Elements motion - Motion detector GIGASET - Free user manual and instructions

Product type	Motion detector
Brand	Gigaset
Model	Elements motion
Power supply	Lithium battery 3.0 V type CR123A or CR17345
Outdoor range	Up to 300 m
Indoor range	Up to 50 m
Operating temperature	+5 °C to +45 °C
Installation environment	Dry indoor, protected from water splashes
Fixing methods	Mounting foot, double-sided adhesive tape or supplied screws and wall plugs
Use	Extension of the Gigaset Elements security pack
Maintenance	Wipe with a damp or antistatic cloth, without solvent or microfiber
Important safety	Do not expose to heat, direct sunlight, humidity or corrosive liquids
Warranty	24 months for manufacturing or material defects
Approval	Compliant with directives 1999/5/EC and 2011/65/EU
Included Open Source software	FreeRTOS version 7.0.1, Contiki

Frequently Asked Questions - Elements motion GIGASET

How to install the Gigaset Elements motion detector?

You can install it either on a foot or fix it to the wall using the supplied adhesive tapes or screws and wall plugs. The optimal location is indicated in the Getting Started leaflet. Make sure the surface is clean, dry and free of grease.

Which battery to use for the motion detector?

Use exclusively a 3.0 V lithium battery type CR123A or CR17345. Damaged batteries must be replaced immediately.

What is the range of the motion detector?

The range is up to 300 meters outdoors and up to 50 meters indoors in a building.

Does the motion detector work with the Gigaset Elements security pack?

Yes, the motion detector is an extension of the Gigaset Elements security pack. This must be previously installed and functional.

How to clean the motion detector?

Wipe the device with a damp cloth or an antistatic cloth. Do not use solvent, microfiber cloth, or dry cloth to avoid static charges.

What to do if the motion detector comes into contact with a liquid?

Disconnect the device or remove the battery. Let the liquid drain, dry it with an absorbent cloth, then place it in a warm and dry place for at least 72 hours before turning it back on.

Where can I install the motion detector?

Install it in a closed, dry room, at a temperature between +5 °C and +45 °C. Avoid humid rooms such as bathroom or shower, and explosive environments.

Is the motion detector guaranteed?

Yes, the warranty is 24 months for manufacturing or material defects. Batteries and wearing parts are guaranteed for 6 months. The warranty does not cover damage due to improper use.

How to claim the warranty?

Contact customer service via www.gigaset-elements.fr/contact with your purchase invoice. Claims must be made within two months of becoming aware of the defect.

Where to find installation support?

Consult the FAQ at www.gigaset-elements.fr/faq or contact customer service by email via the contact form.

USER MANUAL Elements motion GIGASET

Abstract geometric shapes including a circle, square, star, triangle, and donut (no text or symbols)

Gigaset elements

Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.

Copyright (c) 2001-2003, Adam Dunkels.

Copyright (c) 2002-2003, Adam Dunkels.

Copyright (c) 2004, 2008, Swedish Institute of Computer Science.

Copyright (c) 2004, Adam Dunkels and the Swedish Institute of Computer Science.

Copyright (c) 2004, Swedish Institute of Computer Science.

Copyright (c) 2005, Swedish Institute of Computer Science.

Copyright (c) 2006, Swedish Institute of Computer Science.

Copyright (c) 2007, Swedish Institute of Computer Science.

Copyright (c) 2008, Swedish Institute of Computer Science.

Copyright (c) 2009, Swedish Institute of Computer Science.

Copyright (c) 2010, Swedish Institute of Computer Science.

Copyright (c) 2011, Swedish Institute of Computer Science.

Copyright (C) by RTX A/S, Denmark.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Newlib:

Copyright (c) 1990 Regents of the University of California.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.

Copyright (c) 2001-2003, Adam Dunkels.

Copyright (c) 2002-2003, Adam Dunkels.

Copyright (c) 2004, 2008, Swedish Institute of Computer Science.

Copyright (c) 2004, Adam Dunkels and the Swedish Institute of Computer Science.

Copyright (c) 2004, Swedish Institute of Computer Science.

Copyright (c) 2005, Swedish Institute of Computer Science.

Copyright (c) 2006, Swedish Institute of Computer Science.

Copyright (c) 2007, Swedish Institute of Computer Science.

Copyright (c) 2008, Swedish Institute of Computer Science.

Copyright (c) 2009, Swedish Institute of Computer Science.

Copyright (c) 2010, Swedish Institute of Computer Science.

Copyright (c) 2011, Swedish Institute of Computer Science.

Copyright (C) by RTX A/S, Denmark.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Abstract geometric shapes including circles, triangles, stars, and a rounded rectangle (no text or symbols)

Gigaset elements

A31008-N2511-N101-3-7743

Issued by

Gigaset elements GmbH