Drift W1 - Skate SEGWAY - Free user manual and instructions

USER MANUAL Drift W1 SEGWAY

Original instructions

Contents

I Riding Safety
2 Packing List 03
3 Diagram 04
4Charging 05
5 Before Rding 05
5 Learning to Ride 07
7 Learning More 08
8 Warnings 09
9 Calibration and Alarms 12
10 Maintenance 13
II Specifications 14
12 Certifications 16
13 Trademark and Legal Statement: 17
14 Contact 18

Thanks for choosing the Segway Drift W1!

Thanks for choosing the Segway Drift WI (heroin after referred to as Segway Drift).

To enjoy the many features of your Segway Drift you must read and follow these instructions.

Enjoy your nice!

1 Riding Safety

1. The Sogway Drill is a recreational product. Before monitoring riding suits, you need to practice: "Neither A knife (Nincool (Beijing) Tech Co., Ltd. and its sub-diaries and all faces) nor Sogway Inc. is responsible for any injuries or damage caused by a rider's inexperience or failure to follow the instructions in this document."
2. Remember that whenever you ride the Segway Drift your risk is injury or death from loss of control, collisions, and falls. You can reduce this risk by following all the instructions and warnings in this manual, but you cannot eliminate all risks. When riding in public spaces always comes with local laws and regulations. As with other vehicles, Issi's speeds require longer driving distance. Sudden braking on smooth surfaces could lead to wheel slip, loss of balance or falls. The Segway Drift is designed to be hidden on a flat hard surface which is free of obstacles and wind bumps. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when on riding unfamiliar areas.
3. Always wear a helmet when riding. Use an approved bicycle on sketebond helmet that fits properly with the skin strap in place, and provides protection for the back of your head.
4. Do not attempt your first ride in any area where you might encounter children, pedestrians, cars, vehicles, bicycles, or other obstacles and potential hazards.
5. Respect pedestrians by a ways yielding the right of way. When approaching a pedestrian from the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from behind, announce yourself and slow down to walking speed when passing. Pass on the left whenever possible. Please obey local traffic laws and regulations.
6. In places without taxes and regulations govern self-balancing electric vehicles, comply with the safety guiden net out in this manual. Nether Nbebot Net Seaway Inc is responsible for any property damage, personal injury/death,accidents,or local disputes caused by violations of the safety instructions.
7. Do not allow anyone to ride your Segway Drift on his/her own unless he/she has carefully read this manual, and followed the New Ricer Tutorial by scanning the QR Code on the Welcome Card. The safety of new riders is your responsibility. Assess new riders until they are correctable with the basic operation of the Segway Drift. Make sure each new rider wears a helmet and other protective gear.
8. Before each ride check for loose faster and damaged components. If the Segway Drift makes abnormal sounds or signals an alarm, stop riding immediately and contact售后服务 services.

9. Ee i t y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y y

10. To reduce risk of injury, you must read and "follow all CAJTON" (a). "Tios" (*), and "WARNING!" (A) notices in this document. Do not rido a, an unsafe space. Under no circumstances should you ride on roads with motor vehicles. The manufacturer recommends it be 64 years old. Always follow these safety instructions:

A. Fereale whc at yolng rld, 15

1. Anyone under the influence of alcohol or drugs.
   ii. Anyone who suffers from disease that puts himseal/horsel at risk if he/She emigrers in strenuous physical activity,
   iii. Anyone who has problems with balance on with motor skills that would interfere with their ability to maintain balance.
   In: Anyone whose weight is outside the stated limits (see Specification).

v. Pregnant woman.

B. Riders under the age of 18 years and should be under adult supervision.

C Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws.
D. To ride safely, you must be able to clearly see what is in front of you and you must be clearly visible to others.
F Do not rde in the snow, in the rain, or on roads with an are wet, mudy, icy, or that are slippery for any reason. To not ride over obstacles (including, but not limited to, sand, one gravel, or sticks). Doing so could hurt a close of balance or traction and could cause a fall.
1. Do not include the Seegway Drift in the claim. Badging in the rain may cause the Seegway Drift to be submerged in water resulting in Locoction damage and even a risk of fire and explosion due to a wet, slurry pack. Damage and losses caused by water submersion are not covered by the Limited Warranty.
G. Do not accrue or deplete suddenly, if the Segway Dr ITL. It's back, you have reasoned the speed limit, slow down. Do not overperform the speed limit nor is your risk injury from loss of control, collisions and falls.

1. Do not attempt to change your Segway Drive if it, the charger, or the power outlet is wet.

2. As with any electronic device, use a surge protector when charging to help protect your Segway Trip from damage due to power surges and voltage spikes. Only use the Segway supplied charger. Do not use a charger from any other product.

3. U.S. only Nimbost or Swaye approved parts and accessories Do not modify your Swaye Drill Modifications to your Swaye Drill could be used with the operational of the Swaye Drill, resulting in serious injury and/or damage, and could void the Limited Warranty.

02G8

2 Packing List

MainframeX2

User Materials

Charger

Power Cord

When unpacking your Segway Draft, please verify that the above items are included in the package. If you are missing any components, please contact your dealer/distributor or nearest service center (see Contact).

Please retain the box and packaging materials in case you need to ship your Segway Drill in the future.

Always power off your Sogway Drift and unplug the charge cable before clearing.

3 Diagram

Power ON/OFF:

The Seaway Drift must be on the ground when powered on or off. To avoid injury, do not touch the wheel with any part of your body.

Power on Press the power button , the power level Indicator light will turn off and the Seseway Drill will be twicePower off . Press the power button . The power level Indicator light will turn off and the Seseway Drill will be zero

Power Level Indicator:

There are 4 LED lights, each light has a power stimulus: light on and blink. The status indicates the power remaining as below.

Status	Power Remaining	Status	Power Remaining
	fall power		apprax. 50%
	approx. 48%		apprax. 36%
	approx. 25%		apprax. 25%
	approx. -25%		<1%

Handle:

While the Segoay Drill is powered off, use the handle to lift and carry.

Glow light:

After the Seaway Drift's powered up, press and hold the power button for about 3 seconds to switch on glow light mode. If successful, the Seaway Drift will beep once.

Always Lummil. U

4 Charging

Do not connect the charger if the charge port or charge cable is wet. Trocity packs only to be charged by adults.

a. Quanthorubbercap

Inserltheoretpinlcchengeon

Your Sweeney Dr. is very charged when he left on the charger charges from red (charging) to green (frickies charge). Close the rubber cap when not charging.

a You can charge both mainframes at the same time.

5 Before Riding

There are safety risks when learning to ride the消防安全 Drill. You must read this User Manual and follow the New Ricer Tutorial by scanning the QR code on the Welcome Card before your first race.

Whenever the Segway Drift is answered on it MURT stay on the ground. To avoid injury do not touch the wheel with any part of your body.

Sterility Mode: The Railway Drift will enter Standby Mode when the Railway Drift is powered or and parked on the ground.

Balance Mode The Seaway Drift will only Balance Mode when its gently touches on the lifted end.

The Railway Drift does not detect a motor within 1 km/minute before entering the mode. The Railway Drift will stop standing by Mode automatically.

Do not prese the idg of the Sogway Dr t whin Balance Mode if you are not nding it. Doasoutcoue force the Sogway Dr It to rereovnly. It may mad to serious injuries for you or others.

-

a. There is no front or back of the Segway Dnt. You can stop in front of her direction.
b. Whon the Sway Drifts in Balance Mode, place ore foot on the midde of the mainline's foot met. 6 wortle pressure on the front end of the feet met, the Sway Drift will go forward, give way by pressure on the rear end of the footmet. 8 go backwards.
*If the Railway Drift cannot enter Balance Mode and keeps a car, try rectifying it. If the problem persists, please contact after sales service.

u. The Sgway Dr I is very sensitive. Relax when riding and keep your controller of gravity steady.

0501

6 Learning to Ride

WARNING

R der must weigh between 22-220 lbs (10 - 100kg)

Wear an approved helmet and other protective gear to minimize any possible injury.

GetReady

Ask a friend to assign you your first riddle. Go to a large open area, Place both main frames shoulder width apart and out them into Balance Voice.

1. Vehicle Control Practice

a. lur'or one mainham put single foot on the middl of the foot mat, then swing back and forth to feel the control
b. Switch to the other foot, then swing back and forth to feel the control.

3. Stepping On

With this strange from your friend, put some foot on the middle of the main name's foot mat. When comfortable, stand straight and look straight ahead while stepping up with your other fool. Try to avoid rocking back and forth.

1. Rite

With your friend nearby, slowly lean forward and feel the Segway Drift move forward. Slowly lean backward and feel it move backwards. Turn your whole body left or right gently to turn the Segway Drift.

1. Stepping Oil

To step off gently slow down to a controlled stop. Slowly shift your weight to one foot and place your opposite foot on the ground.

7 Learning More

Sosn the QR code on the Welcome Card to follow the New Rider Tutorial before you ride and to learn more ways to play.

8Warnings

You must read and understand the warnings and riding Safety instructions in this manual before attempting to ride the Norway Drive. Failure to follow these warnings could result in death or serious injury due to loss of balance, traction, and/or control, collisions, and falls.

motorways, highways or streets

Do not traverse bumps or uneven terrain. Can not ride on p

Avoid slopes steeper than 10^

f no ride through pudles or other bodies of water. Do not get the Sagway Drift wet.

On no ride over holes, cracks, soaps, or inner obstacles.

Do not attempt sums of any kind. Always keep both feet on the foot marks.

Do not cross and forth or sit your weight abruptly.

Do not carry any passengers. Do not carry a child. Do not ride when pregnant.

Do not sone erne when theSeagway Drifts backsond signals an alarm. Do notaccordation which the speedlnter is activated. Slow down.

Do not ride on low, rac, or surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice).

Avoid contacting obstetrics with the tire/wheel

Watch your head when picking through doorways.

Do not lift the Segway Drift when lowering or after powered on. The wheels will spin causing a high risk of injury.

Do not ride with high heels. Always ride with properly strapped closed toe shoes.

Do not press the edge of the Segway Drift with it. Balance Mode if you are not制动. Doing so could force the Segway Drift to move rapidly, if it may lead to serious injuries for you or others.

9 Calibration and Alarms

Calibration

When in Balance Mode, if the Railway Drift meets forward or backward on its own on flat ground, it needs to be combined. If the problem persists, please contact airplanes service.

To Calibrate the Segway Drive:

p. Place the Norway Drill Updo down on flat ground and power it on. The wheel will spin. Be sure to keep your hands away from the soiling wheel as this could cause injury.

b, Once this wheel starts turning, your power of yourSagway Drift This will complete the task of libration.

Once powered on the Segway Drift must stay on the ground. To avoid injury, do not touch the wheel with any part of your body.

- Alarms

a. Overreating

Riding for an extended period of time could increase the internal temperature of your Segway Drill in excess of 120^ (50^) , if this happens, the glow lights will flash red, an alarm will sound and your Segway Drill will not be able to charge. Simply step off the Segway Drill power in off, and give it me to cool back down to a normal operating temperature.

To avoid injury, do not touch or ride the Segway Orft while there is an alarm and the glow lights are flashing red. Other Narmas:

For any other arms, try restarting your Segway Drift. The problem persists, please contact after-sales service.

10 Maintenance

Cleaning and Storing Your Segway Drift

Usa a soft, wet cloth to wipe the mainline clean. Here to remove dirt can be scrubbed with a toothbrush and toothpaste, then cleaned with a soft, wet cloth.

NOTE

The IP Rating of the mainline is IP04, IP Rating of the barley track is IPX6. Do not wash your Segway Drill with alcohol, grease, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your Segway Drill. Do not wash your Segway Drill with a power washer or high pressure hose.

WARNING

Make sure the Seaway Drift is lowered OFF. The charging cable is unplugged, and the rubber cap on the charge port is tightly secured before a charging; otherwise you may expose yourself to electronic shock or damage the electronic components. Store your Seaway Drift in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life.

Battery Pack Maintenance

Do not store or charge the battery at temperatures outside the stated limits (see Specifications). Do not expose the battery to fire. Do not discard or destroy the battery. Refer to your local laws and regulations regarding battery recycling and/or disposal.

A well maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid crusting the battery compactly. When used at room temperature (70°F [22°C]) the battery range and performance is at best, whereas using it at temperatures below 320°F (90°C) can decrease range and performance. Typically, at 145°F (< 30°C) range can be half that of the same battery at 70°F (25°C). Battery range will recover when temperature rises.

NOTE

Typically, a fully charged battery should retain charge for 120-180 cycles. Remember to change the battery after each use. Completely draining the battery may cause permanent damage to the battery. Electronics inside the battery record include the period discharge condition of the battery; damage caused by over-discharge or under-discharge will not be covered by the limn led Warranty.

WARNING

Do not attempt to disassemble the battery. Risk of fire: No user serviceable parts

WARNING

Do not ride when the ambient temperature is outside the machine operation temperature (see Specifications) because low/high temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage due to tips or falls.

11 Specifications

Product Name: Skyway Dr. W1
Dimensions	Mainframe (single wheel)	11.6x6.4x4.8 in (291x162x121 mm)
	Loin	12.5x10.6x8.7 in (318x250x219 mm)
Weight	Payload	22.220 lbs (10-100 kg)
	Net (single wheel)	Approx. 7.7 lbs (3.5 kg)
Rider	Recommender App	6+ years old. See the weight limit
Machine Parameters	Max Speed	Approx. 7.5 mph (12 km/h) Top speed will vary based on tire's size and remaining battery load. Top speed will be reduced when the battery is low.
	Typical Riding Time*	45 minutes
	Max Slipper*	10"
	Traversable Terrain	Flat, hard ground free of bumps or obstacles.
	Operating Temperature	14-104°F (10-40°C)
	Storage Temperature	-4-122°F (-20-50°C)
		Mainframe (154) Battery pack (100% RoHS)
	Max Storage Time	Approx. 180 days/100% power Approx. 30 days/30% power
	Charge Time (for both mainframes)	Approx. 5 hours
Battery	Nomine Voltage	22.2 VDC
	Max Charging Voltage	28.2 VDC
	Charging Temperature	32-0.02°F (0-40°C)
	Nominal Capacity	47.4 W
	Battery Management System	Over-voltage, under-voltage, over-current, short circuit, and over-heating protection. Auto reset, auto balance, and auto-wake.
Motors		5 Nm Max torque (single wood)
Charger	Output Power	37.5 W
	Input Voltage	100-240 VAC
	Output Voltage	25 ± 0.2 VDC
	Output Current	1.8 A

[Typical floating time: fixed white ring under full power 165 ft/s (75 kg) / min; 77° F (25°C); 3 mph (8 km/h); average speed on a flat ground].
[2]Max. Sinner tested while riding with the payload of 165 lbs (73 kg) and speed equals that 3mph (5km/h).

12 Certifications

This product has been tested and passed ANSI/CAN/UL 2272.

The battery complies vth JN/20138.3

Federal Communications Commission (FCC) Compliance Statement for USA

This device complies with part 15 of the CC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part US of the FCC Rules. These limits are designed to provide responsible protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, thus installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the users encouraged to try to correct the interference by one or more of the following measures:

Roeion or relocate the receiving antenna.
Increase the separation between the equipment, and reac
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

Industry Canada (IC) Compliance Statement for Canada

This device complies with Industry Canada license-exempt RSS standard (5), Operations is subhead to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CANICES3（B)/NMB2（B)

Neither Sagway Inc. nor N necht is responsible for any changes or mectical cns not expatned apbved by Sagway Inc. or Nnecht. Such modifications could void the user's authority to operate the equipment.

Important WEEE information

WELL Disposal and Recycling Information Correct Disposal of this product. If a manufacturer indicates that this product should not be disposal within other household wastes throughout the EU.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material as resources. To return your used device, please use the return and collection systems for contact the retailer where the product was purchased. They can also this product for environmental sale recycling.

Battery recycling information for the European Union

Batteries or packaging for batteries are labeled in accordance with European Directive 2006/65/EC and amendment 2013/65/EU concerning batteries and acclimators and waste batter as and accumulator. The Directive determines the framework for the return and recycling of used batteries and accumulator as applicable throughout the European Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather "declaimed upon and of life per this Directive.

In accordance with the European Directive 2006/66/FCC and agreement 2013/56/FLU, batteries and accumulator are taboed inlcable that they are to be collected separately and recycled at end of 11. Feb. The abel on the baily may also include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulator must not dispose of batteries and accumulator as unsorbed municipal waste, but use the collection framework available to customers for the return, recyclings, and treatment of batteries and accumulator to s. Customer participation is important to minimize any potential effects of bacteria and accumulator on the environment and human health due to the potential of hazardous substances.

Before using electrical and electronic equipment (EE) in the waste collection stream or in waste collection facilities, the end user of equipment containing batteries and/or accumulators must remove those batteries and accumulators for separate collection.

Restriction of Hazardous Substances (RoHS) Directive

This N meb (Changzhu) Tech Co., Ltd. product, with included parts (coloes, cords, and so on) meets the requirements of Directive 2017/68/FU on the restriction of the use of certain hazardous substances in electronics and electronic equipment ("RoHS reacct" or "RoHS 2").

Electromagnetic Compatibility Directive & Low-Voltage Directive

Supplementary Material 1: EU Directive for regulatory topics only: Hogshilweg 8, 1201CC Amsterdam, The Netherlands.

Herbert, Nimobot (Changzhou) Co Ltd., Ltd. declares that this equipment, listed in this section are in compliance with the essential requirements and other relevant provisions of Directives 20/1/30/EU & 2017/30/EU.

13 Trademark and Legal Statement

Seway and the Ridor Design are trademarks of Software no. registered in the U.S. and other countries. Software Drills is a Trademark of Seway no. Nambol is a Trademark of Nambol ( Ltd ) Tech Co Ltd., registered in the U.S. and other countries. The respective owners reserve the rights of their trademarks referred to in this manual.

The Segway Dif is covered by relevant patents. Forpatent information go to http://www.sagway.com

We have alternate to include descriptions and instructions for all the functions of the Gateway Drift at the time ofiniting . However , your Gateway Drift may differ slightly from the one shown in this document.

Please note that there are multiple Segway models with different functions, and some of the functions mentioned here may not be applicable to your unit. The manufacturer reserves the right to change the design and functionality of the Segway Drive product and documentation without prior notice.

2018Nmbot(Bing)TechCoLtd.All rights reserved

14 Contact

Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your Sagway Drive.

Americas:

17 Technoiogy Drive, Bad Erd NH 0310, USA

1:1-5032226000

Tax-603-222-6001

TollFree:1-866-473-4929

E-mail Sales customer [e-mail]

E-mail ServiceTechnicalsuppoortpeepway.com

Website: www.segway.com

Europe, Middle East and Africa

Segway Europe AB

Hogeheihweg 8, 1010C, Amsterdam, The Netherlands

Final service: serv celsegway.eu.com

Website: www.segway.com

Asia Pacific

China Mainland N nebot (Beijing) cch Co., Ltd.

Room B201, B202, B6 Bldg, Zhongguancun Dongsheng Technology Park (Northern Territory), No. 56, Xixiaokou Rd,

Haidian Dist., Beijing, China

Tc:403-607-3001/88-10-8482-8002

L-mail [e-mail]

Source: Korea:Seovayseoul, Inc.

804-65 87 365 Gangsen-1, Gangse-2, Seo., 3epub in of Korea Z17(07803)

Ta:82-73-4068-8002

E-mail: [e-mail]

SingarsirNnrcst (Sngasr) 10

7030 ArMoKie Aaveb. North StAeAr MoKic UNI #07-38 Simpaor

E-mail:apacdistgway.com

Have your Segway Drill's serial number on hand when contacting Segway.

You can find your seral number on the bottom of your Segway Driit.

MODE D'EMPLOI

SEGWAY

The manufacturer reserves the right to make changes to the product, and update this manual at any time. Visit www.segway.com to download the latest user materials.

www.segway.com

V1.0

If you are 4 voyants D.E., please voyage in a dozen flights. If you are 3 or more voyants, I would indicate your insurance, insurance plan, etc.

Status	Passive status	Status	Passive status
###	###	###	###
###	###	###	###
###	###	###	###
###	###	###	###

Poignee:

ITechnology Drive, Bedford, NH 03110, USA

Ta:1603-2276000

Fax：[phone]

Gnub1-886-4/3-1929

E-mailbounlesventes:[e-mail]

E-mail pourle service [e-mail]

Site:terneWwWseWy.oo

Siege social Ninebot (Beijing) Tech Co. 10

Room B201, B202, D6 Bldg, Zhongguancun Dongsheng Technology Park (Northern Territory), No. 65, Xi'ankei Rd

Hoshan Dist. 20jing, China

400-607-5002/83-10-6452-5002

F-mail: sales@chinel

Cerocdu Sud Serwaysequu Inc.

804-68.838b,Gangsgc-ro,Cangsgo-gu,Seou,Republc of Korea ZF(07803)

Te:8270/6688002

F-mail: [e-mail]

Singapore: Minrocool (Singapore) Pte Ltd.

7080ArgMoKicAve5,NorthStarArgMoKic,UNT#07-30Singapore

[e-mail]