates and the food, or between the plates and the heating elements. This could damage the appliance and affect cooking.

What is the maximum thickness of food for automatic cooking?

The thickness of the food must not exceed 4 cm. If the food is too thick, the appliance will not detect its presence and will switch to manual mode or not start.

Why does the appliance beep and what do the flashing indicators mean?

The beeps and flashes indicate various stages: preheating in progress, preheating finished, cooking in progress, or an error. For example, if all 6 indicators flash with a continuous beep, it may signal a failure; unplug and replug the appliance. For more details, refer to the troubleshooting guide.

How to start a second cooking after the first?

After removing the food, close the empty grill. The control panel lights up in program selection mode. Restart a preheating by choosing the same program or another, and press OK. Wait for the preheating end sound signal before adding new food.

Are the plates compatible with other appliances?

No, the cooking plates are designed only for the OptiGrill GC7018. Do not use them on a gas stove, electric hob, or in an oven. Use only accessories provided or purchased from an approved service center.

How to avoid damaging the non-stick coating?

Always use plastic or wooden spatulas to handle food. Never cut directly on the plates. Avoid metal sponges and abrasive cleaners. Do not heat the appliance empty for too long.

USER MANUAL OptiGrill GC7018 TEFAL

Illustration of a hand pressing down on a computer keyboard (no text or symbols visible)

2

Diagram showing a printer with control panel and a plastic cover, no readable text or symbols present

3

Illustration of a device with a label 'OK' and a logo, showing layered components (no readable text or symbols beyond the label)

4

Illustration of a steaming hot pot on a stove (no text or symbols)

Illustration showing hands pouring liquid from a bottle into a cloth, with a crossed-out prohibition symbol in the background.

5

Illustration of a hand pressing down on a mechanical component (no text or symbols visible)

6

Diagram showing installation of a wall socket with a hand holding a plug, accompanied by a prohibition symbol for cable termination.

7

Hand pointing at a touchscreen interface with icons for security, weather, and data management functions

8

Hand pointing at a control panel with icons for speed limit, power, and select button

9

OptiGrill Initial OK OK

10

20°C OK 4-7 minutes 12 13 Well done Medium well Medium Medium rare Rare Pre heating Automati

Cuisson

Close-up of a mechanical component with a curved internal structure and an arrow indicating motion (no text or symbols)

14 15

Illustration of a printer being placed on a textured surface with a black arrow indicating rotation (no text or symbols)

Illustration of a frying pan with a curved arrow indicating rotation (no text or symbols)

16 17

Tefel C:\Users\ndots 10000000000000000000000000000000000000000000000000000000000000000000000000000000000000

Close-up of a mechanical device with a rotating arrow indicating rotation (no visible text or symbols)

18 19

Close-up of a hand holding a knitted sweater with a curved arrow indicating rotation (no text or symbols)

300% of Smartphone

20

Illustration of a hand inserting a card into a device with an arrow indicating rotation (no text or symbols)

21 22

Illustration of a printer emitting steam with a stopwatch above it (no text or symbols)

Illustration of a hand using a tool to press down a white object on a griddle, with an arrow indicating rotation (no text or symbols present)

23

Control Site Main Site Main Site Main Site Main Site Main Site

24

Hand interacting with a digital interface showing a hand pressing a button labeled 'OK' and displaying various function keys like 'Start', 'End', and 'Apply'.

270°C 240°C 200°C 160°C 120°C Manual M M M P P

25

Terat 10°C 20°C 30°C 40°C 50°C 60°C 70°C 80°C 90°C 100°C 110°C 120°C 130°C 140°C 150°C 160°C 170°C 180°C 190°C 200°C 210°C 220°C 230°C 240°C 250°C 260°C 270°C 280°C 290°C 300°C 310°C 320°C 330°C 340°C 350°C 360°C 370°C 380°C 390°C 400°C 410°C 420°C 430°C 440°C 450°C 460°C 470°C 480°C 490°C 500°C

4-7 nutes

26 27
Cooking

Machan 300° 3 300° 3 300° 2 300° 1 300° 0

28 29

Close-up of a mechanical component with a curved arrow indicating motion or force (no visible text or symbols)

telat Control buttons

31

Illustration of a steam iron pressing down on a tray with a curved arrow indicating motion (no text or symbols)

30

Illustration of a steamer with rotating handle and blade, showing mechanical components (no text or symbols)

33

Close-up of a computer keyboard with a scroll wheel and scroll wheel, showing a black curved arrow indicating rotation (no text or symbols present)

34

Diagram showing a device being processed with a black arrow indicating rotation or process direction.

35

4 Refroidissement

Diagram showing a finger pressing a button with icons for 'OK', 'Cancel', and 'OK' labels, likely from a software interface.

36 37

Hand inserting a plug into an electrical outlet (no text or symbols visible)

2 H

38

Close-up of a car's side panel showing heat distribution and airflow direction (no text or symbols)

39 40

Illustration of a computer monitor with an open lid and a hand inserting a mouse into the screen (no text or symbols)

Illustration showing a hand washing food with a crossed-out black-and-white symbol (no text or labels)

41 42

Illustration of a hand cleaning a textured object from a mechanical device (no text or symbols visible)

43 44

Diagram showing a hand holding a device with crossed-out black lines, indicating prohibition or prohibition of use.

Illustration of a hand pressing down on a gridded metal tray (no text or symbols visible)

2

Illustration of a kitchen appliance with a lid and control panel, showing no text or symbols.

3

Illustration of a foldable device with a label 'OK' (no readable text or symbols on the device itself)

4

2 Voorbereiding

Illustration of a steaming hot pot with steam rising (no text or symbols)

Illustration showing hands pouring liquid from a bottle into a cloth, with a crossed-out prohibition symbol above.

5

Hand pressing down on a mechanical component (no text or symbols visible)

6

Diagram showing hand holding electrical socket connected to a plug, with no visible text or symbols

7

Hand pointing at a touchscreen interface with icons for security, data, and options

8

Diagram showing a finger pressing a button with icons for battery, power, and timer control

9

OptiGrill & Inid OK

10

Well done Medium well Medium Medium rare Rare Pre heating Automat 4-7 minuten

12 13

Close-up of a mechanical component with a curved arrow indicating motion or force (no text or symbols visible)

14 15

Illustration of a white iron cutting into a black mesh, with a black arrow indicating the process (no text or symbols present)

Illustration of a printer or printer being placed on a textured surface with a curved arrow indicating rotation (no text or symbols present)

16 17

Telat Control Panel 100% 20% 30% 40% 50% 60% 70% 80% 90% 100%

Illustration of a mechanical press or printer with an arrow indicating rotational motion (no text or symbols present)

18 19

Close-up of a sewing machine's collar being sewnled, showing the blade and handle (no text or symbols visible)

电容自动调节器

20

Illustration of a mechanical device with a scroll wheel and a white cover, showing a rotating arrow (no text or symbols)

21 22

Illustration of a printer emitting steam with a stopwatch above it (no text or symbols)

Illustration of a hand using scissors to cut a flat iron on a grater (no text or symbols visible)

23 24

Diagram of a device control panel with labeled buttons and icons, including 'Control panel' and 'Support panel'

Hand interacting with a touchscreen interface displaying a control panel with labeled buttons and a 'OK' button.

270°C 240°C 200°C 160°C 125°C Manual M R P

25

Terat MI

4-7 nuten

26 27
Bakken

Diagram showing a device with thermal management interface and labeled components, including 'Control' and 'Magnetic' labels.

Close-up of a mechanical component with a curved arrow indicating motion or force (no text or symbols visible)

28 29

Illustration of a frying pan with a curved arrow indicating rotation (no text or symbols)

tefat Cpfa3.0 + m1a1

30 31

Illustration of a steamer machine with open lid and cooling rack, showing mechanical components (no text or symbols)

Close-up of a hairpin being inserted into a device, showing rope routing (no text or symbols visible)

34 35

Baidu 2007 Baidu 2007

4 Afkoelen

Diagram showing a finger pressing a button with icons for 'Microsoft', 'Apple', and 'Sansk' labels

36 37

Hand inserting a plug into an electrical outlet (no text or symbols visible)

2 U

38

Close-up of a mechanical component with heat dissipation arrows (no text or symbols visible)

39 40

Illustration of a computer with an open lid and a stack of books inside, showing a mechanical device (no text or symbols present)

Diagram illustrating a hand washing with a magnified cross-section showing a crossed-out texture, likely indicating a filtration or anti-smoking concept.

41 42

Illustration of a hand pressing down on a mechanical device with a textured surface (no text or symbols visible)

43 44

Warning symbol with crossed-out black lines and a showerhead, indicating no protection or disinfection.

Illustration of a graduation cap placed on a podium with a computer monitor and lock (no text or symbols visible)

45

Diagram showing a printer with a box and a paper feeding into it, indicating a process or operation.

TheFool

1

Illustration of a hand pressing down on a car grille (no text or symbols visible)

2

Illustration of a printer with control panel and paper tray, no visible text or symbols

2 Vorbereitung

Illustration of a foldable device with a label 'OK' (no readable text or symbols on the device itself)

4

Illustration of a steaming hot pot with steam rising (no text or symbols)

Illustration showing a hand pouring liquid from a bottle into a cloth, with a crossed-out prohibition symbol above.

5

Illustration of a hand pressing down on a gridded metal component (no text or symbols visible)

6

Diagram showing hand holding electrical socket connected to wire, with prohibition symbol below

7

Hand pointing at a touchscreen interface with icons for 'Smartphone', 'Google', and 'Mobile' functions

8

Diagram showing a finger pressing a button with icons for battery, power, and timer control

9

OptiGrill & Inid OK

10

INITIAL OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK CANCEL OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel OK Cancel

12 13

Well done Medium well Medium Medium rare Rare Pre heating Automat

Close-up of a mechanical component with a curved arrow indicating motion or force (no text or symbols visible)

14 15

Illustration of a white iron cutting into a black mesh, with a black arrow indicating rotation (no text or symbols)

Illustration of a white iron cutting through a meshing machine with a black arrow indicating rotation (no text or symbols)

16 17

Telat Control Panel

Close-up of a mechanical device with a curved arrow indicating rotation or change (no visible text or symbols)

18 19

Close-up of a hairpin being adjusted to a piece of clothes (no text or symbols visible)

Illustration of a mechanical device with a scroll wheel and a white cover, showing a rotating arrow (no text or symbols)

21 22

Illustration of a printer emitting steam with a stopwatch above it (no text or symbols)

Illustration of a hand using scissors to cut a flatboard with a rotating arrow (no text or symbols)

23 24

Diagram of a device control panel with labeled buttons and icons, showing status indicators like 'OK', 'Cancel', and 'Control Path'.

Diagram showing a device with a control panel and labeled buttons, likely illustrating a system or system interface.

Close-up of a mechanical component with a curved arrow indicating motion or force (no text or symbols visible)

28 29

Illustration of a steamer being placed on a tray with a curved arrow indicating rotation (no text or symbols)

Tefat C:\Users\milk1

30 31

Close-up of a mechanical device with a scroll wheel and open lid, showing internal components (no text or symbols visible)

Close-up of a sewing machine needle being sewnled into a cloth (no text or symbols visible)

34 35

SARO

4 Abkühlen

Close-up of a finger pressing a button with icons for 'Microsoft Excel', 'Microsoft Excel', and 'select'

36 37

Hand inserting a plug into an electrical outlet (no text or symbols visible)

2 Std.

38

Close-up of a mechanical component with heat dissipation arrows (no text or symbols visible)

39 40

Illustration of a computer with an open lid and a stack of books inside, showing a mechanical device (no text or symbols present)

Diagram illustrating a hand washing with a magnified cross-section showing a crossed-out texture, likely indicating a filtration or anti-smoking concept.

41 42

Illustration of a hand pressing down on a mechanical device with a textured surface (no text or symbols visible)

43 44

Warning symbol with crossed-out black lines and a showerhead, indicating no protection or disinfection.

Illustration of a graduation cap placed on a podium with a computer monitor and lock (no text or symbols visible)

45

SAFETY INSTRUCTIONS IMPORTANT SAFEGUARDS

Use, maintenance and product installation guidelines: for your own safety, please read through all paragraphs of the instruction manual including the associated pictograms.

- This appliance is intended for indoor, domestic household use only. It is not intended to be used in the following applications, and the guarantee will not apply for:

—staff kitchen areas in shops, offices and other working environments;

-farm houses;

-by clients in hotels, motels and other residential type environments;

—bed and breakfast type environments.

- Before first use remove all packaging materials, stickers and accessories from the inside and the outside of the appliance.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by an adult responsible for their safety. Children should be supervised to ensure that they do not play with the appliance, and do not use as a toy.

- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in

a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.

• Keep the appliance and its cord out of reach of children less than 8 years.
• Never leave the appliance unattended when in use.
• Accessible surface temperatures can be high when the appliance is operating. Never touch the hot surfaces of the appliance.
• This appliance is not intended to be operated by means of an external timer or separate remote-control system.
• Fully unwind the power cord before plugging in the appliance.
• If the power supply cord is damaged, it must be replaced by the manufacturer or its after sales service in order to avoid any danger.
• Do not use an extension lead. If you accept liability for doing so, only use an extension lead which is in good condition, has a plug with an earth connection and is suited to the power rating of the appliance. Take all necessary precautions to prevent anyone tripping over an extension cord.
  • Always plug the appliance into an earthed socket.
• Make sure that the electric power supply is compatible with the power rating and voltage indicated on the bottom of the appliance.
• Use a sponge, hot water and washing up liquid to clean the cooking plates.
• Never immerse the appliance, its power cord or plug in water or any other liquid.

WARNING: Do not heat or pre-heat without the 2 cooking plates inside the grill.

Do

• Read the instructions carefully, common to different versions depending on the accessories supplied with your appliance, and keep them within reach.
• If an accident occurs, rinse the burn immediately with cold water and call a doctor if necessary.
• Before first use, wash the plates (see paragraph 5), pour a little cooking oil onto the plates and wipe with a soft cloth or paper kitchen towel.
• Position the power cord carefully, whether an extension is used or not, so that guests can move freely around the table without tripping over it.
• Cooking fumes may be dangerous for animals which have a particularly sensitive respiratory system, such as birds. We advise bird owners to keep them away from the cooking area.
  • Always keep the appliance out of the reach of children.
• Check that both faces of the plate are clean before use.
• To prevent damage to the plates, only use them on the appliance for which they were designed (e.g., do not place in an oven, on the gas ring or electric hot-plate, etc.).
• Ensure that the plates are stable, well positioned and correctly clipped to the appliance. Only use the plates provided with the appliance or bought from an Approved Service Centre.
  • Always use a wooden or plastic spatula to avoid damaging the cooking plates.
• Only use parts or accessories provided with the appliance or bought from an Approved Service Centre. Do not use them for other appliances or intention.

Do not

• Do not use the appliance outside.
• Never leave the appliance unattended when plugged in or in use.
• To prevent the appliance from overheating, do not place it in a corner or below a wall cupboard.
• Never place the appliance directly on a fragile surface (glass table, tablecloth, varnished furniture, etc.) or on a soft surface such as a tea-towel.
• Never place the appliance under a cupboard attached to a wall or a shelf or next to inflammable materials such as blinds, curtains or wall hangings.
• Never place the appliance on or near hot or slippery surfaces; the power cord must never be close to or in contact with hot parts of the appliance, close to a source of heat or resting on sharp edges.
• Do not place cooking utensils on the cooking surfaces of the appliance.

• Never cut food directly on the plates,

• Do not use metal scouring pads, abrasive wire wool or harsh scouring powder as this may damage the nonstick coating.

• Do not move the appliance when in use.
• Do not carry the appliance by the handle or metallic wires.
• Never run the appliance empty.
• Do not use aluminium foil or other objects between the plate and the food being cooked.
• Do not remove the grease collection tray while cooking. If the grease collection tray becomes full when cooking: let the appliance cool down before emptying.
• Do not place the hot plate on a fragile surface or under water.
• To preserve the non-stick properties of the coating, avoid excessive pre-heating with the appliance empty.
• The plates should never be handled when hot.
• Do not cook food in aluminium foil.
• To avoid spoiling your appliance, do not use flambé recipes in connection with it at any time.
• Do not place a sheet of aluminum or any other object between the plates and the heating element.
• Never heat or cook whilst the grill is open.
• Never heat up the appliance without the cooking plates.

Tips/information

• Thank you for buying this appliance, which is intended for domestic use only.
• For your safety, this appliance complies with the applicable standards and regulations - Low voltage directive - Electromagnetic compatibility - The environment - Materials in contact with food.
• On first use, there may be a slight odour and a little smoke during the first few minutes.
• Our company has an ongoing policy of research and development and may modify these products without prior notice.
• Do not consume foodstuff that comes into contact with the parts marked with logo
• If the food is too thick, the safety system will stop the appliance from working.

Environment

Environment protection first!

Your appliance contains valuable materials which can be recovered or recycled.

Leave it at a local civic waste collection point.

Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.

A1 A2 A4 A5 A6 A3 OptiGrill nitial A7 A8 Automatic Manual A9 B C D E B F

Description

A Control panel

A1 On/off button
A2 For automatic programs

A5 Manual mode "5 temperature settings"
A6 Temperature levels for manual mode.
A7 5 Leds : for temperature level in manual mode, or for cooking level for automatic programs.

B Body
C Handle
D Cooking plates

A3 6 Automatic cooking programs with "select" button

A4 OK button

A8 Cooking level for automatic programs.
A9 Preheating Led for automatic programs. F Power cord
E Drip tray
F Power cord

Guide of automatic cooking programs

Burger Panini / Sandwich

Poultry Fish

Red meat Pork/sausage/umb

Guide of manual cooking programs

Manual mode:

Traditional grill for manual operation with 5 different temperature settings (from 120°C to 270°C)

PREPARING THE APPLIANCE

1 Setting

Therma

顶盒顶盒

1

Illustration of a hand pressing down on a mechanical component (no text or symbols visible)

2

Illustration of a printer with a lid and control panel, showing no text or symbols

3

Illustration of a printer with a cover and a black base, labeled 'OK' (no text or symbols on the device itself)

4

1 Remove all packaging materials, stickers and accessories from the inside and the outside of the appliance. The handle sticker on the cooking level indicator can be changed, according to the language. You can replace it with the one on the inside of the packaging.
2 Before using for the first time, thoroughly clean the plates with warm water and a little dishwashing liquid, rinse and dry thoroughly.
3-4 Position the removable drip tray at the front of the appliance.

Illustration of a steaming hot dogon with steam rising (no text or symbols)

2 Preparation

Illustration showing a hand pouring liquid from a bottle into a cloth, with a crossed-out prohibition symbol above.

5

Illustration of a hand pressing down on a mechanical component (no text or symbols visible)

6

Diagram showing hand using a power socket to switch and disassembling cable, with no text labels

7

Hand pointing at a touchscreen interface with icons for 'Smart Home', 'Mouse', and 'Select'

8

5 For the best results you may wipe the cooking plates using a paper towel dipped in a little cooking oil, to improve the non-stick release.
5bis Ensure that the bottom cooking plate and the upper cooking plate are correctly positioned in the product before the pre-heating phase begins.
6 Remove any surplus oil using a clean kitchen paper towel.
7 Connect the appliance to an outlet. (note the cord should be fully unwound).
8 Press the On/Off button.

3a - AUTOMATIC cooking with 6 automatic programs

Automatic cooking - select a program and preheat before cooking:

Diagram showing a finger pressing a button with icons for battery, power, and 200kV power.

9

OptiGrill & Inid OK

10

9 If the food that you wish to cook is frozen, press the "frozen food" button.

10 Select the appropriate cooking mode according to what type of food you wish to cook.

6 automatic cooking programs

	Select this cooking program if you want to cook burgers.		Select this cooking program if you want to cook pork/sausage/lamb.
	Select this cooking program if you want to cook poultry.		Select this cooking program if you want to cook red meat.
	Select this cooking program if you want to cook a panini or sandwich.		Select this cooking program if you want to cook fish.

If you are uncertain about what cooking mode to use for other foods because it is not listed above, please refer to the “Cooking table for out of program food” page 64.

OptiGrill H1011 Automatic OK

iGrill + nba Automatic 000°C 200°C 150°C 100°C Manual

11

Initial OK Manual No. 100% No. 100% No. 100% No. 100% No. 100%

0°C Well done 0°C Medium well 0°C Medium 0°C Medium rare 0°C Rare Pre heating Automat

12 13

11 Press the « SELECT » button several times until you reach the desired program. Ensure that there is no food inside the grill When you have selected the wishing one then press the « OK » button.

NB: if you have selected the wrong program, return to stage 8.

12 The selected program light stays on. The appliance starts pre-heating and the preheat indicator flashes during all the pre-heating phase. You must wait the preheat indicator stops flashing before opening the Grill and adding the food. Wait for 4-7 minutes.

13 When the pre-heating is complete, a melody is displayed, the preheat indicator stops flashing and stays lit during all the cooking process.

Comments: At the end of pre-heating, if the appliance remains closed, the safety system will turn off the appliance.

Cooking

Close-up of a mechanical component with a curved arrow indicating motion or force (no text or symbols visible)

14 15

Illustration of a white iron cutting through a mesh with a black arrow indicating rotation (no text or symbols)

Illustration of a white iron cutting through a meshing machine with a black arrow indicating rotation (no text or symbols)

16 17

Telat

Close-up of a white electronic device with a black handle and circular base, showing a curved arrow indicating rotation (no text or symbols visible)

18 19

Close-up of a hand holding a knitted sweater with a black arrow indicating rotation (no text or symbols)

Diagram showing a hand holding a payment terminal with a price tag and directional arrow indicating price movement

20

14-15 After pre-heating, the appliance is ready for use. Open the grill and place the food on the cooking plate.

Comments: if the appliance remains open for too long, the safety system will turn off the appliance automatically.

16-17 The appliance automatically adjusts the cooking cycle (time and temperature) according to the food thickness and quantity.

Close the appliance to start the cooking cycle. The indicator "Rare" is flashing to indicate that the rare cooking level is in progress. A beep is heard and the indicator becomes lighted fixed once the level of cooking is reached (for the best results do not open or move your food during the cooking process).

Please note, especially on meat, it is normal that cooking result vary depending on type, quality and origin of food.

Note: for thinly-cut food, after close the device, the button « OK » is blinking and remain on « pre heating fixed ». Press « OK » to enable the appliance to recognize the food to be cooked and launch the cooking program.

18-19 When the cooking level is reached, the lights indicator stop blinking and you can hear a « beep ». The next cooking is blinking until to be reached. Open the appliance and remove your food when the desired level is reached.

20 Close the appliance without food on plate. The control panel will light up and set itself to 'choice of program' mode.

Restart to n°9 for a new cooking cycle in automatic mode.

Comment: the security system will turn off automatically if no program selection is made.

Illustration of a hand using scissors to lift a white object on a textured surface, with an arrow indicating rotation (no text or symbols)

21 22

Illustration of a printer emitting steam with a stopwatch above it (no text or symbols)

Illustration of a hand using a power iron to press down a grater, showing the blade and handle (no text or symbols)

23 24

Hold Date Hold Date to 8 Hold Date Hold Date to 10 Buy Prepare for

21-22-23 If you want to cook food to different personal tastes, open the grill and remove the food when it has reached the desired level and then close the grill and continue cooking the other food. The program will continue its cooking cycle until it reaches the 'well done' level.

24 Keep warm function

When the cooking process has ended the appliance will automatically go on the keep warm setting after having reached the "well done" level. If food is left on the grill it will continue to cook, while the cooking plates are cooling.

Comment: the safety system will turn the appliance off automatically after a certain amount of time.

Second cooking

If you want to cook more food, please refer to p. 61.

Cooking more food

If you want to cook a second batch of food, please pre-heat the appliance again (starting from point 9 in automatic mode or point 25) even if you want to cook the same type of food.

How to cook another batch of food:

After finishing your first batch of food:

1. Make sure the appliance is closed with no food inside.
2. Select the appropriate cooking mode/program (this step is necessary even if you decide to pick the same cooking mode than for the previous batch of food).
3. Press "OK" to start preheating. During this phase, the temperature indicator (in MANUAL mode) or the PREHEAT indicator (in automatic mode) will blink. This stage is mandatory even if your appliance seems hot.
4. The pre-heating is complete when an audible beep is heard and the cooking level indicator stops flashing.
5. After the pre-heating, the appliance is ready for use. Open the grill and place the food inside the appliance.

Important:

- Please note that any new batch of food, the pre-heating phase is mandatory. Remember to always have the grill closed and no food inside in order for the preheating to effectively function.

- Then wait for the pre-heating to be complete before opening the grill and place the food inside. N.B.: if the new pre-heating cycle is carried out immediately after the end of the preceding cycle, the pre-heating time will be reduced.

3b - MANUAL cooking with manual mode

Manual cooking - select a temperature and preheat before cooking:

If you select Manual mode, you have manual control of the cooking time. 5 different temperature settings are available for this manual mode. See specific manual quick start guide.

If you are uncertain about what cooking mode to use for other foods because it is not listed above, please refer to the "Cooking table for out of program food" page 64.

Hand-drawn interface showing a hand pressing a button on a control panel with labeled buttons and text.

270°C 260°C 230°C 140°C 125°C Manual

25

terat 200°C 1.5°C 1.5°C 1.5°C Mantel mi

4-7 nutes

26 27
Cooking

Diagram showing a device with labeled ports and a thermal gauge, likely illustrating a thermal or electrical system.

Close-up of a mechanical component with a curved arrow indicating motion or force (no visible text or symbols)

28 29

Illustration of a steam iron cutting through a tray with a curved arrow indicating rotation (no text or symbols)

tefat Control buttons + min1

30 31

25 Press the « Manual mode » button until you reach the desired temperature you want to cook your food. When you have reached the desired one then press the « OK » button.

NB: I f you have selected the wrong program, return to stage 8.

26 The led corresponding to the selected temperature will keep flashing during all the pre-heating phase.

Wait for 4-7 minutes

27 When the pre-heating is complete a melody is displayed the temperature indicator stops flashing and stays lit during the cooking process.

Comments: At the end of pre-heating, if the appliance remains closed, the safety system will turn off the appliance.

28-29 After pre-heating, the appliance is ready for use. Open the grill and place the food on the cooking plate

Comments: if the appliance remains open for too long, the safety system will turn off the appliance automatically.

30-31 Close the appliance to start the cooking cycle. The grill heats continuously to the selected temperature. Regularly check the cooking by opening lightly the grill.

OK 270°C 245°C 250°C 160°C 120°C W M M R P

32 33

Illustration of a steaming machine with rotating blade and base, showing mechanical components (no text or symbols)

Close-up of a computer keyboard with a scroll wheel and mouse pointer (no text or symbols visible)

34 35

Diagram showing a device with a label and arrow indicating rotation or change, likely illustrating a mechanical or electronic process.

4 Cooling

Diagram showing a finger pressing a button with icons for 'Microsoft', 'Google', and 'select'

36 37

Hand inserting a plug into an electrical outlet (no text or symbols visible)

2 H

38

32 If you want to modify the cooking level of temperature during the cooking process, press the manual mode button (the temperature indicator will flash until you reach this new instruction if the temperature is higher). When the level is reached, the lights indicator stop blinking.

Please note, especially on meat, it is normal that cooking result vary depending on type, quality and origin of food.

33-34 Open the appliance and remove your food when the desired cooking is got.

35 Close the appliance without food on plate. The control panel will light up and set itself to 'choice of program' mode.

Restart to n°21 for a new cooking cycle in manual mode.

Comment: the security system will turn off automatically if no program selection is made.

36 Press the on/off button to turn off the appliance.
37 Unplug grill from wall outlet.
38 Allow to cool for at least 2 hours.

To avoid accidental burns, allow grill to cool thoroughly before cleaning.

5 Cleaning and maintenance

Close-up of a car's air vent with mesh grille and directional arrows indicating airflow (no text or symbols)

39 40

Diagram showing a computer monitor with an open keyboard and a mouse inside, indicating the process (no text or symbols present)

Illustration of a hand holding food with a crossed-out grid pattern, next to a grater (no text or symbols)

41 42

Illustration of hands cleaning a food item from a machine (no text or symbols visible)

43 44

Warning symbol with crossed black lines and a device labeled 'Tecler' in the background

Illustration of a graduation cap placed on a car with a battery, no text or symbols present

45

39 Before cleaning, unlock and remove the plates to avoid damaging the cooking surface. The drip tray and the cooking plates are dishwasher safe.

40 The appliance and its cord cannot be placed in the dishwasher. The heating elements, visible and accessible parts, should not be cleaned after removing the plates. If they are very dirty, wait until the appliance has completely cooled down and clean them with a dry cloth. If you do not want to clean them in a dishwasher, you can use warm water and a little dishwashing liquid to clean the cooking plates, then rinse thoroughly to remove any residue. Dry thoroughly using a paper towel.

41 Do not use metallic scouring pads, steel wool or any abrasive cleaners to clean any part of your grill, only use nylon or non-metallic cleaning pads.

Empty the drip tray and wash in warm water and a little dishwashing liquid, dry thoroughly using a paper towel.

42 To clean the grill cover, wipe with a warm, wet sponge and dry with a soft, dry cloth.

43 Do not immerse the body of grill in water or any other liquid.

44 Always make sure grill is clean and dry before storing.

45 Any other servicing should be performed by an authorized service representative.

Trooble shooting

Problem Cause Solution
Buttons+ led	Preheating not respected.Switching “ON” of the appliance or starting an automatic cooking cycle with food between plates. The manual mode is automatically activated.	2 possible options:- choose the temperature setting by pressing the button and then press OK. Allow to cook, but you must monitor the cooking (manual mode). Temperature can be adjusted by button.- Open completely the appliance, remove the food, close the appliance properly, select a cooking program and press OK. Wait until end of preheating (Preheating indicator lighted fix).
After closing the appliance with food between plates, the appliance turns itself to manual mode with flashing + discontinue bip then after few seconds, it heats in manual mode under 270°C	Preheating time not completely done. Grill has been opened and food inserted on plate before end of preheating.	Allow to cook, but you must monitor the cooking because it is in manual mode. Temperature can be adjusted by button.orOpen the appliance, remove the food, close the appliance properly, and wait until end of preheating (Preheating indicator lighted fix).
The appliance stops during the cycle of preheating or cooking.	The appliance has been kept open for too long while cooking.The appliance has been idle too long after the end of preheating or keep warm.	Unplug the appliance and wait few minutes.Plug again your appliance and switch ON.
The 6 indicator lights flashing + one of the ing+ discontinue bip	Appliance failure.	Unplug the product and contact your customer service.
The appliance no longer beeps
After the preheating , I have put my food on the grill but cooking cycle does not start.The indicator stays on Pre heatingand button flashing	Your food is thicker than 4 cm. Food must not be thicker than 4 cm.
	You have not completely opened the grill to place the food.	Completely open the grill then close it.
	Not sensing the food. The food thickness too thin, “OK” is flashing.	Confirm the start of the cooking by pressing the button.
The 6 indicator lights flashing+ one of the ing+ discontinue or continue bip	Appliance failure:Appliance stored or used in a room that is too cold.Appliance over heating.	Unplug the appliance and wait few minutes.Plug again your appliance and switch ON.If the problem persists, contact your Customer service.

Tip, especially for meat: the cooking results on the preset programs may vary depending on origin, cut and quality of the food being cooked, the programs have been set and tested for good quality food.

Similarly, the thickness of the meat has to be taken into account during cooking; you cannot cook food that is thicker than 4 cm.

Cooking Guide (automatic programs)

Dedicated program		Cooking level color indicator
		Rare	Medium rare	Medium	Medium well	Well-done
	Red meat
	Burger
	Panini/Sandwich
	Fish
	Poultry					[YHGS]
	Pork/sausage/lamb

Cooking Guide (including Manual Mode)

Food		Cooking program	Cooking level
Bread	Slices of bread, toasted sandwiches		medium
	Burger: (after pre-cooking the meat)		medium
Meat & Poultry	Pork fillet (boneless), pork belly	[DADS]	medium
	Lamb (boneless)		well-done
	Frozen chicken nuggets, dark chicken	[GZSA]	well-done
	Pork belly		medium
	Slice of ham to cook		medium
	Marinated chicken breast		rare
	Duck breast		rare
Fish	Whole trout		well-done
	Shelled prawns		medium
	King prawns (with and without shells on)		medium
	Tuna steak		rare
Manual modeSee specific manual quick start guide	Grilled vegetables and fruits(need to be of same cut and thickness)		5 different temperature settings

For frozen food, it is less before selecting your program.

INDICE

• NORME DI SICUREZZA / AVVERTENZE IMPORTANTI p.67
- CHE COSA FARE p.68
• CHE COSA NON FARE p.69
• VISTA ESPLOSA p.71
- DESCRIZIONE p.72
• PREPARAZIONE DELL'APPARECCHIO p.73
• COTTURA AUTOMATICA p.74
• COTTURA MANUALE p.76
• COTTURA DI UNA SECONDA PORZIONE p.77
• RAFFREDDAMENTO p.78
• PULIZIA E MANUTENZIONE p.79
• RISOLUZIONE DEI PROBLEMI p.80
• GUIDA DI COTTURA (PROGRAMMI AUTOMATICI) p.81
• GUIDA DI COTTURA (CON MODALITÀ MANUALE) p.81

ISTRUZIONI DI SICUREZZA AVVERTENZE IMPORTANTI

Diagram showing a box being opened with an arrow indicating rotation, next to a vehicle labeled 'Truckbox' with Chinese characters.

Tecel 100% 200% 300%

1

Hand pressing down on a gridded surface, no text or symbols visible

2

Close-up of a printer's lid and cover with a black arrow pointing to the cover area (no visible text or symbols)

3

Close-up of a mechanical device with a label showing 'OK' (no readable text or symbols on the device itself)

4

2 Preparazione

Illustration of a steaming hot dog (no text or symbols)

Illustration showing hands pouring liquid from a container into a cloth, with a crossed-out prohibition symbol above.

5

Illustration of a hand pressing down on a gridded metal tray (no text or symbols visible)

6

Diagram showing hand installation of an electrical socket with a fuse, accompanied by a prohibition symbol for wiring failure.

7

Hand pointing at a touchscreen interface with icons for security, data, and selection functions

8

Diagram showing a finger pressing a button with icons for battery, power, and control buttons labeled 'BANET PERIOD' and 'SALOAC'.

OptiGrill 通 irid

9
10

OptiGrill @ Initial Automatic OK

iGrill + nida Automatic 200°C 200°C 500°C 1000°C 1500°C 2000°C Automatic

11

Temperature 250°C 300°C 350°C 400°C 450°C 500°C Normal Moderate High Normal Normal Normal Normal

4-7 minuti

12 13

Close-up of a mechanical component with a curved arrow indicating motion or force (no text or symbols visible)

14 15

Illustration of a white iron cutting through a mesh with a black arrow indicating rotation (no text or symbols)

Illustration of a white iron cutting through a black mesh with a curved arrow indicating rotation (no text or symbols)

16 17

Telat Control Panel 100% 20% 30% 40% 50% 60% 70% 80% 90% 100%

Close-up of a mechanical device with a curved arrow indicating rotation or change (no visible text or symbols)

18 19

Close-up of a hand holding a knitted sweater with a curved arrow indicating rotation (no text or symbols)

移动设备

20

Illustration of a mechanical device with a rotating arrow indicating rotation (no text or symbols)

21 22

Illustration of a printer emitting steam (no text or symbols)

Illustration of a hand using scissors to cut a flat iron on a grater, with an arrow indicating rotation (no text or symbols present)

23 24

Diagram of a device control panel with labeled buttons and icons, showing status indicators like 'OK', 'Cancel', and 'Finish'.

Hand interacting with a touchscreen interface displaying a control panel with labeled buttons and a 'OK' button.

270°C 260°C 231°C 140°C 125°C Manual M R P

25

terat 200°C 100°C 150°C 100°C Maserat m

4-7 minuti

26 27
Cottura

Diagram showing a device with labeled ports and a thermal gauge, likely illustrating a thermal or electrical system.

Close-up of a mechanical component with a curved arrow indicating motion or force (no visible text or symbols)

28 29

Illustration of a steam iron cutting down on a metal tray with a curved arrow indicating rotation (no text or symbols)

tefat Control buttons + mlet

30 31

Illustration of a steamer machine with open lid and cooling rack, showing airflow direction (no text or symbols)

Close-up of a mechanical device with a curved arrow indicating rotation or movement (no text or symbols visible)

34 35

Diagram showing a hand pressing down on a device with an arrow indicating rotation or change, labeled with Chinese text.

4 Raffreddamento

INTRODUCTION SELECT

36 37

Hand inserting a plug into an electrical outlet (no text or symbols visible)

2 ore

Close-up of a mechanical component with heat dissipation arrows (no text or symbols visible)

39 40

Illustration of a computer keyboard being opened into a device (no text or symbols visible)

Diagram illustrating a hand washing with a crossed-out fabric, showing a magnified view of the fabric being crossed out.

41 42

Illustration of a hand using a computer to press a food item into a tray (no text or symbols visible)

43 44

Tearbox

Illustration of a graduation cap placed on a base with a digital display (no text or symbols visible)

45

Hand pressing down on a mechanical component (no text or symbols visible)

2

Illustration of a printer with a cover and a tray, showing no text or symbols.

3

Illustration of a printer with a cover and a 'OK' button, no text or symbols present

4

2 Preparación

Illustration of a steaming hot dog (no text or symbols)

Illustration showing hands pouring liquid from a bottle into a cloth, with a crossed-out prohibition symbol above.

5

Hand pressing down on a mechanical component (no text or symbols visible)

6

Diagram showing hand installation of a power outlet with a fuse, accompanied by a prohibition symbol for cable termination.

7

Hand pointing at a touchscreen interface with icons for 'Microsoft', 'Google', and 'Microsoft'.

8

Diagram showing a finger pressing a button with icons for battery, power, and timer control

9

OptiGrill & Inid OK

10

Close-up of a mechanical component with a curved arrow indicating motion or force (no text or symbols visible)

14 15

Illustration of a white iron cutting through a mesh with a black arrow indicating rotation (no text or symbols)

Illustration of a white iron cutting through a mesh with a black arrow indicating rotation (no text or symbols)

16 17

Telat

Close-up of a mechanical device with a curved arrow indicating rotation or movement (no visible text or symbols)

18 19

Close-up of a sewing machine's cable being adjusted with a black arrow indicating rotation (no text or symbols visible)

Illustration of a mechanical device with a scroll wheel and a white cover, showing a rotating arrow (no text or symbols)

21 22

Illustration of a printer emitting steam with a stopwatch above it (no text or symbols)

Illustration of a hand using scissors to cut a flat iron on a grater (no text or symbols visible)

23 24

Diagram of a device control panel with labeled buttons and icons, including 'Control panel' and 'Support panel'

Hand interacting with a touchscreen interface displaying a control panel with labeled buttons and a 'OK' button.

270°C 260°C 231°C 140°C 125°C Manual M R P

25

terat 200°C 100°C 150°C 100°C Maserat mi

4-7 nutos 200°C 160°C 120°C

26 27
Cocción

Diagram showing a device with labeled ports and a thermal gauge, likely illustrating a thermal or electrical system.

Close-up of a mechanical component with a curved arrow indicating motion or force (no visible text or symbols)

28 29

Illustration of a steam iron cutting down on a metal tray with a curved arrow indicating rotation (no text or symbols)

tefat Control Panel + molar

30 31

Illustration of a steamer machine with open lid and internal components, showing motion arrow (no text or symbols)

Close-up of a hairpin being inserted into a computer mouse, showing the blade and handle (no text or symbols visible)

34 35

Baidu 2007 Baidu 2007

4 Enfriamiento

Diagram showing a finger pressing a button with icons for 'Microsoft Excel', 'Microsoft Excel logo', and 'select'

36 37

Hand inserting a plug into an electrical outlet (no text or symbols visible)

2 horas

38

Close-up of a mechanical component with heat dissipation arrows (no text or symbols visible)

39 40

Illustration of a computer with an open lid and a stack of books, showing a mechanical device (no text or symbols present)

Diagram illustrating a hand holding food with a crossed-out grid, alongside a photo of a grater and a computer.

41 42

Illustration of a hand using a computer to clean or discard a food item (no text or symbols visible)

43 44

TearFear 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80

Illustration of a graduation cap placed on a platform with a computer monitor and lock (no text or symbols visible)

45

Printed Print

TheFool

1

Illustration of a hand pressing down on a striped surface (no text or symbols)

2

Illustration of a device with a control panel and a separate tray, showing no text or symbols.

3

Illustration of a foldable device with a label showing 'OK' (no readable text or symbols on the device itself)

4

2 Preparação

Illustration of a steaming hot pot on a stove (no text or symbols)

Illustration showing hands pouring liquid from a bottle into a cloth, with a crossed-out prohibition symbol above.

5

Hand pressing down on a mechanical component (no text or symbols visible)

6

Diagram showing hand installation of an electrical socket with a fuse, accompanied by a prohibition symbol for wiring termination.

7

Hand pointing at a touchscreen interface with icons for security, data, and options

8

Diagram showing a finger pressing a button with icons for battery, power, and timer control

9

OptiGrill & Iridl OK

10

OptiGrill @ Initial Automatic OK

iGrill + nba Automatic 80°C 240°C 100°C 150°C 100°C Control

11

Initial OK 100% 500% 200% 100% Main Next Home Maximum Minimum Maximum Max Next Home Next

Well done Medium well Medium Medium rare Rare Pre heating Automat 4-7 minutos

12 13

Close-up of a mechanical component with a curved arrow indicating motion or force (no text or symbols visible)

14 15

Illustration of a white iron cutting through a mesh with a black arrow indicating rotation (no text or symbols)

Close-up of a white iron cutting machine with a black handle, showing mechanical components and a curved arrow indicating rotation (no text or symbols)

16 17

Teist

Close-up of a mechanical device with a curved arrow indicating rotation or movement (no visible text or symbols)

18 19

Close-up of a hand holding a knitted sweater with a black arrow indicating rotation (no text or symbols)

电感自动控制面板

20

Illustration of a hand using a power iron to lift a white box, with a curved arrow indicating rotation (no text or symbols)

21 22

Illustration of a printer emitting steam with a stopwatch above it (no text or symbols)

Illustration of a hand using scissors to cut a flatbed iron on a grater, with an arrow indicating rotation (no text or symbols present)

23 24

Diagram of a device control panel with labeled buttons and icons, including 'Control panel' and 'Support panel'

Hand-drawn interface screenshot showing a hand pointing at a control panel with labeled buttons and icons

270°C 240°C 235°C 160°C 120°C Manual M N R P

25

4-7 minutos

26 27

Close-up of a mechanical component with a curved arrow indicating motion or force (no text or symbols visible)

28 29

Illustration of a frying pan with a curved arrow indicating rotation (no text or symbols)

tefat

30 31

Illustration of a steaming machine with rotating blade and handle, showing mechanical components (no text or symbols)

Close-up of a hairpin being inserted into a computer mouse, showing the cable being inserted (no text or symbols visible)

34 35

Diagram showing a hand pressing down on a device with a black arrow indicating rotation or change, labeled with Chinese text.

4 Arrefecimento

Diagram showing a finger pressing a button with icons for 'Microsoft Excel', 'Microsoft', and 'Google' functions.

36 37

Hand inserting a plug into an electrical outlet (no text or symbols visible)

2 Horas

38

Close-up of a mechanical component with heat dissipation pattern (no text or symbols visible)

39 40

Illustration of a computer with an open lid and a stack of books inside, showing a mechanical device (no text or symbols present)

Illustration of a hand holding food with a crossed-out black-and-white grid pattern, next to a grater (no text or symbols)

41 42

Illustration of a hand using a computer to clean or discard a food item (no text or symbols visible)

43 44

TearFear 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80

Illustration of a graduation cap placed on a podium with a computer monitor and lock (no text or symbols visible)

45

Diagram showing a printer with a box and a paper feeding into it, indicating a process or operation.

TheFool

1

Hand pressing down on a gridded metal tray (no text or symbols visible)

2

Illustration of a food processor with control panel and tray, no visible text or symbols

3

ETOIMO

4

2 Προετόμασία

Illustration of a steaming hot pot on a grater (no text or symbols)

Illustration showing a hand pouring liquid from a bottle into a cloth, with a crossed-out prohibition symbol in the background.

5

Illustration of a hand pressing down on a grater (no text or symbols visible)

6

Diagram showing hand installing a socket with an electrical outlet, accompanied by a prohibition symbol for wiring failure.

7

Hand pointing at a touchscreen interface with icons for Security, Network, and Smart.

8

Diagram showing a finger pressing a button with icons for battery, power, and control buttons labeled 'BANANA' and 'SABAC'.

9

OptiGr31 选 IPI Mode

10

IN1201 OK Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Temperature Tensile

12 13

0°C Well done 0°C Medium well 0°C Medium 0°C Medium rare 0°C Rare Pre heating Automa

Close-up of a mechanical component with a curved arrow indicating motion or force (no text or symbols visible)

14 15

Illustration of a white iron cutting into a mesh with a black arrow indicating rotation (no text or symbols)

Illustration of a printer or printer being placed on a surface with a curved arrow indicating rotation (no text or symbols present)

16 17

Teist

Close-up of a mechanical device with a curved arrow indicating rotation or change (no visible text or symbols)

18 19

Close-up of a hand holding a knitted sweater with a black arrow indicating rotation (no text or symbols)

电感器 电感器

20

Illustration of a hand using a power iron to lift a white object, with no visible text or symbols.

21 22

Illustration of a printer emitting steam with a stopwatch above it (no text or symbols)

Illustration of a hand using a tool to press down an open book on a griddle, with no visible text or symbols.

23 24

Diagram of a device control panel with labeled buttons and icons, showing status indicators like 'Control' and 'Display'.

Hand interacting with a touchscreen interface displaying a control panel with icons and text labels

270°C 240°C 207°C 160°C 120°C Manual W M M R P

25

Close-up of a mechanical component with a curved arrow indicating motion or force (no text or symbols visible)

28 29

Illustration of a white iron pressing down on a textured surface with black arrows indicating motion (no text or symbols)

Telat Control buttons + mini

30 31

Close-up of a white electronic device with black handle and gray mesh base, showing internal components and a circular arrow indicating rotation (no text or symbols)

Close-up of a sewing machine needle being cut with scissors, showing blade and handle (no text or symbols visible)

34 35

Diagram showing a device with Chinese text labels and an arrow indicating rotation or change, likely illustrating a mechanical or electronic process.

4 Ψύξη

Diagram showing a finger pressing a button with icons for 'Smart Master', 'S', and 'BASIC' labels

36 37

Hand inserting a plug into an electrical outlet (no text or symbols visible)

2 H

Close-up of a car's side panel showing airflow or heat distribution (no text or symbols visible)

Diagram showing a computer monitor with an open lid and a keyboard inserted, indicating the process (no text or symbols present)

39 40

Illustration of a hand holding food with a crossed-out black-and-white grid pattern, next to a grater (no text or symbols)

41 42

Illustration of hands cleaning a textured object from a machine (no text or symbols visible)

Warning symbol with crossed-out black lines and a hand holding a faucet, indicating no protection or resistance.

43 44

Illustration of a graduation cap placed above a test machine with a key inserted (no text or symbols visible)

45