Icebreaker - Ice Maker OneConcept - Free user manual and instructions

USER MANUAL Icebreaker OneConcept

Dear Customer, Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints to avoid damages. Any failure caused by ignoring the items and cautions mentioned in the instruction manual is not covered by our warranty and any liability. Scan the QR code to get access to the latest user mannual and other information about the product CONTENT Safety Instructions 10 Product Description 11 Use and Operation 11 Cleaning and Care 11 Disposal Considerations 12 Manufacturer & Importer (UK) 12 TECHNICAL DATA Item number 10028440, 10028938 Power supply 220-240 V ~ 50/60 Hz10

• Read all the safety and operating instructions carefully and retain them for future refe- rence. To protect against risk of electrical hazards, do not Immerse the Wonder chopper Ice Crusher in water or other liquids.

• Unplug from outlet when not in use, before assembling or disassembling, and before cleaning. Avoid contacting moving parts. Never place ngers or other utensils into feed or discharge areas.

• If the plug does not t, contact a qualied electrician. Do not modify the plug in any way.

• Do not operate the unit with a damaged cord or plug, or after the unit malfunctions, is dropped or damaged cord or plug, or after the unit malfunctions, is dropped or damaged in any manner. Return it to the nearest authorized service facility.

• When the Ice Crusher is used by or near children, close supervision is necessary. 8. Do no use outdoors. Do not let cord hang over edge of table or counter, or touch hot surfaces.

• Check feeder chute for presence of foreign objects before using. Use only attachments that are included in the packaging of the Wonder chopper Ice Crusher. The use of other attachments may cause re. Electric shock or injury.11

1. Place the ice crusher (clear bowl) packed with the unit under the bottom

opening of the ice crusher. Plug the unit in and set the on/off power switch to the on position. Note: ice crusher will not operate unless ice container is secured into position.

2. To begin crushing ice, drop cubes into feeder chute opening on top of unit.

Blades of crus- her unit are self feeding. Do not attempt to push cubes into blades with hand or instrument.

3. If a large cube should become lodged in the crushing unit so that blades

cannot reach it, set power switch to the off position and unplug unit from outlet. Then pour warm water down through feeder chute until lodged cube is melted or falls free. Plug unit back into outlet, set the power switch to the on position, and resume feeding cubes through the feeder.

• Pour hot water through top feeder chute to rinse out after each use.

• Wipe outside of ice crusher with a clean damp cloth.12

DISPOSAL CONSIDERATIONS If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service. MANUFACTURER & IMPORTER (UK) Manufacturer: Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany. Importer for Great Britain: Berlin Brands Group UK Ltd PO Box 1145 Oxford, OX1 9UW United Kingdom13