WF457ARGSWR - Washing machine SAMSUNG - Free user manual and instructions

★ ★ ★ ★ ★ 5.0/10 📄 228 pages PDF ⬇️ EN 💬 AI Question 🖨️ Print

USER MANUAL WF457ARGSWR SAMSUNG

Washing Machine user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service or accessory parts, please register your product at or contact www.samsung.com/register 1-800-SAMSUNG (726-7864) WF457ARG* This manual is made with 100% recycled paper. WF457ARG-03153A-07_EN.indd 12013-12-13 10:40:112_ Key features of your new Smart PowerFoam™ washer Key features of your new Smart PowerFoam™ washer

• TheLargestCapacity Samsung’s extra-large capacity laundry machine can wash a full set of your Bedding, PLUS a kingsize comforter or up to 32 bath towels in a single load. Since you don’t have to do as many loads, you save time, money, water and energy.

• 8”LCDTouchScreenDisplay The brilliant 8” Color LCD Touch Screen displays cycle information, settings, options, and more. The easy-to-use interface allows you to scroll through all wash cycles with the slightest touch.

• SmartControl Samsung’s innovative Smart Control technology enables you to control your washer through personal technology devices such as smart phones. You don’t have to be on standby until the cycle ends. Smart Control allows you to monitor the washing process and lets you know when the cycle is complete.

• SmartCare Samsung’s Smart Care, an automatic error-monitoring system, detects and diagnoses problems at an early stage and provides a quick and easy solution through the LCD screen. With the innovative Smart Control technology, you can also be alerted via your smart phone when a problem occurs.

• PowerFoam™ Samsung’s eective PowerForm delivers improved cleanliness with advanced fabric care. PowerFoam allows detergent to disperse evenly and penetrate fabrics faster and deeper.

• SpeedSpray Samsung’s new SpeedSpray technology saves you up to 25%* more time when doing laundry by shortening the wash times while still keeping all segments of the washing process and getting your clothes clean. *Based on 8 pounds loads, Normal cycle (under Normal Soil level without any options), on previous and existing 4.3 cu.ft. Samsung front loading washers released until 2011 without SpeedSpray. **SpeedSpray performs in Normal, Bedding PLUS, Deep Steam, Stain Away and Eco Cold cycle and the saving time may vary by cycles and various load and option compositions.

• VRTplus™(VibrationReductionTechnology) This Samsung washer minimizies noise and vibrations with dual 3D vibration sensors and smart control technology, ensuring a quiet operation.

• DeepSteam The Deep Steam feature boosts cleaning performance and loosens grime and dirt, remove thus providing a superior cleaning result.

• PureCycle™(TubCleaningcycle) Clean your drum with a single button! This Pure Cycle is specially designed to remove detergent residue and dirt buildup in the tub, diaphragm and on the door glass without the need for special chemical detergents. WF457ARG-03153A-07_EN.indd 22013-12-13 10:40:12Key features of your new Smart PowerFoam™ washer _3

• DiamondDrum™ Takes gentle care of your fabrics. With inside holes 36% smaller than those of conventional drums, the diamond drum prevents fabrics from sticking out through the holes and consequently being damaged.

• DDMotor The power to handle anything! Our direct-drive inverter motor delivers power right to the washer tub from a variable speed, reversible motor. A beltless direct-drive motor generates a higher spin speed of 1,300 rpm for a more eective, quieter operation. The washer also has fewer moving parts, meaning fewer repairs.

• Sanitize When you select the NSF certified Sanitize cycle, the water is heated to an extra high temperature and removes 99.9% of certain bacteria typically found on clothing, bedding or towels. This certification is awarded by NSF International, an independent third-party testing and certification organization. Please check the garment care label to avoid garment damage. Only sanitizing cycles have been designed to meet the requirements of this protocol for sanitization ecacy.

• PedestalwithStorageDrawers(ModelNo:WE357*) An optional 15” pedestal is available to raise the washer for easier loading and unloading. It also oers a built-in storage drawer that can hold a 100 oz. bottle of detergent

• Stacking(ModelNo:SK-5A/XAA) Samsung washers and dryers can be stacked to maximize usable space. An optional stacking kit is available for purchase from your Samsung retailer. <Pedestal with Storage Drawers> <Stacking> NSF Protocol P172 Sanitization Performance of Residential and Commercial, Family-Sized Clothes Washers WF457ARG-03153A-07_EN.indd 32013-12-13 10:40:124_ Safety instructions

SAVE THESE INSTRUCTIONS

Safety information Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your washer’s many benefits and features. WHATYOUNEEDTOKNOWABOUTSAFETYINSTRUCTIONS The Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution, and care when installing, maintaining and operating your washer. IMPORTANTSAFETYSYMBOLSANDPRECAUTIONS What the icons and signs in this user manual mean: WARNINGHazards or unsafe practices that may result in severe personal injury or death.To reduce the risk of fire, explosion, electric shock, or personal injury when using your washer, follow these basic safety precautions:CAUTIONHazards or unsafe practices that may result in minor personal injury or property damage.Do NOT attempt.Do NOT disassemble.Do NOT touch.Follow directions explicitly.Unplug the power plug from the wall socket.Make sure the machine is grounded to prevent electric shock.Call the service center for help. Note Thesewarningsignsareheretopreventinjurytoyouandothers.Pleasefollowthemexplicitly.Afterreadingthissection,keepitinasafeplaceforfuturereference.WF457ARG-03153A-07_EN.indd 42013-12-13 10:40:12Safety instructions _5

SAVE THESE INSTRUCTIONS

WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following:

1. Read all instructions before using the appliance.

2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or

spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances as they give o vapors that could ignite or explode.

3. Do not allow children to play on or in the appliance. Close supervision of children is

necessary when the appliance is used near children.

4. Before the appliance is removed from service or discarded, remove the door to the washing

or drying compartment.

5. Do not reach into the appliance if the drum is moving.

6. Do not install or store this appliance where it will be exposed to the weather.

7. Do not tamper with controls.

8. Do not repair or replace any part of the appliance or attempt any servicing unless specifically

recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.

9. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to

the wash water. These substances give o vapors that could ignite or explode.

10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not

been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washer or combination washer-dryer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time. State of California Proposition 65 Warnings:

WARNING:This product contains chemicals known to the State of California to cause cancer and

reproductive toxicity. WARNINGWARNING WF457ARG-03153A-07_EN.indd 52013-12-13 10:40:126_ Safety instructions

SAVE THESE INSTRUCTIONS

Safety instructions CRITICALINSTALLATIONWARNINGS Plug the power cord into an AC 120 V / 60 Hz / 15 A wall socket or higher and use the socket for this appliance only. In addition, do not use an extension cord. - Sharing a wall socket with other appliances, using a power strip, or using an extension cord may result in electric shock or fire. - Do not use an electric transformer. It may result in electric shock or fire. - Ensure that the voltage, frequency, and amperage provided at the wall socket match the power specifications of the product. The installation of this appliance must be performed by a qualified technician or service company. - Failing to do so may result in electric shock, fire, an explosion, problems with the product, or injury. Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis. - Unplug the power plug and clean it with a dry cloth. - Failing to do so may result in electric shock or fire. Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor. - If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fire. This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line. - Improper grounding may result in electric shock, fi re, an explosion, or problems with the product. - Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national codes. Do not install this appliance near a heater or inflammable material. Do not install this appliance in a humid, oily or dusty location, or in a location exposed to direct sunlight and water (rain drops). Do not install this appliance in a location where gas may leak. - This may result in electric shock or fire. Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged power cord, or loose wall socket. - This may result in electric shock or fire. Do not pull or excessively bend the power cord. Do not twist or tie the power cord. Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance. - This may result in electric shock or fire. WARNINGWF457ARG-03153A-07_EN.indd 62013-12-13 10:40:13Safety instructions _7

SAVE THESE INSTRUCTIONS

Do not pull the power cord when unplugging the power plug. - Unplug the power plug by holding the plug. - Failing to do so may result in electric shock or fire. If the power plug or power cord is damaged, contact your nearest service center. INSTALLATIONCAUTIONS Position the appliance so that the power plug is easily accessible. - Failing to do so may result in electric shock or fire due to electric leakage. Install your appliance on a level and hard floor that can support its weight. - Failing to do so may result in abnormal vibrations, noise, or problems with the product. Unplug the power plug when the appliance is not being used for long periods of time or during a thunder/lightning storm. - Failing to do so may result in electric shock or fire. CRITICALUSAGEWARNINGS If the appliance is flooded, cut the power immediately and contact your nearest service center. If the appliance emits a strange noise, a burning smell, or smoke,, unplug the power plug immediately and contact your nearest service center. - Failing to do so may result in electric shock or fire. In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power plug. Do not touch the appliance or power cord. - Do not use a ventilating fan. - A spark may result in an explosion or fire. Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or other flammable or explosive substances. - This may result in electric shock, fire or an explosion. Do not open the washer door by force while the washer is operating (high-temperature washing/drying/spinning). - Water flowing out of the washer may result in burns or cause the floor to be slippery. This may result in injury. - Opening the door by force may result in damage to the product or personal injury. Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washer before using it. Do not insert your hand under the washer. - This may result in injury. CAUTIONWARNING WF457ARG-03153A-07_EN.indd 72013-12-13 10:40:138_ Safety instructions

SAVE THESE INSTRUCTIONS

Safety instructions Do not touch the power plug with wet hands. - This may result in electric shock. Do not turn the appliance o by unplugging the power plug while an operation is in progress. - Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fire. Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children. - If a child places a bag over its head, it may result in suocation. Do not let children or infirm persons use this washer unsupervised. - Failing to do so may result in electric shock, burns or injury. Do not insert your hand or a metal object under the washer while it is operating. - This may result in injury. Make sure the detergent drawer is closed before you put laundry into the washer or remove laundry from the washer. - If the detergent drawer is open, you could strike the drawer with your head and injure yourself. Do not attempt to repair, disassemble, or modify the appliance yourself. - Do not use any fuse (such as cooper, steel wire, etc.) other than the standard fuse. - If you need to repair or reinstall the appliance, contact your nearest service center. - Failing to do so may result in electric shock, fire, problems with the product, or injury. If water has enters the appliance anywhere but the drum, unplug the power plug and contact your nearest service center. - Failing to do so may result in electric shock or fire. When the water supply hose comes loose from the faucet and floods the appliance, unplug the power plug. - Failing to do so may result in electric shock or fire. If any foreign substance enters the appliance, unplug the power plug and contact you nearest service center. - Failing to do so may result in electric shock or fire. USAGECAUTIONS If the the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power plug and clean the washer using a damp, soft cloth. - Failing to do so may result in discoloration, deformation, damage or rust. If struck hard, the front glass can break. Take care when using the washer. - If the glass is broken, it may result in injury. CAUTIONWF457ARG-03153A-07_EN.indd 82013-12-13 10:40:13Safety instructions _9

SAVE THESE INSTRUCTIONS

After a water supply failure or when reconnecting the water supply hose, open the faucet slowly. Open the faucet slowly after a long period of non-use. - The air pressure in the water supply hose or the water pipe may result in damage to a part or in water leakage. If a drain error occurs during an operation, check if there is a drainage problem. - If the washer is used when it is flooded because of a drainage problem,, it may result in electric shock or fire due to electric leakage. Insert the laundry into the washer completely so that laundry does not get caught in the door. - If laundry gets caught in the door, it may result in damage to the laundry or the washer, or result in water leakage. Ensure that the faucet is turned o when the washer is not being used. - Ensure that the screw on the water supply hose connector is firmly connected to the faucet and properly tightened. - Failing to do so may result in property damage or injury. Take care that the Rubber Seal and the Front Door Glass are not contaminated by a foreign substance (e.g. waste, thread, hair, etc.) - If a foreign substance is caught in the door or the door is not completely closed, it may cause water leakage. Open the faucet and check if the water supply hose connector is firmly tightened and that there is no water leaking before using the product. - If the water supply hose connectors are loose, it may result in water leakage. The product you have purchased is designed for domestic use only. The use for business purposes qualifi es as product misuse. In this case, the product will not be covered by the standard warranty provided by Samsung and no responsibility can be attributed to Samsung for malfunctions or damages resulting from such misuse. If the wash is not performed and the laundry is left for a period of time after adding detergent or applying stain remover or pre-treatment onto the laundry, the laundry may be discolored. Select the recommended cycle and temperature on the basis of the laundry items, sort the laundry by color on the basis of its colorfastness and select the appropriate cycle. Make sure that foreign objects such as pins, buttons and coins are removed from clothing items when adding laundry into the washer. Wash dirty laundry separately from relatively clean items and wash fragile items separately from tougher textiles. If an item is stained, wash it as fast as possible. Use stain remover or detergent only after testing the colorfastness of the item by applying a small quantity to an inside seam. WF457ARG-03153A-07_EN.indd 92013-12-13 10:40:1310_ Safety instructions

SAVE THESE INSTRUCTIONS

Safety instructions Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance. - This may result in electric shock, fire, problems with the product, or injury. Do not operate the appliance with wet hands. - This may result in electric shock. Do not spray volatile material such as insecticide onto the surface of the appliance. - As well as being harmful to humans, it may also result in electric shock, fire or problems with the product. Do not place an object that generates a electromagnetic field near the washer. - This may result in injury due to a malfunction. Since the water drained during a high-temperature wash or drying cycle is hot, do not touch the water. - This may result in burns or injury. Do not wash, spin or dry water-proof seats, mats or clothing (*). - Do not wash thick, hard mats even if the washer mark is on the care label. - This may result in injury or damage to the washer, walls, floor or clothing due to abnormal vibrations.

• Woolen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers, sweat suits, and bicycle, motor cycle, car covers, etc. Do not operate the washer when the detergent box is removed. - This may result in electric shock or injury due to water leakage. Do not touch the inside of the tub during or just after drying as it is hot. - This may result in burns. Do not insert your hand into the detergent dispenser after opening it. - This may result in injury as your hand may be caught. Do not place any non-laundry objects, such as shoes, food waste, or animals into the washer. - This can cause abnormal vibrations that can damage the washer, and, in the case of pets, cause severe injury or death. Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc. - This may result in electric shock or injury. Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops or massage clinics. - This may result in the rubber seal becoming deformed and water leakage. Do not leave metal objects (safety pins, hair pins, etc.) or bleach in the tub for long periods of time. - This may cause the tub to rust. - If rust appears on the surface of the tub, apply a neutral cleansing agent to the surface and use a sponge to clean it. Never use a metal brush. WF457ARG-03153A-07_EN.indd 102013-12-13 10:40:13Safety instructions _11

SAVE THESE INSTRUCTIONS

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry cleaning detergent. - This may result in spontaneous combustion or ignition due to the heat from the oxidation of the oil. Do not use hot water from water cooling/heating devices. - This may result in problems with the washer. Do not use natural hand-washing soap in the washer. - If it hardens and accumulates inside the washer, it may result in problems with the product, discoloration, rust or bad odors. Do not wash large laundry items such as bedding in the washing net. - Failing to do so may result in injury due to abnormal vibrations. - Place smaller items, such as lace socks and lingerie in the washing net. Do not use hardened detergent. - If it accumulates inside the washer, it may cause water leakage. Do not wash throw rugs or doormats. - If you wash throw rugs or doormats, sand will accumulate inside the washer. It may result in errors such as no draining. Take care that children’s fingers are not caught in the door when closing it. - This may result in injury. CRITICALCLEANINGINSTRUCTIONS Do not clean the appliance by spraying water directly onto it. Do not use the strong acid cleaning agent. Do not use benzene, thinner or alcohol to clean the appliance. - This may result in discoloration, deformation, damage, electric shock or fire. Before cleaning or performing maintenance, unplug the appliance from the wall socket. - Failing to do so may result in electric shock or fire. WARNING WF457ARG-03153A-07_EN.indd 112013-12-13 10:40:1312_ Safety instructions

SAVE THESE INSTRUCTIONS

FCC CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received including interference that cause undesired operation.For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. FCC STATEMENT: This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna•Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a dierent circuit from that to which the receiver is connected•Consult the dealer or an experienced radio/TV technician for help. FCC RADIATION EXPOSURE STATEMENT: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.CAUTIONWF457ARG-03153A-07_EN.indd 122013-12-13 10:40:13Safety instructions _13

SAVE THESE INSTRUCTIONS

The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. IC RADIATION EXPOSURE STATEMENT: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Open Source License Notice This device uses open source software. Open Source Licenses are available on the product menu. Tap “Settings > Network > Software Update > Legal Information” on the device for more details. WF457ARG-03153A-07_EN.indd 132013-12-13 10:40:1314_ Contents Contents INSTAllING yOUR WASHER

16 Unpacking your washer 16 Overview of your washer 17 Meeting the installation requirements 17 Electrical supply and grounding 17 Water supply 18 Drain 18 Flooring 18 Surrounding temperature 18 Alcove or closet installation 20 Installing your washer 20 Installation flow chart 25 Setting up your washer for the first time 25 Choosing the language 25 Setting the current date 26 Setting the current time 26 Setting the Automatic Update WASHING A lOAd OF lAUNdRy

27 Washing for the first time 27 Basic instructions 28 Using the control panel 29 Available cycles 30 Specialty Cycles 30 Available options 31 Available actions 33 Washing your laundry using the Cycle Selection screen 35 Using the My Cycle function 36 Using the Delay Start function 37 Using the Child Lock function 38 Turning the Light On and O 38 Controlling the sound volume 38 DEEP STEAM 39 Controlling the brightness level 40 Using the Stain Guide 41 Viewing the Energy Eciency 41 Using the Smart Grid 42 ATC (Auto Temperature Control) 43 Detergent use 43 Using the detergent drawer 43 Automatic dispenser 43 Detergent compartment 44 Pre wash compartment 44 Bleach compartment 44 Fabric softener compartment WF457ARG-03153A-07_EN.indd 142013-12-13 10:40:13Contents _15 USING yOUR mObIlE PHONE

45 Configuring your washer’s network settings and connecting to your network 45 Configuring the IP address settings 46 Connecting your washer to the network 46 Turning on your washer’s Wi-Fi networking function 47 How to update the software 48 Downloading and running the mobile app, Samsung Smart Washer/Dryer App 50 Using the mobile App 50 Disconnecting the connection 51 Starting a new wash 52 Registering your washer 54 Overview for Wi-Fi Settings and AP Connection mAINTAINING yOUR WASHER

55 Cleaning the exterior 55 Cleaning the interior 55 Cleaning the dispensers 55 Storing your washer 56 Cleaning the debris filter 57 Cleaning the door seal/bellow 57 Preserving the top cover and the front frame 58 Pure Cycle

65 Fabric care chart 66 Cycle chart 68 Helping the environment 68 Declaration of conformity 68 Specifications WF457ARG-03153A-07_EN.indd 152013-12-13 10:40:1316_ Installing your washer Installing your washer UNPACKINGYOURWASHER Unpack your washer and inspect it for shipping damage. Make sure you have received all the items shown below. If your washer was damaged during shipping, or you do not have all the items, contact 1-800-SAMSUNG (726-7864). To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit. The packaging materials can be dangerous to children; keep all packaging material (plastic bags, polystyrene, etc.) well out of the reach of children. OVERVIEWOFYOURWASHER Adjustable legs Cold water supply hose Hot water supply hose Drain Hose Detergent drawer Control panel Door Tub Debris filter Drain tube Filter cover Parts supplied Wrench Bolt hole covers Water supply hoses Hose guide User manual Plastic zip hose tie Tools needed Pliers Flat screwdriver WARNING WF457ARG-03153A-07_EN.indd 162013-12-13 10:40:16Installing your washer _17 01INSTALLINGYOURWASHER MEETINGTHEINSTALLATIONREQUIREMENTS Electrical supply and grounding Never use an extension cord. Use only the power cord that comes with your washer. When preparing the installation, ensure that your power supply oers: An AC 120 V / 60 Hz / 15-amp fuse or circuit breaker An individual branch circuit dedicated to your washer Your washer must be grounded. If your washer malfunctions or breaks down, grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current. Your washer comes with a power cord that has a three-prong grounding plug for use in a properly installed and grounded outlet. Never connect the ground wire to plastic plumbing lines, gas lines or hot water pipes. Improperly connecting the equipment-grounding conductor can result in electric shock. Check with a qualified electrician or serviceman if you are unsure if the washer is properly grounded. Do not modify the plug provided with the washer. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Important safety precautions To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision and local codes and ordinances. It is the personal responsibility of the appliance owner to provide adequate electrical service for this appliance. Water supply Your washer will fill properly when your water pressure is between 20 psi (137 kPa) to 116 psi (800 kPa). A water pressure less than 20 psi (137 kPa) may cause a water valve failure and not allow the water valve to shut o completely. Alternatively, it may take the washer than allowed by the controls, causing your washer to turn o. (A fill-time limit has been built into the controls, designed to prevent overflows or flooding if an internal hose becomes loose.) The water taps must be within 4 feet (122 cm) of the back of your washer for the provided water supply hoses to reach your washer. Most plumbing supply stores sell water supply hoses of various lengths up to 10 feet (305cm) long. You can reduce the risk of leaks and water damage by:

Before using your washer for the first time, check all connections at the water valve and taps for leaks. Using hard water or bad quality water may cause the water supply valve to operate abnormally. WARNINGWARNINGWARNINGCAUTIONCAUTIONWARNINGCAUTIONWF457ARG-03153A-07_EN.indd 172013-12-13 10:40:1618_ Installing your washer Installing your washer Drain Samsung recommends a standpipe height of 18 in (46 cm). The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose. The drain hose is attached at the factory. Flooring For best performance, your washer must be installed on a solidly constructed floor. Wooden floors may need to be reinforced to minimize vibrations and/or unbalanced loads. Carpeting and soft tile surfaces are contributing factors to vibrations and the tendency for your washer to move slightly during the spin cycle. Never install your washer on a platform or poorly supported structure. Surrounding temperature Do not install your washer in areas where water may freeze, since your washer always retain some water in the water valve, pump and hose areas. Frozen water in the lines can cause damage to the belts, the pump and other components. Alcove or closet installation To operate safely and properly, your new washer requires the following minimum clearances: Sides 1 in / 25 mm Rear 5.9 in / 150mm Top 17 in / 432 mm Front 2 in / 51 mm If both the washer and a dryer are installed together, the front of the alcove or closet must have an unobstructed air opening of at least 72 in² (465 cm²). Your washer by itself does not require a specific air opening. 1in. (2.5cm) 1in. (2.5cm) 1in. (2.5cm) 27in. (68.6cm) 27in. (68.6cm) 2in. (5cm) 5.9in. (15cm) 34.1in. (86.5cm) 17in. (43.2cm) Recessed area Side view - closet or confined area WARNING WF457ARG-03153A-07_EN.indd 182013-12-13 10:40:17Installing your washer _19 01INSTALLINGYOURWASHER When installing your washer under the counter (washer only) 1in. (2.5cm) 1in. (2.5cm) 27in. (68.6cm) 39.6in. (100.6cm) When installing your washer with an optional pedestal base or stacking kit Required dimensions for an installation with a pedestal Required dimensions for an installation with a stacking kit 27in. (68.6cm) 39in. (99cm) 5.9in. (15cm) 34.1in. (86.5cm) 51.2in.(130cm)toclearopendoor 53.6in. (136.2cm) 1in. (2.5cm) 27in. (68.6cm) 78in. (198cm) 6in.* (15.2cm) 48in.²* (310cm²) 24in.²* (155cm²) 3in. (7.6cm) 3in. (7.6cm) 1in. (2.5cm) 34.1in. (86.5cm) 5.9in.** (15cm) 5in. (12.7cm) ClosetorDoor It is not recommended to stack DV457* on WF457. (it might be hard to control dryer LCD because of the viewing angle.)

• Required spacing ** An external exhaust elbow requires additional space. WF457ARG-03153A-07_EN.indd 192013-12-13 10:40:1820_ Installing your washer Installing your washer INSTALLINGYOURWASHER Before STEP 5 is complete, do not plug the power cord into a wall socket. Packaging materials can be dangerous to children; keep all packaging material (plastic bags, polystyrene, etc.) well out of the reach of children. Installation flow chart Selecting a locationRunning a Calibration mode (Refer to the following description) Finish the installationRemoving the shipping bolts (*Drum only)Connecting the water and the drainAdjusting the levelling feetPowering your washing machine[Running a test cycle]Run a test cycle (Rinse+Spin) with small amount of laundary (about 4~5 Towels) Yes Please check again before steps. Does your washer have excess vibration or noise? STEP 1 Selecting a location Before you install the washer, make sure the location:

away from direct sunlight

STEP 2 Removing the shipping bolts Before installing the washing machine, you must remove all shipping bolts from the back of the unit.

1. Hold the shipping bolt with your hand and pull it through

the wide section of the hole. Repeat for each shipping bolt.

2. Fill the holes with the supplied bolt hole covers.

3. Store the shipping bolts in a safe location where they can

be easily retrieved in the event that you have to move the washing machine in the future. CAUTIONWARNINGWF457ARG-03153A-07_EN.indd 202013-12-13 10:40:18Installing your washer _21 01INSTALLINGYOURWASHER STEP 3 Connecting the water and the drain Connecting the water supply hose Do not connect multiple water supply hoses. This may result in a water leakage and electric shock due to the water leakage. If the hose is too short, replace the hose with a longer, high pressure hose.

1. Connect one end of the COLD water supply hose to the

COLD water supply intake at the back of the washer.

2. Tighten part (A) by hand until it is snug, then make two-

thirds of a turn with a wrench.

3. On the other end of the hose, check for one rubber washer

per hose and install each water supply hose to the faucet. Make sure the hose with the printed word HOT is attached to the HOT faucet.

4. Tighten part (A) by hand until it is snug, then make two-

thirds of a turn with a wrench. For the correct water use, connect both the HOT and COLD water faucets. If either or both are not connected, an “nF” (no fill) error can occur. After you have connected the water supply hose to the faucet, ensure that it is connected correctly by pulling the water supply hose downwards. Check if the water supply hose is not twisted or bent. If the hose is twisted or bent, there is a danger of a water leakage and electric shock due to the water leakage.

5. Turn on the HOT and COLD water supply and check all

connections at the water intake and the faucet for leaks. Cold Hot Rubber Washer

CAUTIONWARNINGWF457ARG-03153A-07_EN.indd 212013-12-13 10:40:1922_ Installing your washer Installing your washer Connecting the drain hose The end of the drain hose can be positioned in three ways: Overtheedgeofawashbasin The drain hose must be placed at a height between 23.6 in (60cm) and 35.4 in (90cm). To keep the drain hose spout bent, use the supplied plastic hose guide (A). Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving. Inastandpipeorlaundrytub We recommend using a 20 in (52 cm) high vertical pipe or laundry tub. It must be no shorter than 18 in (46 cm) and no longer than 96 in (245 cm). Make sure that the connection between the drain hose and the standpipe is NOT airtight. If drain hose is installed below 18”(46cm), water can be drained in cycle working cause of siphon phenomenon. It causes the washer to “nF” error. Drain Hose can be installed until 96”(245cm) maximum. But drain capability can be reduced at this height. It causes the washer to have odor, because of remained water in the drain system. Connection the hose guide within 6”(15cm) from the end of the drain hose. If the drain hose is extended more than 6”(15cm) beyond the end of the hose guide, mold or microorganisms could spread to the inside of the washer. 96” max18” minHose retainerTie strap Laundrytub 96” max18” minHose retainerTie strap Standpipe 1RPRUHWKDQರFP +RVH*XLGH WF457ARG-03153A-07_EN.indd 222013-12-13 10:40:20Installing your washer _23 01INSTALLINGYOURWASHER STEP 4 Adjusting the levelling feet When installing your washing machine, ensure that the power plug, the water supply and the drain are easily accessible.

1. Slide the washing machine into position.

2. Loosen all the lock nuts with the supplied wrench.

3. Level your washing machine by turning the levelling feet in

and out as necessary by hand.

4. When your washing machine is level, tighten the locking

nuts using a wrench or flathead screwdriver. Your washer must be level on all four sides. A carpenter’s level should be used on all four corners of your washer. It’s a good idea after the first dozen washes to make sure your washer is still level. Avoid damage to the legs. Do not move the washer unless the locking nuts are fastened to the bottom of the washer. WF457ARG-03153A-07_EN.indd 232013-12-13 10:40:2124_ Installing your washer Installing your washer STEP 5 Powering your washing machine Plug the power cord into a wall socket, an AC 120V / 60Hz approved electrical outlet protected by a 15-amp fuse or circuit breaker. (For more information on the electrical and grounding requirements, refer to the “Electrical supply and grounding” section on page 17.) When the power plug is connected, the Samsung logo is displayed for about 15 seconds before the screen turns o. Press the Power button to use your washer. The process shown in this figure is a preparation step for using your washer. It is not an indication of a failure. Test run Make sure that you install your washing machine correctly by running the Rinse+Spin cycle after the installation is complete. STEP 6 Calibration mode Before using Calibration mode, be sure to take all items out of the drum. Your Samsung washing machine automatically detects the weight of the laundry. For a more accurate weight detection, please run Calibration Mode after the installation. To run Calibration Mode, follow these steps:

1. Turn on the washer.

2. Tab Settings and then CalibrationMode.

3. Remove any contents in the tub and close the

6. The drum rotates clockwise and

counterclockwise for approximately 3 minutes.

7. When Calibration Mode is finished, the “Cycle

complete” message appears on the display and the washing machine turns o automatically. The washing machine is now ready for use. WF457ARG-03153A-07_EN.indd 242013-12-13 10:40:21Installing your washer _25 01INSTALLINGYOURWASHER SETTINGUPYOURWASHERFORTHEFIRSTTIME When your washer is turned on for the first time, the intro animation is played which shows the Samsung logo and is played each time your washer is turned in the LCD panel and then you are guided through the initial setup procedures. Through this procedure you can set your preferences for use of your washer. This procedure consists of the following 5 steps:

1. Choosing your language

2. Setting the current date

3. Notification for setting up your mobile network

other unwanted cycle or option may be selected.

Choosing the language

1. Tap the language you want to use for the

controls, instructions and descriptions shown on the LCD panel. There are 4 available languages: English, Español (Spanish), Français (French) and Português (Portuguese).

2. Tap the Next button when done.

Setting the current date

1. Tap the up and down arrows to set the date.

Tap the left and right arrows at the bottom o the screen to move to other calendar months.

2. Tap the Next button when done.

WF457ARG-03153A-07_EN.indd 252013-12-13 10:40:2226_ Installing your washer Installing your washer Setting the current time

1. Set the time by tapping on the up and down

2. Tap the Next button when done.

Setting the Automatic Update

1. The Automatic Update function allows various

updates such as performance improvements, patches and bug fixes to be installed automatically by communicating with the update server.

2. When you agree to this setting, you are

considered as having agreed to the terms and conditions for the Automatic Update function.

3. When the software is updated, some functions

provided by the previous software version may be unavailable depending on the update. After completing the initial setup, you can access each step and change your preferences any time using the Settings control located at the bottom right of the CycleSelection screen displayed on the LCD panel. For example, If you want to set the time again...

1. Tap the Settings at the bottom right of the CycleSelection screen.

2. Tap the Time & language at the Settings screen.

3. Tap the Change button under the Time.

4. Tap the up and down arrows to change the time.

5. Tap the OK button.

You can view and change the settings of the Language, Date, and Network through the same steps above. WF457ARG-03153A-07_EN.indd 262013-12-13 10:40:22Washing a load of laundry _27 02WASHINGALOADOFLAUNDRY Washing a load of laundry With your new Samsung washer, the hardest part of doing laundry will be deciding which load to wash first. To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. WASHINGFORTHEFIRSTTIME Before washing laundry for the first time, you must run a complete cycle with the washer empty.

1. Press the Power button.

2. Add a little detergent to the detergent compartment

the detergent drawer.

3. Turn on the water supply to the washer.

4. Press the Start/Pause button.

The washer runs the Normal cycle, this is the factory default cycle the washer will run until you select another cycle. The first empty cycle removes any water that might be left over in the machine from the manufacturer’s test run. Compartment Detergent for Prewash or Starch. Compartment Detergent for Main Wash, water softener. Compartment Bleach. To use liquid detergent, use the liquid detergent compartment. Do not add powdered detergent to the liquid detergent box. Compartment For additives, for example, fabric softener. Fill no higher than the lower edge (labeled MAX). BASICINSTRUCTIONS Before washing laundry for the first time, you must run a cycle with the washer empty.

1. Press the Power button.

2. Load your laundry into the washer.

Do not overload the washer. To determine the load capacity for each type of laundry, refer to the “Cycle chart” section on page 66.

cycle. Remove any remaining detergent, as this can cause a leak.

You may be exposed to hot water or steam.

3. Close the door until it latches.

4. Add detergent and additives to the detergent drawer.

5. Select the appropriate cycle and options on the LCD panel. The selected cycle and its

selected options light up and the estimated cycle time appears at the top right of the LCD panel.

CyClE PANE Select the cycle you want to use for your laundry. The Cycle pane contains a list of cycles that you can scroll down or up. To view more cycles, drag from the bottom to the top along the Cycle pane.

• FormoreinformationonthecyclesyoucanselectintheCyclepane, refer to the “Available cycles” section on page 29.

OPTION PANE Displays the currently selected options for the selected cycle and allows you to change them. There are four options: Temperature, Spin Speed, Soil Level and Extras. For more information on the options you can select in the Options pane, refer to the “Available options” section on page 30.

CyClE TImE SECTION Displays the estimated amount of time the selected cycle and its selected options will take to complete.

ECO bAR SECTION Displays the energy eciency of the selected cycle by showing the estimated environmental friendliness of the selected cycle and its selected options on a scale.

ACTIONS SECTION Provides the following additional controls that allow you to carry out additional actions and view and configure other settings: Smart Control, Save as My Cycles, Delay Start, Child Lock, Light, and Settings. For more information on the additional controls you can use in the Actions section, refer to the “Available actions” section on page 31.

WF457ARG-03153A-07_EN.indd 282013-12-13 10:40:24Washing a load of laundry _29 02WASHINGALOADOFLAUNDRY Available cycles The preset cycles listed in the Cycle pane of the CycleSelection screen are listed below including the Specialty Cycles. MyCyclesShows the 3 custom or favourite cycles you saved as My Cycles. Each My Cycle remembers the temperature, spin speed, soil level and extra cycle options you set so that you can use them easily to wash specific laundry items. EcoColdThe Eco Cold cycle is an energy saving daily care cycle for normally and lightly soiled laundry that uses only cold water. NormalThe Normal Cycle is for most fabrics including cotton, linen and normally soiled garments. HeavyDutyThe Heavy Duty cycle is for sturdy, colorfast fabrics and heavily soiled garments. PermPressThe Perm Press cycle is for wash-and-wear, synthetic fabrics and lightly to normally soiled garments. Delicates/Hand Wash The Delicates/Hand Wash cycle is for sheer fabrics, bras, lingerie (silk) and other handwash-only fabrics. For best results, use liquid detergent. ActiveWearThe Active Wear cycle is for exercise wear such as sports jerseys, training pants and other performance clothing. BeddingPLUSThe Bedding PLUS cycle is for bulky items such as blankets, comforters and sheets. When you are washing bulky items, use liquid detergent. DEEPSTEAMThe DEEP STEAM cycle is for heavily soiled, colorfast garments. It provides a high wash temperature and steam and cleans stains eectively. StainAwayThis cycle provides an outstanding stain removal performance, with the utmost gentle care. SanitizeThe Sanitize cycle is for heavily soiled, colorfast garments. This cycle heatsthewaterto150°F(65.6°C)toeliminatebacteria. WoolThe Wool cycle is for machine-washable wool. Loads should be under 8 pounds. For best results, we recommend a load of 4.4 pounds (2 kg) or less. The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products, provided that the products are washed according to the instructions on the garment label and those issues by the manufacturer of this washer, M1207. QuickWashThe Quick Wash cycle is for lightly soiled garments that you need quickly. Rinse+SpinThe Rinse+Spin cycle is for loads that need rinsing only or when you need to add fabric softener to a load. SpinOnlyThe Spin Only cycle performs an additional spin cycle to remove more water. PureCycleThe Pure Cycle cleans dirt and bacteria from the drum. Regular use (after every 40 washes) is recommended. No detergent or bleach is needed. WF457ARG-03153A-07_EN.indd 292013-12-13 10:40:2430_ Washing a load of laundry Washing a load of laundry Specialty Cycles Specialty Cycles provide 6 ready-to-use cycles to meet all your laundry needs. For laundry that goes beyond the “everyday” type of wash, Specialty Cycles provide the optimal settings to clean all potential stains and dirt based on the type of stain.

1. Tap Specialty Cycles in the Cycle pane. 6 cycles will be displayed.

3. Specialty Cycles provide the optimal wash settings to clean stained clothes depending on

the type of stain without setting the soil level, water temperature and other options. Depending on the selected cycle, some settings and options are unavailable and are shown as disabled. Adjusting the water temperature is unavailable as Specialty Cycles provide the optimal temperature setting to clean each type of stain. However, if you have heavily or lightly soiled garments, you can adjust the soil, and the Specialty Cycles will automatically adjust the water temperature, washing time and other options for the best stain removal performance. Cooking&DiningThe Cooking & Dining cycle is for most fabrics used with food or cooking. This cycle removes food and cooking stains eectively. DO NOT use this cycle for laundry contaminated by oil/grease. Gardening&Yard Work The Gardening & Yard Work cycle is for gardening clothes. This cycle removes grass, mud/dirt stains and cleans sweat and sebum eectively. DO NOT use this cycle for laundry contaminated by oil/grease. Working& Everyday The Working & Everyday cycle is for lightly soiled clothing including synthetics. This cycle removes slightly soiled ink stains and cleans daily dirt eectively. DO NOT use this cycle for laundry contaminated by oil/grease. Outdoors&TravelThe Outdoors & Travel cycle is for normally soiled outdoor clothing including synthetics. This cycle removes grass, mud/dirt, slightly soiled food stains and cleans sweat and make-up stains eectively. ActiveKidsThe Active Kids cycle is for most kids wear. This cycle removes food, beverage, mud/dirt and ink/crayon stains eectively. BabyCareThe Baby Care cycle is for baby items including baby clothes, underwear, pillow covers, bed sheets, cloth diapers. This cycle removes urine/feces, vomit stains etc. eectively. Available options You can view the currently selected options for the selected cycle and change them in the Options pane of the CycleSelection screen. There are four options: Temperature, Spin speed, Soil level, and Extras. Temperature Tap this option to change the currently selected temperature setting. The available temperature settings are Cold, Eco Warm, Warm, Hot, and Extra Hot. However, depending on the selected cycle, some of them are unavailable and are shown as disabled. WF457ARG-03153A-07_EN.indd 302013-12-13 10:40:24Washing a load of laundry _31 02WASHINGALOADOFLAUNDRY Spin Speed Tap this option to change the currently selected spin speed setting. The available spin speed settings are No spin, Low, Medium, High, and Extra High. However, depending on the selected cycle, some of them are unavailable and are shown as disabled. Soil level Tap this option to change the currently selected soil level setting. The available soil level settings are Extra Light, Light, Normal, Heavy, and Extra Heavy. However, depending on the selected cycle, some of them are unavailable and are shown as disabled. Use this option to remove stains from your laundry eectively. Extras Tap this option to add or remove the extra cycles to or from the selected cycle. The available extra cycles are Prewash, Steam, Extra Rinse, and Extra Spin. However, depending on the selected cycle, some of them are unavailable and are shown as disabled. An extra cycle added to the selected cycle is shown with a checked icon. For example, is displayed when the Prewash cycle is added. is displayed when it is removed. Tap each enabled extra cycle to add it or remove it from a selected cycle. Available actions You can carry out additional actions and view and configure other settings using the controls provided in the Actions section of the CycleSelection screen. There are six controls: Smart Control, Save as My Cycles, Delay Start, Child Lock, Light, and Settings. Smart Control Tap this control to turn the Smart Control function on or o. When this function is turned on, you can control the washer using your mobile phone. When this function is turned o, the icon is . When it is turned on, the icon is . Turn this control on if you want to control your washer using your mobile phone. Any actions performed on your washer will turn o the Smart Control Function (tapping the LCD panel, pushing buttons, etc.). Save As My Cycles Save your favourite cycles including the temperature, spin speed, soil level and extra cycle options. You can save up to 3 My Cycles. For more information, refer to the “Using the My Cycle function” section on page 35. Delay Start Tap this control to delay the start of the selected cycle by setting a specific start time. If the washer recognizes that the Smart Grid is available, the options for turning variable energy use on or o are accessible. When Delay Start is turned on, the icon changes from to . For more information, refer to the “Using the Delay Start function” section on page 36. WF457ARG-03153A-07_EN.indd 312013-12-13 10:40:2432_ Washing a load of laundry Washing a load of laundry Child Lock Activate and deactivate the Child Lock function using this control.

• Tap this control to activate the deactivated Child Lock function (

• Hold down this control for 6 seconds to deactivate the activated Child Lock function (

• The Child Lock function can be also enabled temporarily and the icon is displayed in this case. For detailed information on the Child Lock function, refer to the “Using the Child Lock function” section on page 37. Light Tap this control to turn the light on or o. When the light is turned o, the icon is . When it is turned on, the icon is

For more information, refer to the “Turning the Light On and O” section on page 38. Settings Tap this control to navigate to the screen where you can configure the washer according to your preferences or view information on how to remove stains eectively from your laundry. The screen provides the following options: Tap this control to change the LCD brightness level and sound volume of the washer. The LCD brightness level range is 5 levels from Level 1 to Level 5. The sound volume range is 5 levels from Mute to Level 4. For more information, refer to the “Controlling the sound volume” section on page 38 and the “Controlling the brightness level” section on page 39. Tap this control to change the current date and time of the washer and the LCD language. Tap this control to configure your Wi-Fi network, turn it on or o, view the health of your Wi-Fi network connectivity and/or update the networking software. After you have configured the washer’s Wi-Fi connection and turned it on, you can control some functions of your washer using your mobile phone if the Samsung Smart Washer/Dryer App is installed on your phone. Tap this control to view the information on how to remove various kinds of stains eectively from your laundry using your washer. For more information, refer to the “Using the Stain Guide” section on page 40. Tap this control to view the current average energy eciency of your washer, which is determined by your water and energy usage. For more information, refer to the “Viewing the Energy Eciency” section on page 41. Tap this control to control and save energy and money by adjusting the smart grid settings. For more information, refer to the “Using the Smart Grid” section on page 41. WF457ARG-03153A-07_EN.indd 322013-12-13 10:40:24Washing a load of laundry _33 02WASHINGALOADOFLAUNDRY Washing your laundry using the Cycle Selection screen Your new washer with its user friendly LCD control panel makes washing laundry easy. When you select a wash cycle, your washer will automatically select your last used temperature, spin speed, soil level, and extra cycles.

1. Turn the water supply on.

4. Load the articles loosely into the drum, without overfilling it.

6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate

7. In the CycleSelection screen as shown in

the figure on the right , select the appropriate cycle according to the type of laundry you are washing. You can choose from: eco Cold, Normal, Heavy Duty, Perm Press, Delicates/ Hand Wash, Active Wear, Bedding PLUS, DEEP STEAM, Stain Away, Sanitize, Wool, Quick Wash, Rinse + Spin, Spin Only, Pure Cycle, Specialty Cycles (Cooking & Dining, Gardening & Yard Work, Working & Everyday, Outdoors & Travel, Active Kids, Baby Care)

• Scroll down or up the Cycle pane and tap a cycle. The Option pane shows a description of the selected cycle and the currently selected cycle’s options. Tap the Description if you want to view the description of the selected cycle.

8. Tap the appropriate option button to control the Temperature, Spin Speed, Soil Level, Extras

• Some values of each option can be disabled. For information on the default factory setting and the selectable settings for each option, refer to the “Cycle chart” section on page 66.

• The Extras settings can only be turned On or O.

• The last used settings of the options are saved for that cycle. They are shown if the same cycle is selected again. Tap the left arrow if you want to return to the Cycle pane to select another cycle you want to use.

9. Press the Start/Pause button to start the

wash. The CycleStatus screen (shown on the right) is displayed on the LCD panel and shows the current status of the wash including the remaining time, the current phase of the cycle, and other available indicators and controls. Press the Power button to cancel the cycle and turn o your washer. WF457ARG-03153A-07_EN.indd 332013-12-13 10:40:2634_ Washing a load of laundry Washing a load of laundry Indicators on the Cycle Status screen SmartGridShows the status of the current smart grid level. AddGarmentThis icon is shown,when it is possible to add/remove laundry items. DoorLockedAppears when door is locked. Disappears when the door is unlocked. ChildLockThis is displayed with a checked icon when the Child Lock is enabled. Sound When the sound is Mute, the icon is

When the sound is On, the icon is

LightThis is displayed with a checked icon when the Light is turned on. Cancel Tap the Cancel button to cancel the cycle and return to the Cycle Selection screen. Add Garment option After you start a wash, the AddGarment ( ) icon appears at the bottom center of the Cycle Status screen whenever you can add or remove laundry items.

1. Press the Start/Pause button to unlock the door.

2. Wait until the DoorLocked (

) icon disappears from the bottom center of the Cycle Status screen. The door cannot be opened when the water is too HOT or the water level is too HIGH.

5. After closing the door, press the Start/Pause button to restart the wash.

When the cycle is finished: After the total cycle has finished, the Cycle complete screen appears (shown on right). It displays the cycle name and a summary of the phases, and allows you to start a new wash. If you do not touch a button to perform an operation for 5minutes, the Cyclecomplete screen is dimmed.

2. Remove the laundry.

WF457ARG-03153A-07_EN.indd 342013-12-13 10:40:26Washing a load of laundry _35 02WASHINGALOADOFLAUNDRY Using the My Cycle function The My Cycle function allows you to activate a custom wash (temperature, spin, soil level, and extra cycles) with a single button. You can save up to 3 My Cycles. Saving a My Cycle Follow the steps below to save your favourite custom wash as a My Cycle.

1. Tap the my Cycle button on the left side of

the CycleSelection screen. The selection expands showing three None buttons (None1 through None3) on the left of the screen. Refer to the illustration on the right.

2. Select a cycle and its options, such as the

temperature, spin speed, soil level and extra cycles, in the CycleSelection screen. In this example, we selected the Normal cycle, set the temperature to Warm, the spin speed to High, the soil level to Normal, and selected Extra Rinse and Steam as the extra cycles to add. See the “Cycle chart” section on page 66 for the available settings for each cycle.

3. Tap the Save As my Cycles button located at

the right center of the CycleSelection screen.

4. Select the My Cycle button you want to

overwrite with the selected cycle and its options. In this example, we selected My Cycle 1: None. When done, tap the Next button.

5. The Name your My Cycle screen appears.

Enter a name for the My Cycle. In this example, we entered “J’s Wash”. When done, tap the Save button.

6. A summary of the My Cycle that will overwrite

the existing cycle is displayed, as shown in the figure on the right . Tap the OK button. WF457ARG-03153A-07_EN.indd 352013-12-13 10:40:2736_ Washing a load of laundry Washing a load of laundry

7. The My Cycle “None1” is changed to “J’s

Wash” in the My Cycle list on the Cycle Selection screen. Starting a My Cycle Follow the steps below to start a My Cycle to wash your laundry.

1. Tap the My Cycle button in the CycleSelection screen. It will expand and show a list of 3

3. Press the Start/Pause button to start your wash.

Using the Delay Start function By activating the Delay Start function, you can set your washer to start your wash automatically at a specified later time. Activating Follow the steps below to activate the Delay Start function.

1. Tap the delay Start OFF ( ) button located

at the bottom right of the CycleSelection screen. The DelayStart screen is displayed.

2. Tap the up / down arrows to set a time.

3. If the Smart Grid function is available, you can allow your washer to find the most energy

ecient time (called the most eco-friendly time) to run your wash within a range of the time you set.

4. Tap the OK button to activate the Delay Start function with the options you set.

Tap the Cancel button to cancel the function.

5. You are returned to the CycleSelection screen. You will see that the delay Start OFF (

button has been changed to the delay Start ON ( ) button. Deactivating Follow the steps below to deactivate the Delay Start function.

1. Tap the delay Start ON (

) button located at the bottom right of the CycleSelection screen. The Delay Start function is deactivated and the button changes to the delay Start OFF ( ) button. WF457ARG-03153A-07_EN.indd 362013-12-13 10:40:28Washing a load of laundry _37 02WASHINGALOADOFLAUNDRY Using the Child Lock function The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen can’t be changed. Child Lock is a function to prevent children or the infirm from accidently operating the washer and injuring themselves. If a child enters the washer, the child may become trapped and suocate. Although the Child Lock function is activated, you must keep an eye on children nearby so that they do not operate your washer. Activating the Child Lock function Follow the steps below to activate the Child Lock function.

• Hold down the Child Lock button ( ) for 3 seconds. The Child Lock Function is activated with a pop-up window that displays “Child Lock ON”, and the button changes from ( ) to ( ). Deactivating the Child Lock function Follow the steps below to deactivate the Child Lock function.

1. Hold down The Child Lock button (

) for 3 seconds. The Child Lock Function is activated with the pop-up window displaying “Child Lock Pause”, and the button changes from ( ) to ( ). When the Child Lock state is Child Lock Pause, the Child Lock Pause ( ) button appears for 10 seconds. The Child Lock function will be activated again if the button is not held down for another 3 seconds.

2. Continue to hold down the Child Lock Pause (

) button for another 3 seconds. The Child Lock function is deactivated completely and the button changes to the Child Lock OFF ( ) button. When the Child Lock function is activated, only the Child Lock button works. The Child Lock function remains on even after the power is turned on and o or after you disconnect and reconnect the power cord. Opening the door by force can result in injury due to damage to the product. To add laundry when the Child Lock function is activated, you have to first pause or deactivate the Child Lock function. When the Child Lock function is activated, the screen does not change visually (no dimming or greying out). If you tap a button or any part of the screen, a tooltip reminder that the Child Lock function is turned on is displayed. CAUTIONWARNINGCAUTIONCAUTION WF457ARG-03153A-07_EN.indd 372013-12-13 10:40:2838_ Washing a load of laundry Washing a load of laundry Turning the Light On and O You can turn the light or o at any time. Turning the light on Tap the Light OFF ( ) button located at the bottom right of the Cycle Selection or Cycle Status screen. The light is turned on immediately and the button changes to the Light ON ( )button. Turning the light o Tap the Light ON ( ) button. The light is turned o immediately and the button changes to the Light OFF ( ) button. Controlling the sound volume You can control the volume of the sound interactions of your washer. There are 5 volume levels from Mute to Level 4. Even if the power is turned on and o repeatedly, the setting is retained. Follow the steps below to control the volume level.

1. Tap the Settings button in the CycleSelection

screen. The Settings screen is displayed.

3. Tap the Volume section.

4. Tap the desired volume level button.

5. Tap the OK button to apply the changes.

DEEP STEAM DEEP STEAM (Magic Steam) The Deep Steam feature boosts cleaning performance and loosens grime and dirt, providing superior cleaning results. For heavily soiled, colorfast garments, this cycle provides a high washing temperature and steam and is effective for cleaning stains. How DEEP STEAM works If you select steam, the steam acts at the most effective times for the detected amount of laundry, maximizing the effect of the steam, increasing the wash temperature, enhancing the Soak effect, and improving wash performance. Press Steam button to use the Steam Wash function. Steam Wash is available with the Normal, Heavy Duty, Bedding PLUS, Sanitize, Stain Away and Deep Steam cycles. For heavily soiled, colorfast garments, Steam Wash improves stain treatment and uses less water. WF457ARG-03153A-07_EN.indd 382013-12-13 10:40:29Washing a load of laundry _39 02WASHINGALOADOFLAUNDRY Washer takes small amounts of water in tub and Heater heats water into evaporation. To use the Steam function, perform the following steps:

3. Turn the Cycle Selector and select a steam cycle. (The Deep Steam cycle automatically

selects the Steam Wash function.)

4. Press the Steam button.

5. Add detergent into the dispenser tray for a wash, and add fabric softener up to the marked

: The washer automatically selects the optimal wash conditions by sensing the weight of the laundry. Steam may not necessarily be visible during the steam cycles. Steam may not be present during entire steam wash cycle.

Too much steam could damage clothing. Do not use steam with delicate fabrics such as wool, silk or easily discolored fabrics.

Steam may not be present during entire steam wash cycle.

Do not touch the door. The door surface can become very hot. Controlling the brightness level You can control the brightness level of the LCD panel. There are 5 brightness levels from Level 1 to Level 5. Even if the power is turned on and o repeatedly, the setting is retained. Follow the steps below to control the brightness level.

1. Tap the Settings button in the CycleSelection

screen. The Settings screen is displayed.

3. Tap the Brightness section.

4. Tap the desired brightness level button.

5. Tap the OK button to apply the changes.

CAUTION WF457ARG-03153A-07_EN.indd 392013-12-13 10:40:2940_ Washing a load of laundry Washing a load of laundry Using the Stain Guide The Stain guide provides information on how to clean stains on dierent types of clothing. Using the Stain Guide, you can easily learn how to eectively clean specific stains from your laundry. Follow the steps below to view the Stain Guide.

1. Tap the Settings button in the Cycle

2. Tap the Stain Guide button in the Settings

of contents of the stain guide is displayed as shown in the figure on the right . Tap the right arrow button to navigate to the next page of the table of contents. Tap the Dismiss button to return to the Settings screen.

4. Select the stain that you want information

about. For example, tap the Acids button.

5. The information on how to remove acid stains

from your laundry appears, as shown right.

6. Tap the Table of Contents button to return to

the TableofContents screen. Tap the left or right arrow to move the previous or next page. Tap the Dismiss button to return to the Settings screen. WF457ARG-03153A-07_EN.indd 402013-12-13 10:40:30Washing a load of laundry _41 02WASHINGALOADOFLAUNDRY Viewing the Energy Eciency You can view the overall energy eciency of your washing operations or behavior. Energy eciency is determined based on the combined usage of energy and water. Follow the steps below to view the overall energy eciency.

1. Tap the Settings button in the Cycle

2. Tap the Energy Eciency button in the

3. Tap the More... button to view the average

energy use for the most recent 12 months.

4. Tap the OK or Cancel button to return to the

Settings screen. Using the Smart Grid You can control and save energy and money using the Smart Grid function. You can view the current energy level on the smart grid, i.e. the current power state of your neighborhood in the Smart grid state section of the SmartGrid screen. There are 5 smart grid states or levels from Level 0 to Level 4. The higher the level, the closer the power state of your neighborhood is to a blackout. You can also view and change the override time, i.e. the limit time for using the smart grid service in a day in the Override section of the SmartGrid screen. The override time is the amount of time that your washer will continue to use energy before shutting down and preventing a neighborhood wide blackout. When the smart grid is available for your neighborhood, the Description, Smart grid state and Override sections are displayed in the SmartGrid screen. Viewing the current energy level Follow the steps below to view the current energy level on the smart grid.

1. Tap the Settings button at the bottom right of the CycleSelection screen.

The Settings screen is displayed.

2. Tap the Smart Grid button in the Settings screen.

3. Tap the Smart grid state section to view detailed information on the current energy level.

4. Tap the OK or Cancel button to return to the Settings screen.

WF457ARG-03153A-07_EN.indd 412013-12-13 10:40:3142_ Washing a load of laundry Washing a load of laundry Viewing and changing the override time Follow the steps below to view and change the override time.

1. Tap the Settings button at the bottom right of

the Cycle Selection screen.

2. The Settings screen is displayed.

3. Tap the Smart Grid button in the Settings

4. Tap the Override section.

5. Tap an override time.

6. Tap the OK button to apply the changes.

7. You are returned to the Settings screen.

When the smart grid is unavailable for your neighborhood, the description as shown in the figure on the right is displayed in the SmartGrid screen. When the Smart Grid function is unavailable because of a problem with your power utility, the description as shown in the figure on the right is displayed in the SmartGrid screen. ATC(AUTOTEMPERATURECONTROL) ATC is the control function that the washer controls water temperature with temperature sensor (thermistor). Because there are numerous water temperatures depending on the customer’s environments(cold areas, warm areas, various water temperature, settings of heater temperature, etcs), ATC function in our washer maintains the certain level of wash temperature to output the best washing performance at each cycle. If you select normal & heavy duty course, those courses are the regulation and UL course. Since new washer must reduce the amount of energy usage at first priority, customer will notice more cold water entering the washer. But This is Normal, not a problem. In those regulation course, Hot temperature is similar to acceptable adult bath-water temperature and warm temperature is similar to comfortable swimming-pool water temperature. If customer want to wash clothes in specific water temperature, customer should choose a dierent course at each temperature(Hot/Warm/Eco Warm) WF457ARG-03153A-07_EN.indd 422013-12-13 10:40:32Washing a load of laundry _43 02WASHINGALOADOFLAUNDRY DETERGENTUSE Your washer is designed to use high eciency (HE) detergents.

• For best cleaning results, use a high eciency detergent such as Tide HE, Wisk HE, Cheer HE or Gain HE*. High eciency detergents contain sud suppressors that reduce or eliminate suds. When fewer suds are produced, the load tumbles more eciently and cleaning is maximized. Regular detergent is not recommended. Please use HE detergents only. Reducing the amount of detergent may reduce the cleaning quality. It is important to pre–treat stains, sort carefully by color and soil level, and avoid overloading.

• The brand names are trademarks of their respective manufacturers. USINGTHEDETERGENTDRAWER Automatic dispenser Your washer has separate compartments for dispensing detergent and color-safe bleach, chlorine bleach, and fabric softener. Add all laundry additives to their respective compartments before starting your washer. The automatic dispenser MUST ALWAYS be in place before starting your washer. DO NOT open the automatic dispenser when your washer is running. Usage Tips:

• Never exceed the manufacturer’s recommendations when adding detergent.

• This compartment holds liquid detergent for the main wash cycle, which is added to the load at the beginning of the cycle. When using powdered detergent, remove the Liquid Detergent holder compartment from the detergent drawer. The washer will not dispense powdered detergent from the Liquid Detergent holder. Before using powdered detergent, remove the Detegent Liquid holder from the compartment. Powdered detergent will not be dispensed from the Detegent Liquid holder. Liquiddetergent compartment Detergent compartment

1. Pour the recommended amount of laundry detergent directly into the detergent compartment

before starting your washer.

2. If you are using color-safe bleach, add it with the detergent to the detergent compartment.

When adding color-safe bleach with detergent, it is best if both laundry products are in the same form – granular or liquid. WARNING WF457ARG-03153A-07_EN.indd 432013-12-13 10:40:3244_ Washing a load of laundry Washing a load of laundry Pre wash compartment When using the Pre Wash option, detergent should be added to both the Pre Wash compartment and the detergent compartment. The detergent will automatically be dispensed during the Pre Wash. If high eciency (HE) detergent is used, add 1/3 the recommended amount to the Pre Wash compartment and 2/3 the recommended amount to the detergent compartment. Bleach compartment (Liquid chlorine bleach only)

1. Add chlorine bleach to the bleach compartment.

DO NOT exceed the MAX FILL line.

2. Avoid splashing or over–filling the compartment.

3. Your washer automatically dispenses bleach into the tub at

the appropriate time.

4. The dispenser automatically dilutes liquid chlorine bleach

before it reaches the wash load.

onto the load or into the tub. It is a powerful chemical and can cause fabric damage such as weakening of the fibers or color loss if not used properly.

the washer for a period of time after you have added detergent or applied stain remover or pre-treatment, the laundry may be discolored.

to the drum prior to adding laundry.

that the oxi-type boosters or color-safe bleach has completely entered the hole of the drum.

type boosters or powdered color-safe bleach at the same time, it is more eective putting them in together and removing the liquid detergent holder from the detergent compartment. FabricSoftenercompartment Bleachcompartment Fabric softener compartment

1. Pour the recommended amount of liquid fabric softener into the softener compartment.

For smaller loads, use less than one capful.

2. Dilute the fabric softener with water until it reaches the MAX FILL line in the compartment.

3. The dispenser automatically releases the liquid fabric softener at the proper time during the

not add fabric softener at the appropriate time. Use the detergent Compartment.

the water suciently.

• The brand names are trademarks of their respective manufacturers. WF457ARG-03153A-07_EN.indd 442013-12-13 10:40:32Using your mobile phone _45 03USINGYOURMOBILEPHONE Using your mobile phone You can receive notifications and control your washer on your mobile phone. To do this, you need to do the following.

1. Configure the Wi-Fi settings of your washer and connect the washer to your network.

2. Turn on the Wi-Fi networking function of your washer.

3. Download, install, and then run the mobile app, Samsung Smart Washer/Dryer App

4. Use the mobile app, Samsung Smart Washer/Dryer App.

No wired or wireless router (AP) is provided when you purchase your washer. The washer supports the Wi-Fi encryption protocols, WEP, TKIP and TKIP AES. It does not support connecting to a wired or wireless router (AP) that uses a Wi-Fi encryption protocol other than these.

Wi-Fi connections of other previously connected units might be disconnected.

network connectivity may be degraded.

concrete, the network connectivity may be degraded.

connectivity may be degraded due to interference.

This product does not contain a wireless router. CONFIGURINGYOURWASHER’SNETWORKSETTINGSAND CONNECTINGTOYOURNETWORK To configure your washer’s Wi-Fi settings and connect your washer to your network, follow the procedures below. Configuring the IP address settings Follow the procedure below to configure the IP address settings of your washer for a Wi-Fi network.

1. Tap the Settings button in the Cycle

2. Tap the Network menu in the Settings screen.

3. Tap the Wi-Fi network section.

4. Tap the Configure button.

5. Tap the IP Address button next to the network

you want to configure.

6. Tap the Automatic button to have your washer

configure the IP address settings automatically. Then proceed to step 11.

7. To configure the IP address settings manually, tap the User Config button.

8. Tap the IP address field.

9. Enter an IP address and then tap the OK button.

10. Repeat steps 8 and 9 for the Subnet mask, Gateway, and DNS fields.

11. Tap the OK button in the Settings screen.

CAUTIONWF457ARG-03153A-07_EN.indd 452013-12-13 10:40:3346_ Using your mobile phone Using your mobile phone Connecting your washer to the network Follow the procedure below to connect your washer to a Wi-Fi network.

1. Tap the Settings button in the CycleSelection screen.

2. Tap the Network menu in the Settings screen.

3. Tap the Wi-Fi network section.

4. Tap the Configure button.

5. Tap the name of the network to which you want to connect your washer.

6. Enter your network password, and then tap the OK button.

7. The washer begins the connection process. The ConnecttoWi-Fi screen is displayed to

show the search progress.

8. If the washer connects to the network, the “Connection has been successfully established”

message is displayed for 1 second. Then, the NetworkList screen re-appears with a check mark to the left of the selected network.

9. If the washer cannot connect to the network, the “Connection failed” message is displayed.

To retry the connection, tap the Retry button. To return to the NetworkList screen, tap the Cancel or OK button. TURNINGONYOURWASHER’SWI-FINETWORKINGFUNCTION Follow the procedures below to turn on your washer’s Wi-Fi networking function.

1. Tap the Settings button in the Cycle Selection

2. Tap the Network menu in the Settings screen.

3. Tap the Wi-Fi status section.

• When a user tries to check if updates are available, the function is executed by selecting the update function.

• This function does not work in the normal state.

• If a user runs the update function, the LCD shows the update progress bar and announces that the product will be restarted when the update is completed.

• If the power cord of the product is unplugged, the AP power is cut, the download fails or the user presses the Cancel button while the update file is being downloaded, the file is discarded. The version prior to the update is maintained.

• If the download progress of the update file does not change for 10 minutes, a connection error message is displayed. When a user runs the update function, and the file is already up-to-date (if the FIRMWARE CODE is the same), a message stating this is displayed. WF457ARG-03153A-07_EN.indd 472013-12-13 10:40:3448_ Using your mobile phone Using your mobile phone DOWNLOADINGANDRUNNINGTHEMOBILEAPP,SAMSUNG SMARTWASHER/DRYERAPP Follow the procedures below to download and run the mobile app, Samsung Smart Washer/Dryer App.

1. Download the Samsung Smart Washer/Dryer App into your mobile phone from the

Android market or Apple App Store. You can skip this step if the app has been already downloaded into your mobile phone.

2. Tap the Samsung Smart Washer/Dryer App icon on

your mobile phone to run the app. The initial screen is displayed.

3. The Home screen is displayed. It shows that your mobile

phone is not yet connected to your washer.

4. Tap the Indoor control or Outdoor control.

6. The progress screen is displayed while the

Samsung Smart Washer/dryer App tries to connect to your washer. Connecting may take a minute or two.

7. When the connection is established, the screen shown at

right appears. WF457ARG-03153A-07_EN.indd 492013-12-13 10:40:3550_ Using your mobile phone Using your mobile phone USINGTHEMOBILEAPP After your washer has been connected, you can perform the following operations using the Samsung Smart Washer/Dryer App.

• Disconnect the connection

• View and edit your washer’s profile

• Start a new wash (including receiving notifications and controlling your washer) Disconnecting the connection Follow the procedure below to disconnect the connection to your washer.

1. Tab the disconnect button.

WF457ARG-03153A-07_EN.indd 502013-12-13 10:40:35Using your mobile phone _51 03USINGYOURMOBILEPHONE Starting a new wash Follow the procedure below to start a new wash from your mobile app.

1. The Choose cycle screen is displayed.

In your washer, you must tap the Smart Control button in the Cycle Selection screen to turn on the Smart Control function.

2. Select the cycle you want, and then top the Start button.

3. The cycle status including cycle progress and estimated

finish time are shown on the screen. Tap the Pause button to pause the cycle. WF457ARG-03153A-07_EN.indd 512013-12-13 10:40:3652_ Using your mobile phone Using your mobile phone

4. When the cycle is completed, the message “Cycle

complete” and a summary review of all the phases are shown.

5. Tap the Confirm button to return to the Home screen.

Registering your washer

2. Enter the User ID and Password to log in.

If you don’t have an account, press “Create a Samsung account” and fill in the form to become a member.

3. Select “My page” “My page”.

4. Select “Add device”.

5. After entering the MAC written from

following instruction.

6. Click the “Certify device”.

comes on, click the “Ok”. If the washer you are registering is already registered by other users, a window will come on asking whether you want to delete the usage authority of the existing users, or not.

9. After the registration of the washer is

completed, you can check the registered washer on the device information list. WF457ARG-03153A-07_EN.indd 532013-12-13 10:40:3754_ Using your mobile phone Using your mobile phone OVERVIEWFORWI-FISETTINGSANDAPCONNECTION The first screen after booting up The first screen after entering the setup Select this to turn the Wi-Fi on Select ON Select this to select the AP Select this to search for the AP Searching for APs Select an AP (Refer to the MAC address) Enter the password for the AP and select OK Connecting to the AP When the connection with the AP is established, √ is displayed The connection status information is displayed The Wi-Fi connection status information is displayed at the top right of the Home screen as an icon. Move to the Home screen Home screen WF457ARG-03153A-07_EN.indd 542013-12-13 10:40:40Maintaining your washer _55 04MAINTAININGYOURWASHER Maintaining your washer CLEANINGTHEEXTERIOR Turn o the water faucets after finishing the day’s washing. This will shut o the water supply to your washer and prevent the unlikely possibility of damage from escaping water. Leave the door open to allow the inside of your washer to dry out. Use a soft cloth to wipe up all detergent, bleach or other spills as they occur. Cleaning the following is recommended: ControlPanelClean with a soft, damp cloth. Do not use abrasive powder or cleaning pads. Do not spray cleaner directly on the panel. CabinetClean with soap and water. CLEANINGTHEINTERIOR Clean the interior of your washer periodically to remove any dirt, soil, odor, mold, mildew, or bacterial residue that may remain in your washer as a result of washing clothes. Failure to follow these instructions may result in unpleasant conditions, including odors and/or permanent stains on your washer or laundry. Hard water deposits may be removed, if needed. Use a cleaner labeled “Washer safe”. CLEANINGTHEDISPENSERS The automatic dispenser may need to be cleaned periodically due to remove laundry additive buildup.

2. Remove the siphon cap from the fabric softener and bleach

3. Wash all of the parts under running water.

4. Clean the dispenser recess with a soft brush.

5. Reinsert the siphon cap and push it firmly into place.

6. Push the Liquid Detergent holder back into place.

7. Run a Rinse+Spin cycle without any load in your washer.

Siphoncap STORINGYOURWASHER Washers can be damaged if water is not removed from hoses and internal components before storage. Prepare your washer for storage as follows:

• Select the Quick Wash cycle and add bleach to the automatic dispenser. Run your washer through the cycle without a load.

• Turn the water faucets o and disconnect the inlet hoses.

• Unplug your washer from the electrical outlet and leave your washer door open to let air circulate inside the tumbler.

• If you store your washer in below freezing temperatures, make sure you allow time for any leftover water in your washer to thaw before use. WF457ARG-03153A-07_EN.indd 552013-12-13 10:40:4156_ Maintaining your washer Maintaining your washer

We recommend cleaning the debris filter when water does not drain well or the “nd” error message is displayed.

1. Open the filter cover by pressing and then pulling the

handle of the filter cover with your finger.

2. Holding the drain cap, pull the drain tube that is hooked

onto the guide hook to the front. Do not pull the drain tube with excessive force.

3. Place a bowl under the washer to catch any remaining

water. Then, hold the drain tube with one hand, and turn the emergency drain cap counter clockwise with the other hand to separate it from the drain tube.

4. Drain the remaining water completely.

5. Turn the debris cap counterclockwise, and then pull the

debris cap and debris filter assembly out of the washer.

6. Wash any dirt or other material from the debris filter.

7. Make sure the drain pump propeller behind the debris filter

is not blocked. WF457ARG-03153A-07_EN.indd 562013-12-13 10:40:42Maintaining your washer _57 04MAINTAININGYOURWASHER

8. When you have finished cleaning the filter, insert the debris

cap and filter assembly back into the washer. Turn the debris filter cap clockwise until the indicator on the debris filter cap is in the 12 o’clock position, pointing to the indicator on the washer.

9. Re-attach the emergency drain cap to the drain tube, and

then hook the tube onto the hook guide.

10. Re-install the filter cover.

CLEANINGTHEDOORSEAL/BELLOW

1. Open the washer door and remove any clothing or items from the washer.

2. Inspect the gray colored seal/bellow between the door

opening and the basket for stained areas. Pull back the seal/bellow to inspect all areas under the seal/bellow and check for foreign objects. Seal/Bellow

3. If stained areas are found, wipe these seal/bellow areas using, using the procedures below:

1) Carefully combine ¾ cup (177 mL) of liquid chlorine bleach and 1 gal. (3.8 L) of warm tap

2) Wipe the seal/bellow area with the diluted solution using a damp cloth.

3) Let it stand for 5 minutes.

4) Wipe the area thoroughly with a dry cloth and let the washer interior air dry with the door

• Refertothebleachmanufacturer’sinstructionsforproperuse. PRESERVINGTHETOPCOVERANDTHEFRONTFRAME Do not place any heavy or sharp objects or detergent boxes on the washer. They can scratch or damage the top cover. Keep them in the pedestal (if purchased) or in a separate storage box. Since the entire washer has a high-gloss finish, the surface can be scratched or damaged. Avoid scratching or damaging the surface when using the washer. WF457ARG-03153A-07_EN.indd 572013-12-13 10:40:4258_ Maintaining your washer Maintaining your washer

Pure Cycle is a self-cleaning cycle that removes mold that may occur inside the washer.

1. Press the Power button.

2. Select the Pure Cycle.

Once the Pure Cycle is chosen, the only function that can be set is Delay Start.

laundry or a problem with the washer.

(When using a powder-type cleaning agent , remove the liquid detergent compartment.)

When this remove the laundry from the washer, turn the power on, and clean the drum by running the Pure Cycle.

again after two washes. Not running the Pure Cycle at this point will not cause a problem with the washer.

frequency may dier depending on the number of times the washer is used. CAUTIONWF457ARG-03153A-07_EN.indd 582013-12-13 10:40:42Troubleshooting _59 05TROUBLESHOOTING Troubleshooting CHECKTHESEPOINTSIFYOURWASHER… PROblEm SOlUTION Willnotstart.•Make sure the door is firmly closed.

• Make sure your washer is plugged in.

• Make sure the water faucets are open.

• Make sure to press the Start/Pause button to start your washer.

• Make sure Child Lock is not activated; see page 37.

• Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a quick drain.

• Check the fuse or reset the circuit breaker Hasnowaterornotenough water.

• Turn both faucets on fully.

• Make sure the door is tightly closed.

• Straighten the water inlet hoses.

• Disconnect the hoses and clean the hose filter screens. The hose filter screens may be clogged.

• Open and close the door, then press the Start/Pause Button. Hasdetergentremaining intheautomaticdispenser afterthewashcycleis complete.

• Make sure your washer is running with sucient water pressure.

• Make sure the Detergent Selector dial is in the upper position when using granular detergent. Vibratesoristoonoisy.•Make sure your washer is set on a level surface. If the surface is not level, adjust your washer’s feet to level the appliance.

• Make sure that the shipping bolts are removed.

• Make sure your washer is not touching any other object.

• Make sure the laundry load is balanced. Stops•Plug the power cord into a live electrical outlet.

• Check the fuse or reset the circuit breaker.

• Close the door and press the Start/Pause Button to start your washer. For your safety, your washer will not tumble or spin unless the door is closed.

• Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a quick drain.

• There may be a pause or soak period in the cycle. Wait briefly to see if it starts.

• Check the screens on the inlet hoses at the faucets for obstructions. Clean the screens periodically. WF457ARG-03153A-07_EN.indd 592013-12-13 10:40:4260_ Troubleshooting Troubleshooting PROblEm SOlUTION Fillswiththewrong temperaturewater.

• Turn both faucets on fully.

• Make sure the temperature selection is correct.

• Make sure the hoses are connected to the correct faucets. Flush water lines.

• Checkthewaterheater.Itshouldbesettodeliveraminimum120°F (49°C)hotwateratthetap.Alsocheckthewaterheatercapacityand recovery rate.

• Disconnect the hoses and clean the screens. The hose filter screens may be plugged.

• As your washer is filling, the water temperature may change as the automatic temperature control feature checks the incoming water temperature. This is normal.

• While your washer is filling, you may notice just hot or just cold water going through the dispenser when the cold or warm wash temperature is selected. This is a normal function of the automatic temperature control feature as your washer determines the temperature of the water. Doorislockedorwillnot open.

• Press the Start/Pause Button to stop your washer.

• Your washer door will remain locked during the heating portion of the Sanitize Cycle

• It may take a few moments for the door lock mechanism to disengage. Doesnotdrainand/orspin.

• Check the fuse or reset the circuit breaker.

• Straighten the drain hoses. Eliminate bent hoses. If there is a drain restriction, contact the customer service center.

• Close the door and press the Start/Pause Button. For your safety, your washer will not tumble or spin unless the door is closed.

• Make sure the debris filter is not clogged. Loadistoowetattheend ofthecycle.

• Use the High or Extra High spin speed.

• Use high eciency detergent to reduce over–sudsing.

• The load is too small. Very small loads (one or two items) may become unbalanced and not spin out completely. Leakswater.

• Make sure the door is firmly closed.

• Make sure all hose connections are tight.

• Make sure the end of the drain hose is correctly inserted and secured to the drainage system.

• Use high eciency detergent to prevent over–sudsing. Hasexcessivesuds.

• Use high eciency detergent to prevent over-sudsing.

• Reduce the detergent amount for soft water, small or lightly soiled loads.

• Non-HE detergent is NOT recommended. Hasanodor.

• Excessive suds collect in nooks and crannies and can cause foul odors.

• Run cleansing cycles to sanitize the machine periodically. (Silver Care or Sanitize Cycle or Pure Cycle)

• Clean the door seal (Diaphragm).

• Dry the interior of your washer after the total cycle has finished. WF457ARG-03153A-07_EN.indd 602013-12-13 10:40:43Troubleshooting _61 05TROUBLESHOOTING INFORMATIONCODES Information codes may be displayed to help you better understand what is occurring with your washer. Samsung’s Smart Care, an automatic error-monitoring system, detects and diagnoses problems at an early stage and provides a quick and easy solution through LCD navigation. When your washer has a problem, the notification screen will show the information and solution to help you better understand what is occurring with your washer and how to solve the problem. ERROR COdE mEANING & SOlUTION

An unbalanced load that prevents your washer from spinning. Redistribute the load, and press the Start/Pause button.

The door is open when the washer is running. Close the door tightly and restart the cycle. If the code reappears, contact customer service.

Your washer failed to lock the door. Close the door tightly and restart the cycle. If the code reappears, contact customer service.

A water temperature control problem. (Heater control problem) Contact customer service.

Your washer has tried to fill with water, but has not reached the proper water level. Contact customer service.

The door will not unlock. Make sure the door is firmly closed. Press the Power button to turn o your washer, then turn it on again. If the code reappears, contact customer service.

Your washer is not draining. This can also mean that the unit senses a small clog while draining.

1. Turn o the unit for 10 seconds and then turn it on again.

2. Select the Spin Only cycle.

3. Press the Start/Pause to drain the water.

If it still does not drain, contact for service.

Your washer has tried to fill but was unsuccessful. Make sure the water faucets are open all the way. Check for bent hoses. Check the inlet screens on the hoses. If you are using a Flood Safety Device, please remove the device and connect the water hoses directly to the unit. Check if the hot water supply hose is connected. You must connect the hot water supply hose because hot water is supplied by the Auto Temperature Control (A.T.C.). When washer displays “nF”, washer do draining for 3 minutes. At this time, Power button is invalid nF1 The hot/cold water hose connection is not correct. Please connect the hot/cold water hose connection correctly.

A fault is detected in the water level sensor. Contact customer service. WF457ARG-03153A-07_EN.indd 612013-12-13 10:40:4362_ Troubleshooting Troubleshooting ERROR COdE mEANING & SOlUTION

The Water Level sensor is not working properly. Contact customer service. The washer will stop operating temporarily until the water is completely drained. It takes a maximum of 3 minutes for the water to drain completely.

A jammed key. Contact customer service.

A temperature sensor problem. Restart the cycle. If the code reappears, contact customer service.

A motor problem. Restart the cycle. If the code reappears, contact customer service.

High/Low voltage detected. Restart the cycle. If the code reappears, contact customer service.

A communication error between the SUB PBA and the MAIN PBA Contact customer service. AE4 A communication error between the Wi-Fi Module and the MAIN PBA Contact customer service. AE3 A communication error between the DR MODEM and the MAIN PBA Contact customer service. AE5 A communication error between the LCD Module and the MAIN PBA Contact customer service.

A MEMS sensor problem. Contact customer service. SF1 SF2 SF3 A system error Contact customer service. SUdS Too many suds are detected during the wash session. The unit is put on hold until the amount of suds have been reduced. The unit will then go back to operating. When it finishes washing, the “End” and “SUdS” codes will blink in turn. For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG) WF457ARG-03153A-07_EN.indd 622013-12-13 10:40:43Troubleshooting _63 05TROUBLESHOOTING NETWORKSETUPQ&A QUESTION ANSWER The washer or dryer is not found in the smartphone app.

• Check the power status of the AP.

• Check if the smartphone is connected with Wi-Fi.

• Check if the Wi-Fi function of the washer or dryer is turned on.

• To refresh the screen, press “Configure” again.

• If the AP is installed too far away from the washer or dryer, the strength of the Wi-Fi signal may weak. In this case, move the AP closer to the washer or dryer. The AP is not found on the washer or dryer.

• Check the power status of the AP.

• Check if the Wi-Fi function of the washer or dryer is turned on.

• To refresh the screen, press “Configure” again.

• If the AP is installed too far away from the washer or dryer, the strength of the Wi-Fi signal may weak. In this case, move the AP closer to the washer or dryer. Ensure that the number of the displayed antenna bars are at least 3.

• Since if the performance of the AP is low, it may not be found by the washer or dryer, use high performance AP if available. There are more than one washer or dryer in the house. Do I have to install an AP for each of them?

• You can install only one AP.

• I you want to one AP for each of the washer and dryer, select the corresponding AP for each of the products in the “Smart Washer” app.

• When both washer and dryer are installed, they can be controlled through one AP. Which AP is better? •Since the washer or dryer is controlled through the AP from the inside or outside of the house, high performance AP is recommended.

• Use an AP with Wi-Fi certification mark.

• Since an AP with 2 or more antennas provides better performance, purchse and use the AP. How can I check if the AP is out of order?

• Connect to the AP on a smartphone and check if you can connect to the Internet. If you can connect to the Internet, the AP is normal.

• Check if the LED of the AP is blinking. If all the LEDs are turned o, it indicates that the power is turned o.

• If the AP doesn’t seem to be working properly, request after-sales service. The customer does not have a PC. Can the customer can use the indoor and outdoor control feature?

• If the Internet can be accessed inside of the house, the feature is available. However, you have to sign up the web site and resgister the product. How many users can control a washer or dryer?

• Only if the “Smart Washer” app is authenticated, multiple users can control the washer or dryer. WF457ARG-03153A-07_EN.indd 632013-12-13 10:40:4364_ Troubleshooting Troubleshooting QUESTION ANSWER Where are the proper place to install a washer or dryer?

• Since a washer or dryer is heavy and connected with water, it should be installed in the proper place. Installing the AP near the washer or dryer is recommended. You can check the signal strength through the setup screen of the washer or dryer or a smartphone.

• Since the performance is seriously aected by a door or steel wall, install the product in an open place. If there is door in front of the installed product, open the door when using the product.

• Do not place an object maden with steel or glass in front of the front LCD of the washer since it blocks the radio signal.

• Note that the radio signal may be weaken or interfered and the communication with the smartphone may fail when a microwave oven is used in the house.

• Install the washer or dryer so that the front of the product faces the AP if available. How can I connect the washer or dryer with a smartphone stably?

• When the signal strength that is displayed on the LCD of the washer or dryer is weak, the control may fail. Check the mark as follows or measure the signal strength.

• At least 3 antenna bars should be displayed on the LCD of the washer or dryer.

• At least 3 antenna bars for the Wi-Fi connection should be displayed on the smartphone.

• When the signal strength is measured with a smartphone app that shows the Wi-Fi signal strength, the signal strength should be stronger than -65 dBm. (E.g. -60 dBm and -50 dBm are stronger than -65 dBm.) What should I have to do when the number of the antenna bars that are displayed on the LCD of the washer or dryer is 1?

• When the signal strength that is displayed on the LCD of the washer or dryer is weak, the control may fail. In this case, take the following measures for normal operation.

• Move the AP closer to the washer or dryer. (At least 3 antenna bars should be dislayed in the network setup of the washer for proper operation.)

• Since old AP may provide lower performance, use new one if available.

• Stand the antenna of the AP if available so that the radio signal is more easily propagated. WF457ARG-03153A-07_EN.indd 642013-12-13 10:40:43Appendix _65 06APPENDIX Appendix FABRICCARECHART The following symbols provide garment care directions. The Clothing care labels include symbols for washing, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow the care label directions to maximize garment life and reduce laundering problems. Wash Cycle Special Instructions Warning Symbols for Laundering Normal Line Dry/ Hang to Dry Do Not Wash Permanent Press / Wrinkle Resistant / Wrinkle Control Drip Dry Do Not Wring Gentle/Delicates Dry Flat Do Not Bleach Hand Wash Heat Setting Do Not Tumble Dry Water Temperature** High No Steam (added to iron) Hot Medium Do Not Iron Warm Low Dry clean Cold Any Heat Dry Clean Bleach No Heat/Air Do Not Dry Clean Any Bleach (when needed) Iron-Dry or Steam Temperatures Line Dry/ Hang to Dry Only Non-Chlorine (color-safe) Bleach (when needed) High Drip Dry Tumble Dry Cycle Medium Dry Flat Normal Low For machine-washable wool. Loads should be under 8 pounds. Permanent Press/ Wrinkle Resistant/ Wrinkle Control Gentle/ Delicates ** The dot symbols represent the appropriate wash water temperatures for various items. The temperature

and eective cleaning.) The washer may not ensure these temperatures because the actual water temperatures entering your washer are dependent on water heater settings and regional water supply temperatures. For example, cold water entering the home in the northern states during winter may be 40

adjusted by selecting a warm setting, adding some hot water to the MAX FILL line or using your washer’s heating option, if available. WF457ARG-03153A-07_EN.indd 652013-12-13 10:40:4366_ Appendix Appendix CYCLECHART Use this chart to set the best cycle and options for your laundry. (: Factory setting, : Selectable, : Not available) Course Functions Temp. Spin Extra Hot Hot Warm Eco Warm Cold Extra High High Medium Low No Spin Normal

Cycle Pre Wash Delay Start Steam Extra Heavy (Heavy) Heavy

• Your washer is manufactured from recyclable materials. If you decide to dispose of it, please observe your local waste disposal regulations. Cut o the power cord so that the appliance cannot be connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance.

• Do not exceed the detergent quantities recommended in the detergent manufacturers’ instructions.

• Use stain removal products and bleaches before the wash cycle only when necessary.

• Save water and electricity by only washing full loads (the exact amount depends upon the program used). DECLARATIONOFCONFORMITY This appliance complies with UL2157. SPECIFICATIONS TyPE FRONT lOAdING WASHER DIMENSIONSDivInches(mm) A. Height-Overall 39” (990) B. Width 27” (686) C.Depthwithdooropen90°51.2” (1300) D. Depth 34.1” (865)

WASHING AND HEATING 120 V 1150 W

SPINREVOLUTIONSWF457* 1300 rpm WF457ARG-03153A-07_EN.indd 682013-12-13 10:40:44Warranty _69 07WARRANTY Warranty (U.S.A) SAMSUNGWASHER lImITEd WARRANTy TO ORIGINAl PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) year part and labor, Two (2) years Control Board Parts, Three (3) years stainless tub part, Ten (10) years washing motor part This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. SAMSUNG will provide in-home service during the warranty period at no charge, subject to availability within the contiguous United States. In-home service is not available in all areas. To receive in-home service, product must be unobstructed and accessible to the service agent. If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following: damage that occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal and reinstallation; problems caused by pest infestations. This limited warranty does not cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant uninterrupted or error-free operation of the product. WF457ARG-03153A-07_EN.indd 692013-12-13 10:40:4470_ Warranty Warranty EXCEPT AS SET FORTH HEREIN, THERE ARE NO WARRANTIES ON THIS PRODUCT EITHER EXPRESS OR IMPLIED, AND SAMSUNG DISCLAIMS ALL WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE, OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from state to state. To obtain warranty service, please contact SAMSUNG at: Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660 1-800-SAMSUNG (726-7864) www.samsung.com Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. WF457ARG-03153A-07_EN.indd 702013-12-13 10:40:44Warranty _71 07WARRANTY Warranty (CANADA) SAMSUNGWASHER lImITEd WARRANTy TO ORIGINAl PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) year part and labor, Ten (10) years washing motor part This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the Canada. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. SAMSUNG will provide in-home service during the warranty period at no charge, subject to availability within the Canada. In-home service is not available in all areas. To receive in-home service, product must be unobstructed and accessible to the service agent. If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following: damage that occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal and reinstallation; problems caused by pest infestations. This limited warranty does not cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant uninterrupted or error-free operation of the product. WF457ARG-03153A-07_EN.indd 712013-12-13 10:40:4472_ Warranty Warranty EXCEPT AS SET FORTH HEREIN, THERE ARE NO WARRANTIES ON THIS PRODUCT EITHER EXPRESS OR IMPLIED, AND SAMSUNG DISCLAIMS ALL WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE, OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from province to province. To obtain warranty service, please contact SAMSUNG at: Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada 1-800-SAMSUNG (726-7864) www.samsung.com/ca www.samsung.com/ca_fr (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. WF457ARG-03153A-07_EN.indd 722013-12-13 10:40:45Memo WF457ARG-03153A-07_EN.indd 732013-12-13 10:40:45Memo WF457ARG-03153A-07_EN.indd 742013-12-13 10:40:45Memo WF457ARG-03153A-07_EN.indd 752013-12-13 10:40:45QUESTIONS OR COMMENTS? COUNTRy CAll OR VISIT US ONlINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com MEXICO 01-800-SAMSUNG (726-7864) www.samsung.com CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca www.samsung.com/ca_fr (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. Code No. DC68-03153A-07_EN bit.ly/samsungwashers WF457ARG-03153A-07_EN.indd 762013-12-13 10:40:45Lave-linge manuel d'utilisation Un monde de possibilités Nous vous remercions d'avoir choisi ce produit Samsung. Si vous souhaitez recevoir un service plus complet ou des accessoires, enregistrez votre produit à l'adresse ci-dessous ou contactez www.samsung.com/register 1-800-SAMSUNG (726-7864) WF457ARG* Ce manuel a été imprimé sur du papier 100% recyclé. WF457ARG-03153A-07_CFR.indd 12013-12-13 10:39:462_ Caractéristiques principales de votre nouveau lave-linge Smart PowerFoam™ Caractéristiques principales de votre nouveau lave-linge Smart PowerFoam™