SMEG VZ57B - Sink

VZ57B - Sink SMEG - Free user manual and instructions

Find the device manual for free VZ57B SMEG in PDF.

📄 42 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SMEG VZ57B - page 6
Pick your language and provide your email: we'll send you a specifically translated version.
BrandSMEG
ModelVZ57B
Product typeKitchen sink
InstallationBy a qualified professional. Silicone is not supplied.
Recommended useDo not cut directly on the surface, use a cutting board. Avoid impacts and hot objects.
Daily cleaningSoft non-abrasive sponge, dish detergent, rinse with warm water, dry with a microfiber cloth.
Stubborn stains (light colors)Bleach/warm water solution (3/4 – 1/4), let sit for 8 hours, rinse thoroughly, dry.
Stubborn stains (dark colors)Soft sponge, dish detergent, circular motions, rinse with warm water, dry.
Limescale stainsDiluted descaling agent, circular motions, let sit for a few minutes, rinse, dry.
Weekly maintenanceFill with warm water, add 2 tablespoons of laundry detergent or a tablet, let sit for 5-6 hours, rinse, dry.
Prohibited productsAlkaline cleaners, ammonia, caustic soda, drain cleaners, steel wool, abrasive sponges.
PrecautionsAvoid pouring boiling liquids without cold water (at least 1 cm of water at the bottom).
PowerNone (non-electric item)
WarrantyFailure to follow cleaning and maintenance instructions may void the warranty.

Frequently Asked Questions - VZ57B SMEG

How to install the SMEG VZ57B sink?
Installation must be carried out by a qualified professional. Silicone is not supplied. Before assembly, wash the sink with ordinary dish detergent and a soft sponge to remove production residues.
What cleaning products to use daily?
Use a soft non-abrasive sponge and ordinary dish detergent. Rinse with warm water and dry thoroughly with a microfiber cloth.
How to remove stubborn stains on a light-colored sink?
Prepare a solution of bleach and warm water (3/4 bleach, 1/4 water). Let it sit for about 8 hours (preferably overnight), rinse thoroughly and dry. Repeat 1 to 2 times if necessary.
How to remove stubborn stains on a dark-colored sink?
Use a soft non-abrasive sponge and dish detergent with small circular motions. Rinse with warm water and dry. If stains persist, repeat 1 to 2 times.
How to remove limescale stains?
Use a descaling and anti-corrosion product diluted in warm water. Apply evenly, gently rub with a soft sponge in circular motions, let sit for a few minutes, rinse with warm water and dry.
Can you put hot pots directly on the sink?
No, do not place hot pans, coffee makers or pots directly on the surface. This can cause discoloration or irreparable damage.
How to avoid scratches on the sink?
Do not cut or chop directly on the surface, always use a cutting board. Avoid abrasive sponges and steel wool. Avoid accidental impacts.
What weekly maintenance is recommended?
Fill the basin with warm water, add two tablespoons of liquid or powder laundry detergent (or a tablet), let it sit for 5 to 6 hours, rinse thoroughly and dry carefully.
What to do if burnt food remains stuck?
For tough stains, follow the instructions according to color: for light ones, use diluted bleach; for dark ones, rub in circles with dish detergent. Always avoid abrasive products.
Is the warranty affected by poor maintenance?
Yes, failure to follow cleaning and maintenance instructions may render the manufacturer's standard warranty null and void.

User questions about VZ57B SMEG

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Sink in PDF format for free! Find your manual VZ57B - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VZ57B by SMEG.

USER MANUAL VZ57B SMEG

SILICONE

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

LAVELLO TOP

graph TD A["1"] --> B["Central Structure"] C["2"] --> B D["3"] --> B E["4"] --> B F["5"] --> B G["6"] --> B

TOP SILICONE LAVELLO

graph TD A["1"] --> B["2"] C["3"] --> D["4"] E["5"] --> F["6"] G["Bottom Left"] --> H["Bottom Right"] I["Bottom Right"] --> J["Bottom Left"]

Simple line drawing of a hand covering a cloth with motion lines (no text or symbols)

2. MANUTENZIONE STRAORDINARIA

Simple line drawing of a cooking pot with crossed-out black X marks (no text or symbols)

SMEG VZ57B - MANUTENZIONE STRAORDINARIA - 2

Before fitting the sink, it is advisable to wash it using standard dish detergent and a soft sponge to remove any manufacturing residues.

Rinse the sink thoroughly and dry it using a microfibre cloth.

SMEG VZ57B - MANUTENZIONE STRAORDINARIA - 3

STANDARD INSTALLATION

Diagram illustrating a drill bit and screwdriver tool application, with a magnified view showing the process.

SILICONE

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

SINK TOP

graph TD A["1"] --> B["Central Structure"] C["2"] --> B D["3"] --> B E["4"] --> B F["5"] --> B G["6"] --> B

SMEG VZ57B - STANDARD INSTALLATION - 6

UNDERMOUNT INSTALLATION

TEMPLATE ① ②

15 mm Ø 11.5 mm

SILICONE

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

TOP SILICONE SINK

graph TD A["1"] --> B["2"] C["3"] --> D["4"] E["5"] --> F["6"] G["Bottom Left"] --> H["Bottom Right"] I["Bottom Right"] --> J["Bottom Left"]

SMEG VZ57B - UNDERMOUNT INSTALLATION - 7

The packaging materials (plastic bags, expanded polystyrene, etc.) must not be left within reach of children as they are a potential hazard.

SMEG VZ57B - UNDERMOUNT INSTALLATION - 8

Installation and support should be undertaken by qualified individuals, in accordance with the applicable legal requirements.

The silicone is not included with the product. The sink shown in this guide is for illustrative purposes only.

SMEG VZ57B - UNDERMOUNT INSTALLATION - 9

1. ROUTINE MAINTENANCE

Cleaning your Smeg product is quick and simple. Even though the non-porous surface prevents liquids penetrating into the material, it is preferable to remove them immediately using a soft, non-abrasive sponge and standard dish detergent. You should then rinse the surface and dry it carefully using a microfibre cloth.

Simple line drawing of a hand covering a cloth with motion lines (no text or symbols)

2. NON-ROUTINE MAINTENANCE

Cleaning stubborn stains is not difficult: all you need to do is choose the right product and use it correctly.

SMEG VZ57B - NON-ROUTINE MAINTENANCE - 1

For stubborn stains on LIGHT-COLOURED products, you can use a solution of bleach and warm water ( 3/4 to 1/4 ), leaving it to act for eight hours (we recommend that this cleaning be performed during the night). Afterwards, rinse thoroughly and dry the entire surface carefully using a microfibre cloth. If the stains remain, the operation can be repeated one or two more times.

SMEG VZ57B - NON-ROUTINE MAINTENANCE - 2

For stubborn stains on DARK-COLOURED products, you can remove them directly with a soft, non-abrasive sponge and standard dish detergent, using small circular movements. When finished, rinse using warm water and carefully dry the entire surface using a microfibre cloth. If the stains remain, the operation can be repeated one or two more times.

SMEG VZ57B - NON-ROUTINE MAINTENANCE - 3

To remove limescale stains, we recommend the use of a non-corrosive descaling product diluted with warm water. Distribute the solution uniformly over the entire surface of the product. Clean with a soft, non-abrasive sponge using small circular movements and leave the product to act for several minutes (follow the instructions and conditions for use on the product label). When finished, rinse using warm water and dry carefully using a microfibre cloth.

Failure to follow the cleaning and maintenance instructions stated in this manual may invalidate the standard warranty provided by the manufacturer.

SMEG VZ57B - NON-ROUTINE MAINTENANCE - 4

To ensure that there is no change to the characteristics of the product, we recommend that users observe the following precautions:

- dry the surface of the product every day to avoid prolonged exposure to water that could lead to the build-up of limescale or stubborn stains

- do not use detergents that contain alkaline substances and aggressive liquids (such as ammonia, caustic soda or drain cleaners)

- do not remove traces of dirt using steel scourers or abrasive sponges that could damage the surface

- do not cut or chop directly on the surface of the product because this could cause irreparable scratches (always use chopping boards)

- avoid accidental knocks that could cause irreparable micro-damage

- do not place hot cookware, pans or coffee makers directly on the sink surface: stains from discolouration and/or damage could form in areas where hot items are placed

- avoid pouring boiling liquids directly into the sink without first turning on the cold tap and filling the sink with at least 1 cm of water, as this could damage the product

• to prevent the build-up of limescale, it is recommended that a descaling treatment be completed at least once a week. This is recommended in particular for dark-coloured sinks. Fill the tub with warm water and add two spoonfuls of liquid or powder dishwasher detergent or a dishwasher tab. Leave the solution for 5/6 hours. Rinse thoroughly and dry carefully.

Simple line drawing of a crossed-out kitchen counter with no text or symbols

Simple line drawing of a cooking pot with crossed-out kitchen panes (no text or symbols)

SMEG VZ57B - NON-ROUTINE MAINTENANCE - 7

Do not put pans or coffee makers that have just been taken off the heat (which sometimes reach 500°C) directly into sink.

Diagram illustrating a drill bit and screwdriver tool application, showing correct/incorrect states of the process.

SILICONE

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

ÉVIER HAUT

graph TD A["1"] --> B["Central Structure"] C["2"] --> B D["3"] --> B E["4"] --> B F["5"] --> B G["6"] --> B

SMEG VZ57B - NON-ROUTINE MAINTENANCE - 13

INSTALLATION SOUS LE PLAN SUPÉRIEUR

1 2 PATRON

15 mm Ø 11,5 mm

SILICONE

Diagram of a layered mechanical or electronic component with upward arrows indicating motion or force, no text or symbols present.

HAUT SILICONE ÉVIER

graph TD A["1"] --> B["2"] C["3"] --> D["4"] E["5"] --> F["6"] G["Bottom Left"] --> H["Bottom Right"] I["Bottom Right"] --> J["Bottom Left"]

Simple line drawing of a hand wiping a surface with a cloth (no text or symbols)

Simple line drawing of a cooking pot with steam rising, crossed by a diagonal line (no text or symbols)

Diagram illustrating a drill bit and screwdriver tool application, with a magnified view showing the process.

SILIKON

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

SPÜLE ARBEITSPLATTE

graph TD A["1"] --> B["Object"] C["5"] --> B D["3"] --> B E["4"] --> B F["6"] --> B G["2"] --> B

SMEG VZ57B - INSTALLATION SOUS LE PLAN SUPÉRIEUR - 14
UNTERBAU-INSTALLATION

SCHABLONE ① ②

15 mm Ø 11,5 mm

SILIKON

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

ARBEITSPLATTE SILIKON SPÜLE

graph TD A["①"] --> B["②"] C["③"] --> D["④"] E["⑤"] --> F["⑥"] G["⑦"] --> H["⑧"]

Simple line drawing of a hand cleaning a surface with a cloth (no text or symbols)

Simple line drawing of a cooking pot with crossed-out black X marks (no text or symbols)

Diagram illustrating a drill bit and screwdriver tool application, showing correct/incorrect states of the process.

SILICONA

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

FREGADERO ENCIMERA

graph TD A["①"] --> B["⑤"] B --> C["③"] C --> D["④"] D --> E["⑥"] E --> F["②"] F --> G["⑤"]

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

ENCIMERA SILICONA FREGADERO

graph TD A["1"] --> B["2"] C["3"] --> D["4"] E["5"] --> F["6"] G["Bottom Left"] --> H["Bottom Right"] I["Bottom Right"] --> J["Bottom Left"]

Simple line drawing of a hand wiping a surface with motion lines (no text or symbols)

Simple line drawing of a cooking pot with a crossed-out X symbol (no text or labels)

Diagram illustrating a drill bit and screwdriver tool application, with a magnified view showing the process.

SILICONE

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

LAVA-LOUÇA TAMPO

graph TD A["1"] --> B["Object"] C["5"] --> B D["3"] --> B E["4"] --> B F["6"] --> B G["2"] --> B

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

TAMPO SILICONE LAVA-LOUÇA

graph TD A["1"] --> B["2"] C["3"] --> D["4"] E["5"] --> F["6"] G["Bottom Left"] --> H["Bottom Right"] I["Bottom Right"] --> J["Bottom Left"]

Simple line drawing of a hand cleaning a surface with a cloth (no text or symbols)

Simple line drawing of a crossed-out kitchen counter with steam rising (no text or symbols)

Diagram illustrating a drill bit and screwdriver tool application, showing correct/incorrect states of the process.

СИЛИКОН

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

Hand wiping a surface with a cloth (no text or symbols)

2. НЕПЛАНОВЫЙ УХОД

Simple line drawing of a kitchen with a crossed-out black X symbol (no text or labels)

Diagram illustrating a drill bit and screwdriver tool, showing correct/incorrect states of the process.

SILIKON

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

ZLEWOZMYWAK BLAT

graph TD A["1"] --> B["Central Structure"] C["2"] --> B D["3"] --> B E["4"] --> B F["5"] --> B G["6"] --> B

SMEG VZ57B - НЕПЛАНОВЫЙ УХОД - 7
MONTAŻ POD BLATEM

SZABLON ① ②

15 mm Ø 11,5 mm

SILIKON

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

BLAT SILIKON ZLEWOZMYWAK

graph TD A["1"] --> B["2"] C["3"] --> D["4"] E["5"] --> F["6"] G["Bottom Left"] --> H["Bottom Right"] I["Bottom Right"] --> J["Bottom Left"]

Simple line drawing of a hand cleaning a surface with a cloth (no text or symbols)

2. KONSERWACJA DORAŻNA

Simple line drawing of a cooking pot with crossed-out kitchen panes (no text or symbols)

Diagram illustrating a drill bit and screwdriver tool application, showing correct/incorrect states of the process.

СИЛИКОН

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

СІЛЬНИЦЯ СИЛІКОН КУХОННА МИЙКА

graph TD A["1"] --> B["2"] C["3"] --> D["4"] E["5"] --> F["6"] G["Bottom Left"] --> H["Bottom Right"]

Simple line drawing of a hand cleaning a surface with a cloth (no text or symbols)

Simple line drawing of a kitchen with a crossed-out black X symbol (no text or labels)

Diagram illustrating a drill bit and screwdriver tool application process, with Chinese labels.

سیلیکون

Isometric diagram of a device with two stacked plates and directional arrows indicating movement or force (no text or symbols)

Diagram of a mechanical assembly with two stacked components and upward arrows indicating motion (no text or symbols)

Two hand icons with different textures, one covering a cloth and the other covering a surface (no text or symbols)

Simple line drawing of a crossed-out kitchen counter with no text or symbols

Simple line drawing of a cooking pot with crossed-out black lines (no text or symbols)

SMEG VZ57B - KONSERWACJA DORAŻNA - 17

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SMEG

Model : VZ57B

Category : Sink