ROSIERES LVI 256 RU1 - Dishwasher

LVI 256 RU1 - Dishwasher ROSIERES - Free user manual and instructions

Find the device manual for free LVI 256 RU1 ROSIERES in PDF.

English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

Pick your language and provide your email: we'll send you a specifically translated version.
Product type Built-in dishwasher
Brand Rosieres
Model LVI 256 RU1
Capacity 12 place settings (IEC 436 standard)
Dimensions (HxWxD) 82-88.5 cm x 59.7 cm x 55 cm
Open door clearance 117 cm
Voltage 230 V
Water pressure Min 0.08 MPa - Max 0.8 MPa
Wash programs Cold prewash, Intensive 65°, Universal 65°, Eco 55°, etc.
Special functions Half load, Delayed start (1-12 h)
Water softener Adjustable to 5 positions (0-4)
Salt reservoir capacity 1.5 - 1.8 kg
Rinse aid capacity 130 ml
Tub material Stainless steel
Filters Self-cleaning micro filter, central reservoir, metal plate
Safety Anti-overflow device, electrical safety in case of door opening
Maintenance Regular cleaning of filters, spray arms, and door seal
Noise level Not specified
Energy class Not specified
Weight Not specified

Frequently Asked Questions - LVI 256 RU1 ROSIERES

How to turn the dishwasher on and off?
Press the On/Off button (button A) to start or stop the appliance. Make sure the door is properly closed and the water tap is open.
Which program to choose for very dirty dishes?
Use the Intensive 65°C program for very dirty pots and dishes. Add detergent to the prewash compartment if necessary.
How to use the half load function?
Activate the Half load button (button B) to wash only the upper basket. Place cutlery in the lower basket. This reduces water and energy consumption.
How to set the delayed start?
Turn the Delayed start dial (button E) to the desired number of hours (1 to 12 h) before pressing the On/Off button. For a short delay, first turn to a higher setting then come back.
What to do if the dishwasher does not start?
Check that the plug is connected, the On/Off button is pressed, the door is properly closed, and the water tap is open. If the problem persists, consult the manual.
How to adjust the water softener?
Remove the lower basket, unscrew the salt reservoir cap, then turn the adjustment screw (with a screwdriver) to the position corresponding to your water hardness (table in the manual). Factory setting is position 2.
When to fill the salt reservoir?
The salt refill indicator light (H) lights up on the control panel. There is also a salt indicator. White stains on dishes indicate a lack of salt.
How to clean the filters?
After each wash, remove the micro filter by turning the handle counterclockwise. Clean the central reservoir and metal plate under running water. Replace everything correctly.
What to do if dishes are not dried well?
Leave the door slightly open at the end of the program to improve air circulation. Also check the rinse aid setting (recommended position 3). Increase dosage if necessary.
Why are there white spots on the dishes?
This may be due to hard water. Check the salt and rinse aid levels, and adjust the water softener setting. If the problem persists, contact customer service.

User questions about LVI 256 RU1 ROSIERES

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Dishwasher in PDF format for free! Find your manual LVI 256 RU1 - ROSIERES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LVI 256 RU1 by ROSIERES.

USER MANUAL LVI 256 RU1 ROSIERES

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ROSIERES

Model : LVI 256 RU1

Category : Dishwasher