43UM7100PLB - Television LG - Free user manual and instructions

Product Type	LED backlit TV
Brand	LG
Model	43UM7100PLB
Screen Size	43 inches (108 cm diagonal)
Screen Resolution	4K Ultra HD (3840 x 2160 pixels)
Broadcast System	DVB-T/T2, DVB-C, DVB-S/S2, PAL/SECAM
Wireless Connectivity	Wi-Fi 802.11a/b/g/n/ac, Bluetooth
HDMI Ports	2 HDMI inputs (Ultra HD Deep Color)
USB Ports	1 USB 2.0 port
Magic Remote Compatibility	Yes (model AN-MR19BA)
VESA Standard	200 x 200 mm (M6 screws, 4 screws)
Power Supply	100-240 V, 50/60 Hz
Power Consumption (typical)	Approximately 70 W (estimated)
Weight (without stand)	Approximately 8.5 kg (estimated)
Dimensions (without stand)	Approximately 96.7 x 56.5 x 8.5 cm (estimated)
Operating Temperature	0°C to 40°C
Operating Humidity	Less than 80%
Maintenance and Cleaning	Unplug before cleaning; use a soft, dry cloth; avoid abrasive products
Safety	Do not expose to rain or moisture; keep flammable objects away
Spare Parts and Repairability	Use only LG-approved parts; technical support available

Frequently Asked Questions - 43UM7100PLB LG

How to connect the TV to the Internet via Wi-Fi?

Press the Settings button on the remote, then go to [All Settings] > [Connection] > [Wi-Fi Connection]. Select your network and enter the security key if necessary.

How to use the Magic Remote?

Make sure the batteries are installed (1.5V AA model). Point the remote at the TV and press the wheel (OK) to pair. To make the pointer appear, shake the remote from left to right.

What to do if the TV does not turn on?

Check that the power cord is plugged into a working outlet. Try plugging another device into the same outlet to confirm power. If the problem persists, contact LG customer service.

How to resolve no signal on the HDMI input?

Check that the HDMI cable is properly connected and the external device is on. Try restarting the TV and the device. Use a certified HDMI cable if possible.

How to clean the TV screen?

Unplug the TV. Use a soft, dry cloth (microfiber) to gently wipe the screen. Never apply liquid directly to the screen and avoid chemicals like alcohol or ammonia.

Can I mount this TV on the wall?

Yes, it is compatible with VESA 200x200 mm wall mounts. Use M6 screws (not supplied). LG recommends hiring a qualified professional for installation.

How to update the TV firmware?

Go to [Settings] > [All Settings] > [General] > [About This TV] > [Update]. You can enable automatic updates. An internet connection is required.

What does the message 'No Signal' on the screen mean?

This means no input source is detected. Check that the correct device is connected and turned on. Use the Source button on the remote to select the appropriate input.

How to stream content from my smartphone to the TV?

Connect your smartphone and TV to the same Wi-Fi network. On your smartphone, open the LG TV Plus app (or a compatible sharing app) and select the file to play. The TV must be selected as the playback device.

Why are there black or bright spots on the screen?

There may be tiny fixed dots (pixels) that are normal for the display technology. This does not affect TV performance. If the number of dots is excessive, contact LG customer service.

USER MANUAL 43UM7100PLB LG

MANUEL D'UTILISATION

Sécurité et ↔

Téléviseur LED*

RISQUE D'LECTROCUTION NE PAS OUVRIR

AVERTISSEMENT: AFIN DE RÉDUIRE LE RISQUE D'ÉLECTROCUTION, NE RETIREZ PAS LE CAPOT (OU L'ARRÊRÉ). AUCUNE PIECE N'EST REPARABLE PAR L'UTILISATEUR LUI-MÉME. CONFIEZ L'ENTRETIEN DE CET APPAREIL À UN PERSONNEL QUALIFIÉ.

• Image shown may differ from your TV.
• Image shown on a PC or mobile phone may vary depending on the OS(Operating System).
• App icon positions may vary on the platform, depending on the software version.

Network Settings

1 Press the Settings) on the remote to access the settings menu. Point the 1 Settings] icon and select by pressing the Wheel (OK) button on the remote.

4 If the connection is successful, the "[Connected to Internet]" is displayed.

2 Select the [Connection] → [Wired Connection(Ethernet)] or [Wi-Fi Connection].

You can check the status of connection in [Advanced Wi-Fi settings].

3 The device automatically tries to connect to the network available (wired network first). When you select the [Wi-Fi Connection], the network list available is displayed. Choose the network you wish to use.

For wireless AP (Router) that have the symbol, you need to enter the security key.

Troubleshooting Network Problems

1 Press the Settings) on the remote to access the settings menu. Point the [A] Settings] icon and select by pressing the Wheel (OK) button on the remote.

2 Select the [Connection] → [Wired Connection (Ethernet)] or [Wi-Fi Connection] → [Advanced Wi-Fi Settings].

→

Follow the instructions below that correlate to your network status.

Check the TV or the AP (Router).

When X appears next to TV:

1 Check the connection status of the TV, AP (Router).
Power off and power on the TV, AP (Router).
If you are using a static IP, enter the IP directly.
Contact internet service provider or AP (Router) company.

Check the AP (Router) or consult your Internet service provider.

When X appears next to Gateway:

Unplug the power cord of the AP (Router) and try to connect after 5 seconds.
2 Initialize (Reset) the AP (Router).
Contact internet service provider or AP (Router) company.

When X appears next to DNS:

Unplug the power cord of the AP (Router) and try to connect after 5 seconds.
Initialize (Reset) the AP (Router).
Check that the MAC address of the TV/AP (Router) is registered with your Internet service provider. (The MAC address displayed on the right pane of the network status window should be registered with your Internet service provider.)
4 Check the AP (Router) manufacturer's website to make sure your router has the latest firmware version installed.

SmartShare Connection to Smartphone

1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the same local network.
2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG phones).
3 Enable your smartphone to share content files with other devices.
4 Select the file type you want to play (movie, audio or photo).
5 Select a movie, music or photo file to play on the TV.
6 Play the media file to view and enjoy it on your TV.

Updating the TV Firmware

• If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes.

1 (Settings) → [All Settings] → [General] → [About This TV] → [CHECK FOR UPDATES]
2 After checking the version of the software, update it. If you check the "[Allow Automatic Updates]", you can update the software automatically.

Cand X aparé in dreptul Gateway:

Cand X aparé in dreptul DNS: