43UK6470PLC - TV LG - Free user manual and instructions

USER MANUAL 43UK6470PLC LG

(All Settings) icon and select by pressing the Wheel (OK) button on the remote. All Settings

Wired Connection (Ethernet) or Wi-Fi Connection. Picture NETWORK TV Name [LG] WebOS TVWired Connection (Ethernet)Not ConnectedWi-Fi ConnectionNot ConnectedWi-Fi DirectLG Connect AppsSoundProgrammesNetworkGeneralSafetyAccessibility 4 The device automatically tries to connect to the network available (wired network first). When you select the Wi-Fi Connection, the network list available is displayed. Choose the network you wish to use. Picture WI-FI CONNECTION Network /SoundProgrammesNetworkGeneralSafetyAccessibilityꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Add a Hidden Wireless NetworkConnect via WPS PBCConnect via WPS PINAdvanced Wi-Fi Settings

For wireless AP (Router) that have the symbol, you need to enter the security key. 5 If the connection is successful, the "Connected to Internet" is displayed.

You can check the status of connection in Advanced Wi-Fi settings.

• Image shown may differ from your TV.

• Image shown on a PC or mobile phone may vary depending on the OS(Operating System).

• App icon positions may vary on the platform, depending on the software version. SMART TV Quick Setup Guide www.lg.comTroubleshooting Network Problems 1 Press the (Home) button on the remote to access the Home menu. Point the (Settings) icon and select by pressing the Wheel (OK) button on the remote. 2 Point the

(All Settings) icon and select by pressing the Wheel (OK) button on the remote. All Settings

Wired Connection (Ethernet) or Wi-Fi Connection

Advanced Wi-Fi Settings. Picture NETWORK TV Name [LG] WebOS TVWired Connection (Ethernet)Not ConnectedWi-Fi ConnectionNot ConnectedWi-Fi DirectLG Connect AppsSoundProgrammesNetworkGeneralSafetyAccessibility Picture WI-FI CONNECTION Network /SoundProgrammesNetworkGeneralSafetyAccessibilityꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Add a Hidden Wireless NetworkConnect via WPS PBCConnect via WPS PINAdvanced Wi-Fi Settings Follow the instructions below that correlate to your network status. Check the TV or the AP (Router). When X appears next to TV:

Check the connection status of the TV, AP (Router).

Power off and power on the TV, AP (Router).

If you are using a static IP, enter the IP directly.

Contact internet service provider or AP (Router) company. Check the AP (Router) or consult your Internet service provider. When X appears next to Gateway:

Unplug the power cord of the AP (Router) and try to connect after 5 seconds.

Initialize (Reset) the AP (Router).

Contact internet service provider or AP (Router) company. When X appears next to DNS:

Unplug the power cord of the AP (Router) and try to connect after 5 seconds.

Initialize (Reset) the AP (Router).

Check that the MAC address of the TV/AP (Router) is registered with your Internet service provider. (The MAC address displayed on the right pane of the network status window should be registered with your Internet service provider.)

Check the AP (Router) manufacturer’s website to make sure your router has the latest firmware version installed.SmartShare PC SW Installing & Setting 1 Install the SmartShare PC SW programme on your PC. 2 Go to www.lg.com. Then, select your region. 3 Select SUPPORT. Then, select Drivers & Software, SOFTWARE UPDATE or Software & Firmware. 4 Search for your model. Then, select SmartShare PC SW. 5 You can run the programme when installation is complete. NOTE

SmartShare service is only available if TV and other devices are connected via a single AP (Router). SmartShare Connection to Smartphone Updating the TV Firmware

• If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes. 1 (Home)

2 After checking the version of the software, update it. If you check the "Allow Automatic Updates", you can update the software automatically. Picture GENERAL SoundProgrammesNetworkGeneralSafetyAccessibilityEco ModeMobile TV OnSIMPLINK (HDMI-CEC)LG Wireless KeyboardSettings HelpNo Signal ImageReset to Initial SettingsAbout This TVUser AgreementsPicture

General /SoundProgrammesNetworkGeneralSafetyAccessibilitySoftware Version xx.xx.xx Allow Automatic UpdatesTV Information[LG] webOS TVUser GuideOpen Source Software NoticeSet ID : 1CHECK FOR UPDATES

1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the same local network. 2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG phones). 3 Enable your smartphone to share content files with other devices. 4 Open Device Connector application. (Home)

CONTENT SHARE. 5 Select the file type you want to play (movie, audio or photo). 6 Select a movie, music or photo file to play on the TV. 7 Play the media file to view and enjoy it on your TV.Miracast Setting Wi-Fi Direct Setting (Home)