Hunter 7x50 - Binoculars BRESSER - Free user manual and instructions

Name: Hunter 7x50
Brand: BRESSER
Rating: 7.5 (218 reviews)

Find the device manual for free Hunter 7x50 BRESSER in PDF.

📄 64 pages

EN 💬 AI Question ❓ 9 questions ⚙️ Specs

View the manual :

Manual assistant

Waiting for your message

Product information

Brand : BRESSER

Model : Hunter 7x50

Category : Binoculars

Technical Specifications	Magnification: 7x, Objective Diameter: 50 mm, Field of View at 1000 m: 120 m, Exit Pupil: 7.1 mm, Focusing Distance: 20 m
Usage	Ideal for nature observation, hiking, hunting, and sporting events.
Maintenance and Repair	Clean lenses with a soft cloth, avoid shocks, store in a dry place. In case of issues, contact an authorized repair service.
Safety	Do not look directly at the sun, avoid exposure to extreme temperatures, do not disassemble the device.
General Information	Weight: approximately 800 g, Waterproof: no, Warranty: 2 years, Included accessories: carrying case, strap.

Frequently Asked Questions - Hunter 7x50 BRESSER

How do I clean the lenses of the BRESSER Hunter 7x50 binoculars?

To clean the lenses, use a soft, dry microfiber cloth. Avoid using chemicals or water directly on the lenses.

Are the BRESSER Hunter 7x50 binoculars waterproof?

Yes, the BRESSER Hunter 7x50 binoculars are designed to be water-resistant, but avoid fully submerging them.

How do I adjust the focus of the binoculars?

To adjust the focus, turn the central focusing wheel until the image is clear. If you wear glasses, use the diopter adjustment on the right eyepiece.

What should I do if the images are blurry?

Make sure the focusing wheel is properly adjusted. Also check that the lenses are clean and the binoculars are correctly positioned in front of your eyes.

Are the BRESSER Hunter 7x50 binoculars suitable for night use?

These binoculars perform well in low light conditions but are not specifically designed for night use like night vision binoculars.

How should I store the binoculars properly?

Store the binoculars in their protective case when not in use. Avoid exposing them to extreme temperatures or humidity.

What is the weight of the BRESSER Hunter 7x50 binoculars?

The binoculars weigh approximately 800 grams, making them easy to carry while providing excellent stability.

Is it possible to use the binoculars with glasses?

Yes, the BRESSER Hunter 7x50 binoculars have adjustable eyecups that allow comfortable use with glasses.

What is the warranty on the BRESSER Hunter 7x50 binoculars?

The BRESSER Hunter 7x50 binoculars are generally covered by a 2-year warranty against manufacturing defects.

Download the instructions for your Binoculars in PDF format for free! Find your manual Hunter 7x50 - BRESSER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Hunter 7x50 by BRESSER.

USER MANUAL Hunter 7x50 BRESSER

) to make sure that a chapter applies to your model. Please read this manual carefully and completely before using the binoculars. Your BRESSER Team

= Porro prism model ·

= Roof prism model ·

= Compact model BINOCULARS13

General Safety Informations! RISK of physical injury! Never look through this device directly at or near the sun. There is a risk of BLINDING YOURSELF! Children should only use this device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children. There is a risk of SUFFOCATION. Fire/Burning RISK! Never subject the device - especially the lenses - to direct sunlight. Light ray concentration can cause ﬁres and/or burns. RISK of material damage! Never take the device apart. Please consult your dealer if there are any defects. The dealer will contact our service centre and send the device in for repair if needed. Do not subject the device to temperatures exceeding 60° C!14 List of Parts B Centre axle Ca Twist-up eyecups

Cb Rubber eyecups D Dioptre adjustment E Body of the binoculars F Lens tube G Central focussing wheel H Eyepiece I Objective lens J Threaded tripod connection

1) Image circle with correctly set eye distance

Eyepieces for spectacle wearers

Depending on the model, your binoculars are equipped with either twist-up eyecups (2a) or rubber eyecups (2b). Since there is a larger dis- tance between the binocular eyepiece and the pupil for those wearing glasses, both eyecup varieties can be adjusted individually. Twist-up Eyecups (2a) Screw in the twist-up eyecups (2a) to use the binoculars while wearing glasses. If you are not wearing glasses, unscrew the eyecups to achieve the required distance from the pupils.

Rubber Eyecups (2b) To use the binoculars while wearing glasses, turn the rubber eyecups (2b) towards the sides and down. If you are not wearing glasses, leave the eyecups in the upright position to achieve the required distance from the pupils. Adjusting the eyepiece distance

The distance between the eyes differs between individuals. To achieve perfect interaction be- tween your eyes and the eyepieces of your binoculars set the angle at the centre of the bin- oculars (1) so that you see a circular image (10). Note this setting for later use. Adjusting the focus

Look through your binoculars with your right eye closed. Now adjust the image for your left eye using the centre wheel (6) until it is sharp and BINOCULARS15

clear. Close your left eye and adjust the image for your right eye using the dioptre ring (3) until it too is sharp and clear. Mounting the binoculars on a tripod

Warranty & Service The regular guarantee period is 2 years and begins on the day of purchase. To beneﬁt from an extended voluntary guarantee period as stated on the gift box, registration on our website is required. You can consult the full guarantee terms as well as information on extending the gua- rantee period and details of our services at www.bresser.de/warranty_terms.