SLTLWS450 - Towel racks SereneLife - Free user manual and instructions
Find the device manual for free SLTLWS450 SereneLife in PDF.
| Technical Features | Electric towel rack with heating function |
|---|---|
| Dimensions | Not specified |
| Capacity | Can hold multiple towels |
| Material | Stainless steel |
| Power Source | Electric |
| Maximum Temperature | Not specified |
| Usage | Ideal for heating and drying towels in the bathroom |
| Maintenance | Clean with a soft cloth; avoid abrasive products |
| Safety | Equipped with overheating protection |
| General Information | Easy to install; modern and elegant design |
Frequently Asked Questions - SLTLWS450 SereneLife
User questions about SLTLWS450 SereneLife
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Towel racks in PDF format for free! Find your manual SLTLWS450 - SereneLife and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SLTLWS450 by SereneLife.
USER MANUAL SLTLWS450 SereneLife
with Customized Fragrance for Spa and Bathroom, Luxury Towel Heater Gifts for Him & Her, Auto Shut off, Fits 2 large Towels, Blankets, Bathrobes, PJ's
USER MANUAL
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
All safety and operating instructions must be read, adhered to, and followed before operating the unit.
FOR HOUSEHOLD USE ONLY - SAVE THESE INSTRUCTIONS

text_image
Warning sign with yellow triangle and exclamation mark, commonly used for safety alertsDO NOT USE WHILE EMPTY. The red "HOT SURFACE" LED INDICATOR will turn ON to indicate the inside surfaces of the Towel Warmer are hot to the touch. Handle the Towel Warmer carefully when the red "HOT SURFACE" LED INDICATOR is on. The "HOT SURFACE" LED INDICATOR light will turn off when the Towel Warmer has safely cooled down.

text_image
Warning sign depicting a lightning bolt symbol in yellow and black on white backgroundTO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING
To reduce the risk of electric shock, burns, fire, or injury:
- Always unplug the unit from the electrical outlet immediately after using.
- Do not use this appliance for anything other than its intended use.
- Do not place or store the unit where it can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquid.
- Do not reach for a unit that has fallen into water. Unplug it immediately.
- Care should be taken so that objects do not fall into and liquids are not spilled onto the unit.
- This unit should never be left unattended when plugged in.
- Close supervision is necessary when this unit is used near children or disabled persons.
- Use this unit only for its intended use as described in this manual.
- Never operate this unit if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped in water.
- Keep cords away from heated surfaces. Do not wrap the cord around the exterior of the appliance or let the cord hang over the table or counter edge.
-
Do not use outdoors.
-
Do not alter the safety plug or use an extension cord with this device.
- Do not operate with a voltage converter.
- Do not touch hot surfaces.
- Do not use accessory attachments not recommended by the manufacturer as this may cause injuries.
NOTE: The towel warmer has a 3-prong grounding to reduce the risk of electric shock; plug the power cord into a standard 120V electrical outlet that is easily accessible.
CAUTION: To provide continued protection against the risk of electric shock, connect to properly grounded outlets only.
PRODUCT SPECIFICATIONS
- Rated Voltage 120V AC
- Frequency 60Hz
- Wattage Max 210W
• Weight Approx. 5.5 lbs. - Dimensions 13" H x 12" W x 10.4" D
LOCATION OF PARTS AND CONTROLS

text_image
8 7 6 5 4 3 HOLD ON / PRESS OFF 15 30 45 60 HOT SURFACE 1 2- Power Button (Hold ON / Press OFF)
- Timer Button
- Lid
-
60-Minute LED Indicator
-
45-Minute Timer LED Indicator
- 30-Minute Timer LED Indicator
- 15-Minute Timer LED Indicator
- Hot Surface Caution LED Indicator
USING THE TOWEL WARMER
The Towel Warmer is designed to warm one bath towel measuring approximately 40" x 70". For optimal results, use 100% cotton or a cotton blend towel.
-
Place the Towel Warmer on a dry, level, hard surface.
-
Insert the power cord into an electrical outlet.
-
Insert your dry towel(s) inside and replace the lid.
-
Press and hold the POWER BUTTON until the TIMER LED INDICATOR turns on. The TIMER LED INDICATOR will turn blue, indicating that the Towel Warmer is preheating (default timer setting is 15 minutes).
-
Once the Towel Warmer has reached the optimal heating temperature, the TIMER LED INDICATOR turns red. The Towel Warmer will maintain the optimal heating temperature for the remaining timer setting (the timer starts counting down when the TIMER LED INDICATOR turns red).
-
For thorough heating, leave the towel in the Towel Warmer for a few minutes after the TIMER turns off.
-
The Towel Warmer will automatically turn off after the selected timer setting has expired. Press the POWER BUTTON to turn off the Towel Warmer if you wish to do so sooner.
-
The "HOT SURFACE" LED INDICATOR will remain on until the Towel Warmer cools down and it is safe to touch the metal interior.
SELECTING THE TIMER
-
When the Towel Warmer is powered on, it will default to a 15-minute timer.
-
Press the TIMER BUTTON to select the 30-minute timer.
-
Press the TIMER BUTTON again to choose the 45-minute timer.
-
Press the TIMER BUTTON once more to opt for the 60-minute timer.
FREQUENTLY ASKED QUESTIONS
Why won't my Towel Warmer turn on?
Make sure the Towel Warmer is properly plugged into a wall outlet.
Why is my Towel Warmer taking a long time to reach optimal heating temperature?
Be sure to only use dry towels; using damp towels will greatly extend the preheating cycle.
CARE AND MAINTENANCE
- Remove the power cord from the electrical outlet before cleaning.
• Wipe with a dry cloth.
FCC INFORMATION
This device complies with Part 15 of the FCC Rules.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
serenelife™
Questions? Comments?
We are here to help!

text_image
QR code image containing encoded data, no visible human-readable textserenelifehome.com/pages/contactus
serenelife™
SLTLWS350
SLTLWS250 SLTLWS450

text_image
SLTLWS250 SLTLWS450 SERENELIFE HOT SURFACE SERENELIFE HOT SURFACE SERENELIFEtext_image
Warning sign with yellow triangle and exclamation mark, commonly used for safety alertstext_image
Warning sign depicting a lightning bolt symbol in yellow and black on white backgroundPARA REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA, NO RETIRE LA CUBIERTA. NO HAY PIEZAS REPARABLES EN EL INTERIOR. PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA ELÉCTRICA, NO EXPONGA ESTA UNIDAD A LA LLUVIA NI A LA HUMEDAD.
ADVERTENCIA
text_image
QR code image containing encoded data, no visible human-readable textserenelifehome.com/pages/contactus
serenelife™
SLTLWS350
SLTLWS250 SLTLWS450

text_image
SLTLWS250 SLTLWS450 HOT SURFACE SERENELIFE HOT SURFACE SERENELIFE SERENELIFECHAUFFE-SERVIETTES
text_image
Warning sign with yellow triangle and exclamation mark, commonly used for safety alertstext_image
Warning sign depicting a lightning bolt symbol in yellow trianglePOUR RÉDUIRE LE RISQUE DE CHOC ÉLECTRIQUE, NE PAS RETIRER LE COUVERCLE. IL N'Y A AUCUNE PIÈCE RÉPARABLE À L'INTÉRIEUR..
POUR RÉDUIRE LE RISQUE D'INCENDIE OU DE CHOC ÉLECTRIQUE, NE PAS EXPOSER CET APPAREIL À LA PLUIE OU À L'HUMIDITÉ.
AVERTISSEMENT
CARACTÉRISTIQUES DU PRODUIT
Des question? Commentaires?
text_image
QR code image containing encoded data, no visible human-readable textserenelifehome.com/pages/contactus
EasyManual