LP 2500 - Fan lamp Orbegozo - Free user manual and instructions

Brand	Orbegozo
Model	LP 2500
Product type	Fan light
Power supply	USB 5V (cable included), built-in rechargeable battery
Light source	LED
Lighting modes	3 modes: natural light, cool white, warm white
Dimmer	Yes, long press on light button
Fan function	Yes, on/off by dedicated button
Main switch	Yes, ON/OFF position
Charge indicator	Light indicator: on when charging, off when charged
Recommended use	Indoor, dry environment, temperature 0-40°C
Child safety	Do not leave packaging within reach, supervision required for children under 8 years
Maintenance	Unplug before cleaning, do not immerse, do not use abrasive products
Repairability	Do not open or repair yourself, contact a professional
Standards	Compliant with Low Voltage Directive 2014/35/EU and EMC 2014/30/EU
Material	Plastic and electronic components
Weight	Approximately 500 g (estimated)
Dimensions	Height approximately 25 cm, base diameter approximately 15 cm (estimated)
Color	White (unspecified, estimated)

Frequently Asked Questions - LP 2500 Orbegozo

How to charge the LP 2500 lamp?

Plug the included USB cable into a mains power outlet (adapter not included). The charge indicator lights up during charging and turns off when the battery is full. The lamp can be used while charging.

How many lighting modes does the lamp offer?

It offers three modes: natural light, cool white, and warm white. Press the light button to switch between modes.

How to adjust the light intensity?

Press and hold the light button to adjust the intensity. Release when the desired level is reached.

Can I use the lamp while it is charging?

Yes, the lamp operates normally when connected to the charger. This does not damage the battery.

Is the lamp safe for children?

The device can be used by children over 8 years of age under supervision. Do not let children play with the device. Keep packaging out of reach.

What to do if the lamp does not turn on?

Check that the main switch is in the ON position and that the battery is charged. If the problem persists, contact Orbegozo after-sales service.

Can I replace the battery myself?

No, the device must not be opened. Any repairs must be carried out by a qualified professional to avoid any risk.

How to clean the lamp and fan?

Unplug the device before cleaning. Use a slightly damp soft cloth. Never immerse the lamp in water and do not use chemical products.

Is the lamp waterproof?

No, it is designed for indoor use only in a dry environment. Do not expose it to water or humidity.

What is the warranty of the Orbegozo LP 2500?

The legal guarantee of conformity applies. For more information, visit www.orbegozo.com or contact your retailer.

USER MANUAL LP 2500 Orbegozo

Modern blue office lamp with a cylindrical base and vertical stand, no visible text or symbols on the device itself.

LP 2500

Sonifer,S.A.

Web: www.orbegozo.com

Made in P.R.C.

Read this manual carefully before running this appliance and save it for reference in order to obtain the best results and ensure safe use.

Security instructions

1. Only for indoor using and dry environment 0-40°C.
2. Do not open or repair this product by yourself.
3. Do not cover during operation.

4. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
   Children must never play with the appliance. Cleaning and user maintenance must never be carried out by children without supervision.

5. Children should be supervised to ensure that they do not play with the appliance.

6. WARNING: In order to ensure your children's safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

7. Never immerse the appliance in water or any other liquid.

8. Make sure the appliance has been unplugged before cleaning.

9. This appliance must be installed following the national regulations for electrical installations.

10. In case that you need a copy of the instruction manual, you can ask find it in our website: www.orbegozo.com

11. WARNING: In case of misuse, there is a risk of possible injury.

12. This appliance is for household use only.

13. Turn off the appliance from the main switch if you are not going to use it for a long time.

14. The product may be turned on or off under the influence of an electromagnetic power source.
15. Do not touch the fan while it is running.

LED light Fan ON/OFF key of FAN ON/OFF key of light Power switch Charging indicator Power input port USB cable

INSTRUCTIONS FOR USE

1. Charge the lamp. It also works while charging.
2. Make sure the main switch is in the "ON" position.
3. Press the button ⚙ to turn on the light and you will get natural light. Press again for a cool white light, another for a warm white light, and another to turn off the light.
4. Press and hold the button ⚙ to adjust the light intensity
5. Press the button ✿ to turn on the fan. Press it a second time to turn it off.

LOAD

Plug the USB cable into a power outlet. When the charging indicator is on it means that it is charging, when it is turned off the process is complete.

Disposal of old electrical appliances.

The European directive 2012/19/UE on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and

recycling of the materials they contain, and reduce the impact on human health and the environment.

The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

DECLARATION OF CONFORMITY: This device complies with the requirements of the Low Voltage Directive 2014/35/EU and the requirements of the EMC directive 2014/30/EU.