Glassy C400C - Kettle Eldom - Free user manual and instructions

USER MANUAL Glassy C400C Eldom

1. Connect the kettle only to a suitably earthed socket

compatible with the parameters indicated in the instructions.

2. The appliance should be placed on a stable and dry

3. Before operating, make sure that there is water inside the

kettle. You should not switch the kettle on when empty.

4. You must not exceed the maximum water level mark.

Filling over the maximum mark on the exterior of the kettle may result in the boiling water splashing out from the kettle (which may result in ashort-circuit).

5. The device can be used by children aged 8 and older

and by persons with limited physical, sensory or mental capabilities, or persons without sucient experience and knowledge only under supervision or if previously instructed on the safe use of the appliance and the possible risks. Children shall not play with the appliance. Cleaning and maintenance that are the responsibility of the user shall not be carried out by children without supervision. Protect the appliance and the power cord against children under 8 years old.

6. Do not leave the kettle unattended when in use, when

plugged-in or containing hot water, the kettle may expose children to hazard, if left unattended.

7. Never immerse the kettle in water while washing-up.

8. You should be cautious about the steam coming from

the kettle during the heating process.

9. This appliance is designed for domestic use only; when

used for industrial purposes outside the product’s specications, or used not in accordance with the instructions,no liability is assumed and the warranty is nullied.9

10. Do not use the appliance, if the power cord is damaged

or if the appliance fell down or was otherwise damaged. The appliance should be repaired by an authorised Service Centre; alist of Service Centres can be found in the attachment and on the website www.eldom.eu.

11. The appliance can be repaired only in an authorised

Service Centre. Any modernisation or application of spare parts or elements other than the original ones is forbidden and dangerous for the user.

12. The company Eldom Sp. zo.o. shall not be liable for any

damage caused by inappropriate use of the appliance.

13. This kettle must be used with the power base supplied.

WARNING: Plastic bag can be dangerous, to avoid danger

of suocation keep this bag away from babies and children.10 OPERATING INSTRUCTION

CORDLESS KETTLE C400

TECHNICAL DATA - power: 2000W - mains voltage: 230V ~50Hz - 1.5 litre capacity Cordless kettle C400 is for boiling water. It is possible to boil 0.5 – 1.5 litre of water in the kettle. The kettle base (7) must be put on aat and dry surface. In the base there is some space for an excess cord. It is important for the cord to be led from the base (7) through aspecial groove so that the appliance could be stable.Before using the kettle for the rst time ll it up (2-3 times) with water, boil the water and then empty the kettle. The kettle can be lled with water directly through the spout (1) or after opening the lid (2). In order to open the lid (2) you must press the button (3). The lid should be closed by pressing until you hear it snapp. The kettle must not be lled up when on the base. The minimum level of boiling water is 0.5 l. The maximum water level (1.5 l) is marked on the indicator (6). The kettle starts working after putting the switch (5) in the position ‘I’. The kettle working is signalled by the control lamp. The kettle switches o automatically after the water has boiled. You can stop heating water at any time by putting the switch (5) in the position ‘0’. GENERAL DESCRIPTION1. Spout2. Lid3. Lid release switch4. Handle5. On/o switch6. Water level indicator7. Base

CLEANING AND MAINTENANCE

Allow the unit to cool down completely before cleaning. Do not immerse the kettle in water while washing up. The outside of the kettle may be wiped over with adamp cloth and washing-up liquid. Water stains inside the kettle can be removed by rubbing with acloth moisten with white vinegar; rinse the inside with water afterwards. Limescale should be removed in the following way: Fill the kettle with 0.6 litre of water and bring it to boil. Switch the kettle o and disconnect the kettle from the power supply. Pour 0.1 litre of white vinegar into the kettle. Allow to stand overnight. Discard the solution and rinse the inside with water. Fill the kettle with 1 litre of water and bring to boil. Discard the water and rinse the inside with water. If the scale is persistent, the cleaning should be done in the following way: - ll the kettle with 0.6 litre of white vinegar. Bring the vinegar to boil and leave the hot solution inside the kettle for about 30 minutes. Bring the vinegar to boil again. Discard the vinegar and rinse the inside with water. Fill the kettle with 1.0 litre of water and bring it to boil. Discard the water and rinse the inside with water. No timely removal of the scale from the heating element results in the heating element’s quicker wear. Any damage resulting from applying harsh descalling products available in the market are not covered by the producer’s warranty. If the power cord is damaged, it can be replaced only by an especially constructed one (with appropriate plugs and endings). FILTER The lter provided is made of mesh retaining scale deposits. The lter does not remove the scale, but it prevents any deposits from getting inside the kettle while the water is being poured in. The lter should be cleaned regularly. Hard water may block the lter after boiling water acouple of times. The lter can be removed and rinsed with water or cleaned with asoft brush. ENVIRONMENTAL PROTECTION - The appliance is made of materials which can be recycled. - It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.