Küppersbusch FK2505.0i - Fridge

FK2505.0i - Fridge Küppersbusch - Free user manual and instructions

Find the device manual for free FK2505.0i Küppersbusch in PDF.

📄 64 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Küppersbusch FK2505.0i - page 17
View the manual : Français FR Deutsch DE English EN Nederlands NL
Pick your language and provide your email: we'll send you a specifically translated version.
Product typeBuilt-in refrigerator-freezer
BrandKüppersbusch
ModelFK2505.0i
Energy classA++
Annual consumption148 kWh
Total volume117 L
Fridge volume103 L
Freezer volume (4 stars)14 L
Freezing capacity2 kg/24 h
Autonomy in case of power failure12 h
Built-in dimensions (H x W x D)873 x 556 x 550 mm
Voltage / Frequency230-240 V / 50 Hz
Climate classSN-N-ST-T (10 °C to 43 °C)
Noise level36 dB(A)
Integrable applianceYes
Fridge defrostAutomatic
Freezer defrostManual
LightingLED
FastFreeze functionYes
Number of freezer stars4
RefrigerantIsobutane (R600a)
MaintenanceClean with warm water and mild detergent; do not use abrasives
SafetyUse by children >8 years; do not obstruct ventilation openings; do not damage the refrigerant circuit
RepairabilityOriginal parts; contact authorized after-sales service

Frequently Asked Questions - FK2505.0i Küppersbusch

How to set the refrigerator temperature?
Press the thermostat button until the LED indicator of the desired temperature lights up. The temperature can be set from +2°C (coldest setting) to +8°C (warmest setting). An intermediate setting is generally recommended.
How to activate the FastFreeze function?
Press the FastFreeze button; the corresponding indicator lights up. The function accelerates freezing of fresh food and automatically deactivates after 28 hours. You can also deactivate it manually by pressing the button again.
How to clean the interior of the appliance?
Unplug the appliance. Clean the interior and accessories with warm water and a mild detergent. Never use abrasive products, chlorine, or oil. Rinse and dry thoroughly.
How to defrost the freezer?
Set the thermostat to the coldest position 12 hours before. Remove the food and wrap it in newspaper. Turn off the appliance and leave the door open. To speed up, place a container of hot water inside the compartment. Remove ice as it melts. Once done, dry the interior and restart. Replace food after 3 hours.
What to do if the appliance does not cool?
Check that the appliance is switched on, the plug is properly inserted, and the socket is working. Ensure the temperature is not set too high. If the problem persists, refer to the Troubleshooting chapter or contact authorized after-sales service.
How to change the LED lighting?
The LED lighting is long-lasting and can only be replaced by an authorized technician. Contact after-sales service if the lighting no longer works.
Why is there water in the refrigerator?
The defrost water drain hole may be blocked. Clean it. Also check that food is not blocking the flow against the back plate.
What is the maximum freezing capacity per 24 hours?
The freezing capacity is 2 kg per 24 hours. Activate the FastFreeze function at least 24 hours before introducing fresh food.
What noises are normal during operation?
Normal noises include: a slight gurgling (refrigerant liquid), a humming from the compressor, a sudden cracking (thermal expansion), and a clicking from the thermostat. These noises are harmless.
How to save energy with this appliance?
Avoid opening the door too often and only leave it open as long as necessary. Allow hot food to cool before placing it. Ensure the door seals are clean and in good condition. Defrost the freezer regularly when the frost layer exceeds 3-5 mm.

User questions about FK2505.0i Küppersbusch

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Fridge in PDF format for free! Find your manual FK2505.0i - Küppersbusch and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FK2505.0i by Küppersbusch.

USER MANUAL FK2505.0i Küppersbusch

Please read the users and installation instructions carefully before installation of the appliance and before starting to use it.

natural_image Technical line drawing of a mechanical assembly with a central upward arrow (no text or symbols)
natural_image Pure technical line drawing of a structural component with no text, numbers, or symbols

Technical diagram showing two mechanical assembly steps with labeled components and directional arrows indicating motion or movement.

natural_image Diagram showing a hand holding a tool inside a circular device with rotational arrows, no text or symbols present.

Safety information 17 Safety instructions 18 Installation 20 Operation 21 Daily use 22

Hints and tips 23 Care and cleaning 24 Troubleshooting 26 Technical data 29

Subject to change without notice.

⚠ SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

Children and vulnerable people safety

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
  • This appliance may be used by children between 3 and 8 years of age and persons with very extensive and complex disabilities, if they have been properly instructed.
  • Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
  • Do not let children play with the appliance.
  • Children shall not carry out cleaning and user maintenance of the appliance without supervision.
  • Keep all packaging away from children and dispose of it appropriately.

General Safety

- This appliance is intended to be used in household and similar applications such as:

- Farm houses; staff kitchen areas in shops, offices and other working environments - By clients in hotels, motels, bed and breakfast and other residential type environments

- WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

- WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

- WARNING: Do not damage the refrigerant circuit.

- WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

- Do not use water spray and steam to clean the appliance.

- Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.

- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

- If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.

SAFETY INSTRUCTIONS

Installation

Küppersbusch FK2505.0i - Installation - 1

WARNING! Only a qualified person must install this appliance.

  • Remove all the packaging.
  • Do not install or use a damaged appliance.
  • Do not use the appliance before installing it in the built-in structure due to safety manner.
  • Follow the installation instructions supplied with the appliance.
    • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.

  • Make sure the air can circulate around the appliance.

  • At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
  • Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.
  • Do not install the appliance close to radiators or cookers, ovens or hobs.
  • Do not expose the appliance to the rain.
  • Do not install the appliance where there is direct sunlight.
  • Do not install this appliance in areas that are too humid or too cold.

- When you move the appliance, lift it by the front edge to avoid scratching the floor.

Electrical connection

Küppersbusch FK2505.0i - Electrical connection - 1

WARNING! Risk of fire and electric shock.

Küppersbusch FK2505.0i - Electrical connection - 2

WARNING! When positioning the appliance, ensure the supply cord is not trapped or damaged.

Küppersbusch FK2505.0i - Electrical connection - 3

WARNING! Do not use multi- plug adapters and extension cables.

• The appliance must be earthed.
- Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Always use a correctly installed shockproof socket.
- Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service Centre or an electrician to change the electrical components.
- The mains cable must stay below the level of the mains plug.
- Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
- Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

Use

Küppersbusch FK2505.0i - Use - 1

WARNING! Risk of injury, burns, electric shock or fire.

Küppersbusch FK2505.0i - Use - 2

The appliance contains flammable gas, isobutane (R600a), a natural gas with a high level of environmental compatibility. Be careful not to cause damage to the refrigerant circuit containing isobutane.

  • Do not change the specification of this appliance.
  • Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer.
  • If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
  • Do not let hot items to touch the plastic parts of the appliance.
  • Do not put soft drinks in the freezer compartment. This will create pressure on the drink container.
  • Do not store flammable gas and liquid in the appliance.
  • Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
  • Do not touch the compressor or the condenser. They are hot.
  • Do not remove or touch items from the freezer compartment if your hands are wet or damp.
  • Do not freeze again food that has been thawed.
  • Follow the storage instructions on the packaging of frozen food.
  • Wrap the food in any food contact material before putting it in the freezer compartment.

Internal lighting

Küppersbusch FK2505.0i - Internal lighting - 1

WARNING! Risk of electric shock.

- The type of lamp used for this appliance is for household appliances only. Do not use it for house lighting.

Care and cleaning

Küppersbusch FK2505.0i - Care and cleaning - 1

WARNING! Risk of injury or damage to the appliance.

  • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
  • This appliance contains hydrocarbons in the cooling unit. Only a qualified

person must do the maintenance and the recharging of the unit.

- Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.

Service

• To repair the appliance contact the Authorised Service Centre.
- Use original spare parts only.

Disposal

Küppersbusch FK2505.0i - Disposal - 1

WARNING! Risk of injury or suffocation.

INSTALLATION

Küppersbusch FK2505.0i - INSTALLATION - 1

WARNING! Refer to Safety chapters.

Location

Küppersbusch FK2505.0i - Location - 1

Refer to the assembly instructions for the installation.

To ensure best performance, install the appliance well away from sources of heat such as radiators, boilers, direct sunlight etc. Make sure that air can circulate freely around the back of the cabinet.

Positioning

Install the appliance in a dry, well ventilated indoors where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance.

Climate classAmbient temperature
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
  • Disconnect the appliance from the mains supply.
  • Cut off the mains cable and discard it.
  • Remove the door to prevent children and pets to be closed inside of the appliance.
  • The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.
  • The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
  • Do not cause damage to the part of the cooling unit that is near the heat exchanger.

Küppersbusch FK2505.0i - Positioning - 1

Some functional problems might occur for some types of models when operating outside of that range. The correct operation can only be guaranteed within the specified temperature range. If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre.

Electrical connection

  • Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.
  • The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.
  • The manufacturer declines all responsibility if the above safety precautions are not observed.

• This appliance complies with the E.E.C. Directives.

Ventilation requirements

The airflow behind the appliance must be sufficient.

5 cm min. 200 cm² min. 200 cm²

OPERATION

Control panel

Küppersbusch FK2505.0i - Control panel - 1

  1. Insert the plug into the wall socket.
  2. Touch the temperature regulator button if all LED indicators are off.

Switching off

Keep touching the temperature regulator button for 3 seconds.

All indicators light off.

Küppersbusch FK2505.0i - Switching off - 1

CAUTION! Refer to the assembly instructions for the installation.

1 Temperature indicator LED
2 FastFreeze indicator
3 FastFreeze button
4 Temperature regulator ON/OFF button

Temperature regulation

To operate the appliance, touch the temperature regulator until the LED corresponding to the required temperature lights up. Selection is progressive, varying from 2°C to 8°C.

Küppersbusch FK2505.0i - Temperature regulation - 1

Coldest setting: +2°C.

Warmest setting: +8°C.

A medium setting is generally the most suitable.

Choose the setting keeping in mind that the temperature inside the appliance depends on:

  • room temperature
    • frequency of opening the door
    • quantity of food stored
  • appliance location.

  • Touch temperature regulator. Current temperature indicator blinks. Any time you touch the temperature regulator, the setting moves by one position. The corresponding LED blinks for a while.

  • Touch the temperature regulator until the required temperature is selected.

DAILY USE

Küppersbusch FK2505.0i - DAILY USE - 1

WARNING! Refer to Safety chapters.

Freezing fresh food

The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time.

To freeze fresh food activate the FastFreeze function at least 24 hours before placing the food to be frozen in the freezer compartment.

The maximum amount of food that can be frozen in 24 hours is specified on the rating plate, a label located on the inside of the appliance.

The freezing process lasts 24 hours: during this period do not add other food to be frozen.

When the freezing process is completed, return to the required temperature (see "FastFreeze Function").

Storage of frozen food

When first starting-up or after a period out of use, before putting the products in the

FastFreeze function

The FastFreeze function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from undesirable warming.

To activate this function press the FastFreeze button.

The FastFreeze indicator appears. This function stops automatically after 28 hours.

You can deactivate the FastFreeze function before its automatic end by pressing the FastFreeze button again. The FastFreeze indicator will turn off.

Küppersbusch FK2505.0i - FastFreeze function - 1

The function switches off by selecting a different set temperature.

compartment let the appliance run at least 2 hours with the FastFreeze function turned on.

Küppersbusch FK2505.0i - FastFreeze function - 2

In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer that the value shown in the technical data chart under "Rising time", the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooling).

Thawing

Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compartment or at room temperature, depending on the time available for this operation.

Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking will take longer.

Positioning the door shelves

To permit storage of food packages of various sizes, the door shelves can be placed at different heights.

  1. Gradually pull the shelf up until it comes free.
  2. Reposition as required.

Küppersbusch FK2505.0i - Positioning the door shelves - 1

natural_image Technical line drawing of a mechanical assembly with a central upward arrow (no text or symbols)

Movable shelves

The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.

Küppersbusch FK2505.0i - Movable shelves - 1

natural_image Pure technical line drawing of a structural component with no text, numbers, or symbols

HINTS AND TIPS

Normal operating sounds

The following sounds are normal during operation:

Küppersbusch FK2505.0i - Normal operating sounds - 1

Do not move the glass shelf above the vegetable drawer to ensure correct air circulation.

Using a foldable shelf

This appliance is equipped with a shelf consisting of two parts. The front half of the shelf can be placed under the second half to make better use of space.

To fold the shelf:

  1. Take out the front half gently.
  2. Slide it onto the lower rail and under the second half.

Technical diagram showing two mechanical assembly steps with labeled components and directional arrows indicating motion or movement.

Technical diagram showing two mechanical assembly steps with labeled components and directional arrows indicating motion or movement.

- A faint gurgling and bubbling sound from coils sound when refrigerant is pumped.

  • A whirring and pulsating sound from the compressor when refrigerant is pumped.
  • A sudden cracking noise from inside appliance caused by thermic dilatation (a natural and not dangerous physical phenomenon).
  • A faint click noise from the temperature regulator when the compressor switches on or off.

Hints for energy saving

- Do not open the door frequently or leave it open longer than absolutely necessary.

Hints for fresh food refrigeration

  • Do not store warm food or evaporating liquids in the refrigerator.
  • Cover or wrap the food, particularly if it has a strong flavour.
  • Position food so that air can circulate freely around it.

Hints for refrigeration

Useful hints:

  • Meat (all types): wrap in a suitable packaging and place it on the glass shelf above the vegetable drawer. Store meat for at most 1-2 days.
  • Cooked foods, cold dishes: cover and place on any shelf.
  • Fruit and vegetables: clean thoroughly and place in a special drawer. Bananas, potatoes, onions and garlic must not be kept in the refrigerator if not packed.
  • Butter and cheese: place in a special airtight container or wrap in an

CARE AND CLEANING

Küppersbusch FK2505.0i - CARE AND CLEANING - 1

WARNING! Refer to Safety chapters.

aluminium foil or a polythene bag to exclude as much air as possible.

- Bottles: close with a cap and place on the door bottle shelf, or (if available) on the bottle rack.

Hints for freezing

  • Freeze only top quality, fresh and thoroughly cleaned food products.
  • For more efficient freezing and thawing divide food into small portions.
  • Wrap the food in aluminium foil or polythene. Make sure that the packages are airtight.
  • To avoid increase in temperature of already frozen food, do not place fresh unfrozen food directly next to it.
  • Lean foods store better and longer than fatty ones. Salt reduces the storage life of food.
  • Do not eat ice cubes, water ices or ice lollies immediately after taking them out of the freezer. Risk of frostbites.
  • It is advisable to show the freezing date on each individual pack to enable you to keep tab of the storage time.

Hints for storage of frozen food

  • Make sure that the commercially frozen food products were adequately stored by the retailer.
  • Make sure that frozen foodstuffs are transferred from the food store to the freezer in the shortest possible time.
  • Once defrosted, food deteriorates rapidly and cannot be refrozen.
  • Do not exceed the storage period indicated by the food manufacturer.

General warnings

Küppersbusch FK2505.0i - General warnings - 1

CAUTION! Unplug the appliance before carrying out any maintenance operation.

Küppersbusch FK2505.0i - General warnings - 2

This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians.

Küppersbusch FK2505.0i - General warnings - 3

The accessories and parts of the appliance are not suitable for washing in a dishwasher.

Cleaning the interior

Before using the appliance for the first time, the interior and all internal accessories should be washed with lukewarm water and some neutral soap to remove the typical smell of a brand-new product, then dried thoroughly.

Küppersbusch FK2505.0i - Cleaning the interior - 1

CAUTION! Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish.

Periodic cleaning

Küppersbusch FK2505.0i - Periodic cleaning - 1

CAUTION! Do not pull, move or damage any pipes and/or cables inside the appliance.

Küppersbusch FK2505.0i - Periodic cleaning - 2

CAUTION! Do not damage the cooling system.

The equipment has to be cleaned regularly:

  1. Clean the inside and accessories with lukewarm water and some neutral soap.

  2. Regularly check the door seals and wipe them clean to ensure they are clean and free from debris.

  3. Rinse and dry thoroughly.

  4. If accessible, clean the condenser and the compressor at the back of the appliance with a brush.

This will improve the performance of the appliance and save electricity consumption.

Defrosting of the refrigerator

Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates.

It is important to periodically clean the defrost water drain hole in the middle of the refrigerator compartment channel to prevent the water overflowing and dripping onto the food inside.

Küppersbusch FK2505.0i - Defrosting of the refrigerator - 1

natural_image Illustration of a hand holding a tool inside a circular frame with rotational arrows, no text or symbols present.

Defrosting of the freezer

Küppersbusch FK2505.0i - Defrosting of the freezer - 1

CAUTION! Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. A temperature rise of the frozen food packs, during defrosting, may shorten their safe storage life.

Küppersbusch FK2505.0i - Defrosting of the freezer - 2

About 12 hours prior to defrosting, set a lower temperature, in order to build up sufficient chill reserve for the interruption in operation.

A certain amount of frost will always form on the freezer shelves and around the top compartment.

Defrost the freezer when the frost layer reaches a thickness of about 3-5 mm.

  1. Switch off the appliance, or pull out electrical plug from the wall socket.
  2. Remove any stored food, wrap it in several layers of newspaper and put it in a cool place.

Küppersbusch FK2505.0i - Defrosting of the freezer - 3

WARNING! Do not touch frozen goods with wet hands. Hands can freeze to the goods.

  1. Leave the door open.

In order to speed up the defrosting process, place a pot of warm water in the freezer compartment. In addition, remove pieces of ice that break away before defrosting is complete.

  1. When defrosting is completed, dry the interior thoroughly.
  2. Switch on the appliance.

After three hours reload the previously removed food into the freezer compartment.

TROUBLESHOOTING

Periods of non-operation

When the appliance is not in use for long periods, take the following precautions:

  1. Disconnect the appliance from electricity supply.
  2. Remove all food.
  3. Defrost the appliance (if necessary).
  4. Clean the appliance and all accessories.
  5. Leave the door/doors open to prevent unpleasant smells.

Küppersbusch FK2505.0i - Periods of non-operation - 1

CAUTION! If you want to keep the appliance switched on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.

Küppersbusch FK2505.0i - Periods of non-operation - 2

WARNING! Refer to Safety chapters.

What to do if...

Problem Possible cause Solution
The appliance does not operate.The appliance is switched off.Switch on the appliance.
The mains plug is not connected to the mains socket correctly.Connected to the mains socket correctly.Connect the mains plug to the mains socket correctly.
There is no voltage in the mains socket.mains socket.Connect a different electrical appliance to the mains socket. Contact a qualified electrician.
The appliance is noisy. The appliance is not supported properly.Check if the appliance stands stable.
The lamp does not work. The lamp is in stand-by. Close and open the door.
Problem Possible cause Solution
The lamp is defective. Contact the nearest Authorized Service Centre.
The compressor operates continually.Temperature is set incorrectly.Refer to "Operation" chapter.
Many food products to befrozen were put in at the same time.Wait a few hours and then check the temperature again.
The room temperature is too high.high.Refer to climate class chart on the rating plate.
Food products placed in the appliance were too warm.High.Allow food products to cool to room temperature before storing.
The FastFreeze function is switched on.Refer to "FastFreeze function".
There is too much frost and ice.The door is not closed correctly or the gasket is deformed/dirty.Refer to "Closing the door".
The water drainage plug is not correctly positioned.Position the water drainage plug in the correct way.
Food products are not wrapped properly.Wrap the food products better.
Temperature is set incorrectly.Refer to "Operation" chapter.
The compressor does not start immediately after pressing the FastFreeze, or after changing the temperature.This is normal, no error has occurred.The compressor starts after a period of time.
Water flows on the rear plate of the refrigerator.During the automatic defrosting process, frost melts on the rear plate.This is correct.
Water flows into the refrigerator.The water outlet is clogged. Clean the water outlet.
Food products prevent that water flows into the water collector.Make sure that food products do not touch the rear plate.
Problem Possible cause Solution
Water flows on the floor. The melting water outlet is not connected to the evaporative tray above the compressor.Attach the melting water outlet to the evaporative tray.
Temperature cannot be set. The FastFreeze function is switched on.Switch off FastFreeze manually, or wait until the function resets automatically to set the temperature. Refer to "FastFreeze function"
The temperature in the appliance is too low/too high.The temperature regulator is not set correctly.Set a higher/lower temperature.
The door is not closed correctly.Refer to "Closing the door".
The food products' temperature is too high.Let the food products temperature decrease to room temperature before storage.
Many food products are stored at the same time.Store less food products at the same time.
The thickness of the frost is greater than 4-5 mm.Defrost the appliance.
The door has been opened often.Open the door only if necessary.
The FastFreeze function is switched on.Refer to "FastFreeze function".
There is too much condensed water on the rear wall of the refrigerator.Door was opened too frequently.Open the door only when necessary.
Door was not closed completely.Make sure the door is closed completely.
Stored food was not wrapped.Wrap food in suitable packaging before storing it in the appliance.
Door does not open easily. You attempted to re-open the door immediately after closing.Wait a few seconds between closing and re-opening of the door.

Küppersbusch FK2505.0i - Periods of non-operation - 3

If the advice does not lead to the desired result, call the nearest Authorized Service Centre.

Replacing the lamp

The appliance is equipped with a longlife LED interior light.

Only service is allowed to replace the lighting device. Contact your Authorised Service Centre.

Closing the door

  1. Clean the door gaskets.

TECHNICAL DATA

  1. If necessary, adjust the door. Refer to assembly instructions.
  2. If necessary, replace the defective door gaskets. Contact the Authorised Service Centre.

Product information sheet

Trade Mark Küppersbusch
Model FK2505.0iPNC933020065
Category 7. Refrigerator-freezer
Energy efficiency class A++
Energy consumption in kWh per year, based on standard test results for 24 hours. The actual energy consumption will depend on how the appliance is used and where it is located148
Storage volume in litres, Fridge 103
Storage volume in litres, Star 14
Storage volume in litres, Cellar zone -
Storage volume in litres, Wine -
Storage volume in litres, Total 117
Storage volume in litres, Freezer -
Storage volume in litres, Chiller -
Storage volume in litres, Other compartments -
Star rating of freezer compartment with highest storage volume (l)****
Design temperature of other compartments > 14 °C (°C), if any-
Frost free (Y/N), Fridge No
Frost free (Y/N), Freezer No
Power cut safe in h 12
Freezing capacity in kg/24h 2
Climate classSN-N-ST-T
Lowest ambient temperature at which this appliance is intended to be used, in °C10
Highest ambient temperature at which this appliance is intended to be used, in °C43
Acoustical noise emissions dB(A) re1 pW 36
Built in appliance Y/N Yes
This appliance is intended to be used exclusively for the storage of wine Y/NNo

Additional technical data

Dimensions of the recess
Height 873 mm
Width 556 mm
Depth 550 mm
Voltage 230 - 240 V
Frequency 50 Hz

The technical information is situated in the rating plate, on the external or internal side of the appliance and on the energy label.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do

not dispose of appliances marked with the symbol ☒ with the household waste. Return the product to your local recycling facility or contact your municipal office.

TABLE DES MATIÈRES

natural_image Technical line drawing of a mechanical assembly with a central upward arrow (no text or symbols)

Clayettes amovibles

natural_image Pure technical line drawing of a structural component with no text or symbols

Technical diagram showing two mechanical assembly steps with labeled components and directional arrows indicating motion or movement.

natural_image Diagram showing a hand holding a tool inside a circular device with rotational arrows, no text or symbols present.
natural_image Technical line drawing of a mechanical assembly with a central upward arrow (no text or symbols)
natural_image Pure technical line drawing of a structural component with no text, numbers, or symbols

Technical diagram showing two mechanical assembly steps with labeled components and directional arrows indicating motion or movement.

TIPPS UND HINWEISE

natural_image Diagram showing a hand holding a tool inside a circular frame with rotational arrows, no text or symbols present.
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Küppersbusch

Model : FK2505.0i

Category : Fridge