F55062VI0 - Dishwasher AEG - Free user manual and instructions

USER MANUAL F55062VI0 AEG

DISHWASHER USER MANUAL

In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags… Visit the webshop at: www.aeg.com/shop 27CONTENTS 29 Safety instructions 32 Product description 33 Control panel 35 Use of the appliance 36 Setting the water softener 37 Use of dishwasher salt 38 Use of detergent and rinse aid 39 Multitab function 40 Loading cutlery and dishes 42 Washing programmes 43 Setting and starting a washing programme 45 Care and cleaning 46 What to do if… 49 Technical data 49 Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information Subject to change without notice. 28 ContentsSAFETY INSTRUCTIONS Before the installation and use, read this manual carefully:

• For your safety and the safety of your property.

• To help the environment.

• For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or give it to a different person. The manufacturer is not responsible if an incorrect installation and use causes damage. Children and vulnerable persons safety

• Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge to use the appliance. They must have su- pervision or instruction for the operation of the appliance by a person who is responsible for their safety.

• Children must get supervision to make sure that they do not play with the appliance.

• Keep all packaging away from children. There is the risk of suffocation or injury.

• Keep all detergents in a safe area. Do not let the children touch the detergents.

• Keep children and pets away from the appliance when the door is open. General safety

• Do not change the specifications of this appliance. There is the risk of injury and damage to the appliance.

• Obey the safety instructions from the detergent manufacturer to prevent burns to eyes, mouth and throat.

• Do not drink the water from the appliance. Particles of detergent can stay in your appli- ance.

• Do not keep the appliance door open without supervision. This to prevent injury and to fall on an open door.

• Do not sit or stand on the open door. Use

• The appliance is only for domestic use. Do not use the appliance for other uses to pre- vent injury to persons and damage to property.

• Only use the appliance to clean accessories that are applicable for dishwashers.

• Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Risk of explosion or fire.

• Put the knives and all items with sharp points in the cutlery basket with their points down. If not, put in a horizontal position in the upper basket or in the knife basket. (Not all models have the knife basket).

• Use only specified products for dishwashers (detergent, salt, rinse aid).

• Types of salt that are not specified for dishwashers can cause damage to the water soft- ener. Safety instructions 29• Fill the appliance with salt before you start a washing programme. Remaining salt in the appliance can cause corrosion or make a hole in the bottom of the appliance.

• Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwasher cleaning agent, liquid detergent). This can cause damage to the appliance.

• Make sure that the spray arms can move freely before you start a washing programme.

• The appliance can release hot steam if you open the door while a washing programme operates. There is a risk of skin burns.

• Do not remove the dishes from the appliance until the washing programme is comple- ted. Care and cleaning

• Before you clean the appliance, deactivate it and disconnect the mains plug from the mains socket.

• Do not use flammable products or products that can cause corrosion.

• Do not use the appliance without the filters. Make sure that the installation of the filters is correct. An incorrect installation causes unsatisfactory washing results and damage to the appliance.

• Do not use spray water or steam to clean the appliance. Risk of electrical shock and damage to the appliance. Installation

• Make sure that the appliance is not damaged. Do not install or connect a damaged appli- ance, contact the supplier.

• Remove all packaging before you install and use the appliance.

• Only a qualified person must do the electrical connection, the plumbing and the installa- tion of the appliance. This to prevent the risks of structural damage or injury.

• Make sure that the mains plug is disconnected from the mains socket during installation.

• Do not drill into the sides of the appliance to prevent damage to hydraulic components and electrical components.

• Important!Obey the instructions in the template supplied with the appliance: – To install the appliance. – To assemble the door panel. – To connect to the water supply and drain.

• Make sure that the appliance is installed below and adjacent to safe structures. Frost precautions

• Do not install the appliance where the temperature is less than 0 °C.

• The manufacturer is not responsible for frost damage. Water connection

• Use new hoses to connect the appliance to the water supply. Do not use used hoses.

• Do not connect the appliance to new pipes or pipes not used for a long time. Let the water flow for some minutes, then connect the inlet hose. 30 Safety instructions• Make sure not to squash or cause damage to the water hoses when you install the appli- ance.

• Make sure that the water couplings are tight to prevent a water leakage.

• The first time you use the appliance, make sure that the hoses do not have water leaks.

• The water inlet hose has a safety valve and a double sheath with an inner mains cable. There is pressure in the water inlet hose only when the water flows. If there is a leak in the water inlet hose, the safety valve interrupts the flow of water. – Be careful when you connect the water inlet hose: – Do not put the water inlet hose or the safety valve in water. – If the water inlet hose or the safety valve are damaged, immediately disconnect the mains plug from the mains socket. – Contact the service centre to replace the water inlet hose with safety valve. WARNING! Dangerous voltage. Electrical connection

• The appliance must be earthed.

• Make sure that the electrical information on the rating plate agrees with the power sup- ply.

• Always use a correctly installed shockproof socket.

• Do not use multiple plugs and extension cables. There is a risk of fire.

• Do not replace or change the mains cable. Contact the service centre.

• Make sure not to squash or cause damage to the mains plug and cable behind the appli- ance.

• Make sure that there is access to the mains plug after the installation.

• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. Service centre

• Only a qualified person can repair or work on the appliance. Contact the service centre.

• Use only original spare parts. Safety instructions 31To discard the appliance

• To prevent the risk of injury or damage: – Disconnect the mains plug from the mains socket. – Cut off the mains cable and discard it. – Remove the door catch. This prevents children or pets to be closed in the appliance. There is a risk of suffocation. – Discard the appliance at the local waste disposal centre. WARNING! The dishwasher detergents are dangerous and can cause corrosion !

• If an accident occurs with these detergents, contact immediately a physician.

• If the detergent gets into the mouth, contact immediately a physician.

• If the detergent gets into the eyes, contact immediately a physician and clean the eyes with water.

• Keep dishwasher detergents in a safe area and out of children touch.

• Do not keep the appliance door open when there is detergent in the detergent dispenser.

• Fill the detergent dispenser only before you start a washing programme. PRODUCT DESCRIPTION

Upper spray arm CONTROL PANEL The controls are on the top on the control panel. To operate with the controls, keep the appliance door ajar.

Function buttons Indicators Salt indicator. It comes on when it is necessary to fill the salt container.

After you fill the container, the salt indicator can stay on for some hours. This does not have an unwanted effect on the operation of the appliance. Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispens- er.

Multitab indicator. It comes on when you activate the function.

1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a

washing programme operates. On/off button Press this button to activate or deactivate the appliance. Control panel 33Display The display shows:

• The electronic adjustment of the level of the water softener

• The activation and deactivation of the rinse aid dispenser (only with the multitab func- tion on)

• The time of the washing programme

• The remaining time to the end of the washing programme

• The end of a washing programme (the display shows a zero)

• The time of the delay start

• The activation and deactivation of the acoustic signals. Delay button Press this button again and again to delay the start of the washing programme from 1 to 19 hours. Programme buttons Press one of these buttons to set a washing programme. The related indicator comes on. Refer to 'Washing programmes'. Function buttons Use the function buttons for these operations:

• To adjust electronically the level of the water softener. Refer to 'Setting the water soft- ener'.

• To cancel the washing programme in progress or a delay start in progress. Refer to 'Set- ting and starting a washing programme'.

• To deactivate/activate the audible signals. Refer to 'Audible signals'. Setting mode The appliance must be in setting mode for these operations:

• To set and start a washing programme.

• To set and start a delay start.

• To adjust electronically the level of the water softener.

• To deactivate or activate the acoustic signals. Activate the appliance. The appliance is in setting mode when:

• All the programme indicators come on. 34 Control panelActivate the appliance. The appliance is not in setting mode when:

• Only one programme indicator comes on.

• The display shows the time of the washing programme or of the delay start. – It is necessary to cancel the programme or the delay start to go back to the setting mode. Refer to 'Select and start a washing programme'. Acoustic signals You can hear the acoustic signals in these conditions:

• The washing programme is completed.

• The level of the water softener is adjusted electronically.

• The appliance has a malfunction. Factory setting: on. Deactivating the acoustic signals

1. Activate the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold function button (B) and function button (C) at the same time until the

indicators of function buttons (A), (B) and (C) flash.

• The indicators of function buttons (A) and (B) go off.

• The indicator of function button (C) continues to flash.

• The display shows the setting of the acoustic signals. The acoustic signals are on. The acoustic signals are off.

6. Press function button (C) to change the setting

7. Deactivate the appliance to confirm.

To activate the acoustic signals again, do steps (1) through (7).

USE OF THE APPLIANCE

1. Be sure that the set level of the water softener agrees with the water hardness in your

area. If not, adjust the water softener.

2. Fill the salt container with dishwasher salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the appliance.

5. Set the correct washing programme for the type of load and soil.

6. Fill the detergent dispenser with the correct quantity of detergent.

The water softener removes minerals and salts from the water supply. These minerals and salts can cause damage to the appliance. Adjust the level of the water softener if this does not agree with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Water hardness Water hardness ad- justment German degrees (°dH) French degrees (TH°) mmol/l Clarke de- grees manually elec- troni- cally

2) Do not use salt at this level.

You must adjust the water softener manually and electronically. Manual adjustment Turn the water hardness dial to the position 1 or 2 (refer to the table). 36 Setting the water softenerElectronic adjustment

1. Activate the appliance. Make sure that the appliance is in setting mode.

2. Press and hold function buttons (B) and (C) at the same time until the indicators of

function buttons (A), (B) and (C) flash.

• The indicators of function buttons (B) and (C) go off.

• The indicator of function button (A) continues to flash.

• The acoustic signals sound.

• The display shows the setting of the water softener (example: and you hear five acoustic signals = level 5).

5. Press function button (A) again and again to change the setting.

6. Deactivate the appliance to confirm.

1. Turn the cap counterclockwise and open

2. Fill the salt container with 1 litre of water

(only for the first time you fill with salt).

3. Use the funnel to fill the salt container

4. Remove the salt around the opening of

5. Turn the cap clockwise to close the salt

container. It is correct that water comes out from the salt container when you fill it with salt. Use of dishwasher salt 37USE OF DETERGENT AND RINSE AID

Use of detergent To help the environment, do not use more than the correct quantity of detergent. Follow the detergent manufacturer recommendations on the detergent packaging. Do these steps to fill the detergent dispenser:

Press the release button

of the detergent dispenser.

Put the detergent in the dispenser

3. If the washing programme has a prewash phase, put a small quantity of detergent in

the prewash detergent compartment

If you use the detergent tablets, put the tablet in the detergent dispenser

5. Close the detergent dispenser. Press the lid until it locks into position.

Different brands of detergent dissolve in different times. Some detergent tablets do not have the best cleaning results during short washing programmes. Use long washing pro- grammes when you use the detergent tablets to fully remove the detergent. Use of rinse aid Rinse aid makes it possible to dry the dishes without streaks and stains. The rinse aid dispenser automatically adds rinse aid during the last rinsing phase. Do these steps to fill the rinse aid dispenser:

Press the release button

of the rinse aid dispenser.

with rinse aid. The mark 'max' shows the maximum level.

3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during

the washing programme.

4. Close the rinse aid dispenser. Press the lid until it locks into position.

38 Use of detergent and rinse aidAdjust the rinse aid dosage Factory set: position 4. You can set the rinse aid dosage between position 1 (lowest dosage) and position 6 (highest dosage). Turn the rinse aid selector

to increase or decrease the dosage. MULTITAB FUNCTION The multitab function is for combi detergent tablets. These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of tab- lets can contain other agents. Be sure that these tablets are applicable for the water hardness in your area (refer to the instructions on the packaging of the products). The multitab function deactivates the flow of rinse aid and salt. The multitab function deactivates the indicators of salt and rinse aid. The programme duration can increase if you use the multitab function. Activate or deactivate the multitab function before the start of a washing programme. You cannot activate or deactivate the function when a washing programme operates. To activate the multitab function

1. Activate the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold function buttons (D) and (E) at the same time until the multitab indica-

4. Release function buttons (D) and (E). The function is activated.

• When you activate the multitab function, it stays on until you deactivate it. To deactivate the multitab function and use separately detergent, salt and rinse aid

1. Activate the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold at the same time, function buttons (D) and (E) until the multitab indica-

4. Release function buttons (D) and (E). The function is deactivated.

5. Fill the salt container and the rinse aid dispenser.

6. Adjust the water hardness to the highest level.

7. Start a washing programme without dishes.

8. When the washing programme is completed, adjust the water softener to the water

hardness in your area.

39LOADING CUTLERY AND DISHES

• Do not put in the appliance items that can absorb water (sponges, household cloths).

• Remove the remaining food from the items.

• Make soft the remaining burned food on the items.

• Put hollow items (cups, glasses and pans) with the opening down.

• Make sure that water does not collect in containers or in bowls.

• Make sure that cutlery and dishes do not bond together.

• Make sure that the glasses do not touch other glasses.

• Put small items in the cutlery basket.

• Mix the spoons with other cutlery to prevent them to bond together.

• When you put the items in the baskets, make sure that the water can touch all surfaces.

• Put light items in the upper basket. Make sure that the items do not move.

• Water droplets can collect on plastic items and non-stick pans. Lower basket Put the saucepans, lids, plates, salad bowls and cutlery in the lower basket. Arrange the service dishes and large lids around the edge of the bas- ket. The cutlery basket Put the forks and spoons with the handles down. 40 Loading cutlery and dishesPut the knives with the handles up. Mix the spoons with other cutlery to prevent them to bond together. Use the cutlery grid. If the dimensions of the cut- lery prevent use of the cutlery grid, you can easily remove it. Upper basket The upper basket is for plates (maximum 24 cm in diameter), saucers, salad bowls, cups, glasses, pots and lids. Arrange the items to let water touch all surfaces. Prevent to put plates in the first three sectors in the front part of the basket. Make sure the plates tilt forward. Put the glasses with long stems in the cup racks with the stems up. For longer items, fold the cup racks up. Adjustment of the height of the upper basket You can put the upper basket in two positions to increase the load flexibility. Loading cutlery and dishes 41Maximum height of the dishes in: the upper basket the lower basket Higher position 20 cm 31 cm Lower position 24 cm 27 cm Do these steps to move the upper basket to the higher position:

1. Pull the basket out until it stops.

2. Carefully lift the two sides until the

mechanism is engaged and the basket is stable. Do these steps to move the upper basket to the lower position:

1. Pull the basket out until it stops.

2. Carefully lift up the two sides.

3. Hold the mechanism and let it fall back

down slowly. CAUTION!

• Do not lift or lower the basket on one side only.

• If the basket is in the upper position, do not put cups on the cup racks. WASHING PROGRAMMES Programme Type of soil Type of load Programme description

All Crockery, cutlery, pots and pans Prewash Wash 45 °C or 70 °C Rinses Dry Heavy soil Crockery, cutlery, pots and pans Prewash Wash 70 °C Rinses Dry

Fresh soil Crockery and cutlery Wash 60 °C Rinse

Normal soil Crockery and cutlery Prewash Wash 50 °C Rinses Dry 42 Washing programmesProgramme Type of soil Type of load Programme description Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance. Do not use detergent with this pro- gramme Rinse

1) The appliance senses the type of soil and the quantity of items in the baskets. It automatically adjusts the

temperature and quantity of the water, the energy consumption and the programme time.

2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.

3) This is the standard programme for test institutes. With this programme you have the most efficient use of

water and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information. Consumption values Programme

1) The display shows the programme time.

The water pressure and temperature, the variations of the mains supply and the quantity of dishes can change the consumption values.

SETTING AND STARTING A WASHING PROGRAMME

Starting the washing programme without delay start

1. Activate the appliance.

2. Make sure that the appliance is in setting mode.

3. Set the washing programme.

• The related programme indicator comes on.

• The programme time flashes in the display.

4. Close the appliance door, the washing programme starts automatically.

Starting the washing programme with delay start

1. Activate the appliance.

2. Make sure that the appliance is in setting mode.

3. Set the washing programme.

4. Press the delay button again and again until the display shows the time of the delay

start. Setting and starting a washing programme 43• The time of the delay flashes in the display.

• The delay indicator is on.

5. Close the appliance door, the countdown starts automatically.

• When the countdown is completed, the washing programme starts automatically. The opening of the appliance door interrupts the countdown. When you close the door, the countdown continues from the point of interruption. Cancelling the delay start If the appliance door is open, and the countdown has not started

1. Press the delay button again and again until the display shows the time of the washing

• The time flashes in the display.

2. Close the appliance door, the washing programme starts automatically.

If the appliance door is closed, and the countdown operates

1. Open the appliance door.

2. Press the delay button again and again until the display shows the time of the washing

3. Close the appliance door, the washing programme starts automatically.

Interruption of a washing programme

• Open the appliance door. – The washing programme stops.

• Close the appliance door. – The washing programme continues from the point of interruption. Cancelling the washing programme If the washing programme has not started, you can change the selection. To change the selection while the washing programme operates, it is necessary to cancel the programme.

1. Press and hold at the same time, function buttons (B) and (C) until all the programme

button indicators come on.

2. Release function buttons (B) and (C). The set programme is cancelled.

Make sure that there is detergent in the detergent dispenser before you start a new wash- ing programme. End of the washing programme When the washing programme is completed, an intermittent acoustic signal sounds.

1. Open the appliance door, the display shows a zero.

2. Deactivate the appliance.

For better drying results, keep the appliance door ajar for some minutes. 44 Setting and starting a washing programme• If you do not switch off the appliance, after three minutes from the end of the washing programme: – all indicator lights go off, – the display shows one horizontal bar, This helps to decrease energy consumption. Press one of the buttons (not the on/off button), the display and the indicator lights come on again. Remove the items from the baskets

• Let the dishes become cold before you remove them from the appliance. Hot dishes can be easily damaged.

• First remove the items from the lower basket, then from the upper basket.

• There can be water on the sides and on the door of the appliance. Stainless steel be- comes cool more quickly than the dishes.

To remove and clean the filters Dirty filters decrease the washing results. Make a check at intervals and if necessary, clean them. The appliance has three filters:

Care and cleaning 451. To unlock the filters (A) and (B), turn the handle on the microfilter (B) approxi- mately 1/4 counterclockwise and remove.

2. Hold the coarse filter (A) by the handle

and remove it from the microfilter (B).

3. Remove the flat filter (C) from the bottom

4. Fully clean the filters with water.

5. Put the flat filter (C) to its initial position.

Make sure that it assembles correctly in the two guides (D).

6. Put the coarse filter (A) in the microfilter

(B) and push the filters together.

7. Put the filters (A) and (B) in position. Turn

the handle on the microfilter (B) clockwise until it locks in position. To clean the spray arms Do not remove the spray arms. If the holes in the spray arms become clogged, remove remaining parts of soil with a thin pointed object. To clean the external surfaces Clean the external surfaces of the appliance and control panel with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads or solvents (acetone).

The start of the appliance does not occur or it stops during operation. First try to find a solution to the problem (refer to the table). If not, contact the service centre. With some malfunctions, the display shows an alarm code:

- The appliance does not fill with water

- The appliance does not drain the water

- The anti-flood device is on. WARNING! Deactivate the appliance before you do the checks.

46 What to do if…Malfunction Possible cause Possible solution The appliance does not fill with water. The water tap is blocked or there is limescale on it. Clean the water tap. The water pressure is too low. Contact your local water au- thority. The water tap is closed. Open the water tap. The filter in the water inlet hose is blocked. Clean the filter. The connection of the water inlet hose is not correct. Make sure that the connection is correct. The water inlet hose is dam- aged. Make sure that the water inlet hose has no damages. The appliance does not drain the water. There is a blockage in the sink spigot. Clean the sink spigot. The connection of the water drain hose is not correct. Make sure that the connection is correct. The water drain hose is dam- aged. Make sure that the water drain hose has no damages. The anti-flood device is on. Close the water tap and con- tact the service centre. The start of the washing pro- gramme does not occur. The appliance door is open. Close the appliance door. The mains plug is not connec- ted in the mains socket. Connect the mains plug. The fuse in the fuse box is damaged. Replace the fuse. The delay start is set. • Cancel the delay start.

• When the countdown is completed, the washing pro- gramme starts automatical- ly. After the check, activate the appliance. The programme continues from the point of inter- ruption. If the malfunction occurs again, contact the service centre. If the display shows other alarm codes, contact the service centre. The necessary information for the service centre is on the rating plate. Record this information: – Model (MOD.) ........................................................ – Product number (PNC) .......................................... – Serial number (S.N.) .............................................. What to do if… 47The washing results and drying results are not satisfactory Problem Possible cause Possible solution The dishes are not clean. The washing programme was not applicable for the type of load and soil. Make sure that the washing programme is applicable for the type of load and soil. You did not put the items cor- rectly in the baskets, water did not touch all surfaces. Put the items correctly in the baskets. The spray arms could not turn freely. Incorrect position of the items in the baskets. Make sure that an incorrect po- sition of the items do not cause the blockage of the spray arms. The filters are dirty or not as- sembled and installed correctly. Make sure that the filters are clean and correctly assembled and installed. The quantity of detergent was not sufficient or missing. Make sure that the quantity of detergent is sufficient. Limescale particles on the dishes. The salt container is empty. Fill the salt container with dish- washer salt. Incorrect level of the water softener adjustment. Adjust the water softener with the correct level. The salt container cap is not closed correctly. Make sure that the salt con- tainer cap is closed correctly. There are streaks, whitish stains, or a bluish layer on glasses and dishes. The rinse aid quantity is too high. Decrease the rinse aid quantity. Dry water drop stains on glasses and dishes. The rinse aid quantity is too low. Increase the rinse aid quantity. The detergent can be the cause. Use a different brand of deter- gent. The dishes are wet. The washing programme was without a drying phase or with a decreased drying phase. For better drying results, keep the door ajar for some minutes. The dishes are wet and matt. The rinse aid dispenser is emp- ty. Fill the rinse aid dispenser with rinse aid. The multitab function is on (this function automatically deactivates the rinse aid dis- penser). Activate the rinse aid dispenser. Activating the rinse aid dispenser

1. Activate the appliance.

2. Make sure that the appliance is in setting mode.

48 What to do if…3. Press and hold function buttons (B) and (C) at the same time until the indicators of function buttons (A), (B) and (C) flash.

• The indicators of function buttons (A) and (C) go off

• The indicator of function button (B) continues to flash

• The display shows the setting of the rinse aid dispenser. Rinse aid dispenser is off. Rinse aid dispenser is on.

6. Press function button (B) to change the setting.

7. Deactivate the appliance to confirm.

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

The rating plate on the inner edge of the appliance door shows the electrical connection data. If the hot water comes from alternative sources of energy, (e.g. solar panels, photovoltaic panels and aeolian), use a hot water supply to decrease energy consumption. ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office. The packaging materials are environmentally friendly and can be recycled. The plastic com- ponents are identified by markings, e.g. >PE<, >PS<, etc. Discard the packaging materials in the applicable container at the community waste disposal facilities. Technical data 49WARNING! To discard the appliance, follow the procedure:

• Pull the mains plug out of the socket.

• Cut off the mains cable and mains plug and discard them.

FONCTION "TOUT EN 1"