79UF8609 - Téléviseur LG - Free user manual and instructions

USER MANUAL 79UF8609 LG

Please read this manual carefully before operating your set and retain it for future reference. www.lg.com Safety and Reference

LED TV** LG LED TV applies LCD screen with LED backlights. *MFL68780132* P/NO : MFL68780132 (1503-REV02)Printed in Korea2 ENGLISH Safety instructions Please read these safety precautions carefully before using the product. WARNING Do not place the TV and/or remote control in the following environments: tA location exposed to direct sunlight tAn area with high humidity such as a bathroom tNear any heat source such as stoves and other devices that produce heat tNear kitchen counters or humidi ers where they can easily be exposed to steam or oil tAn area exposed to rain or wind tNear containers of water such as vases Otherwise, this may result in re, electric shock, malfunction or product deformation. Do not place the product where it might be exposed to dust. This may cause a re hazard. Mains Plug is the TV connecting/disconnecting device to AC mains electric supply. This plug must remain readily attached and operable when TV is in use. Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust o . You may be electrocuted due to excess moisture. Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured. Insert power cable plug completely into wall socket otherwise if not secured completely into socket, re ignition may break out. Ensure the power cord does not come into contact with hot objects such as a heater. This may cause a re or an electric shock hazard. Do not place a heavy object, or the product itself, on power cables. Otherwise, this may result in re or electric shock. Bend antenna cable between inside and outside building to prevent rain from owing in. This may cause water damaged inside the Product and could give an electric shock. When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock / re hazard. Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in re due to over-heating.ENGLISH

Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. Desiccant Keep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suocation. Keep it out of the reach of children. Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury. Dispose of used batteries carefully to ensure that a small child does not consume them. Please seek Doctor- Medical Attention immediately if child consumes batteries. Do not insert any metal objects/conductors (like a metal chopstick/ cutlery/screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted. (Depending on model) Do not put or store inammable substances near the product. There is a danger of combustion/explosion or re due to careless handling of the inammable substances. Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inammable objects such as paper and matches. Children must pay particular attention. Electrical shock, re or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre. Do not spray water on the product or scrub with an inammable substance (thinner or benzene). Fire or electric shock accident can occur. Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen. You may be injured or the product can be damaged. Never touch this product or antenna during a thunder or lighting storm. You may be electrocuted. Never touch the wall outlet when there is leakage of gas, open the windows and ventilate. It may cause a re or a burn by a spark. Do not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair.4 ENGLISH If any of the following occur, unplug the product immediately and contact your local service centre. tThe product has been impacted by shock tThe product has been damaged tForeign objects have entered the product tThe product produced smoke or a strange smell This may result in re or electric shock. Unplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time. Accumulated dust can cause re hazard and insulation deterioration can cause electric leakage/shock/re. Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be placed on the apparatus. Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall. If water enters or comes into contact with TV, AC adapter or power cord please disconnect the power cord and contact service centre immediately. Otherwise, this may result in electric shock or re. Only use an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in re, electric shock, malfunction or product deformation. Never Disassemble the AC adapter or power cord. This may result in re or electric shock. CAUTION Install the product where no radio wave occurs. There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. Do not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported. Otherwise, the product may fall or ip over, which may cause injury or damage to the product. If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury. If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), x it carefully so as not to drop. Only use the attachments / accessories specied by the manufacturer. When installing the antenna, consult with a qualied service technician. If not installed by a qualied technician, this may create a re hazard or an electric shock hazard.ENGLISH

We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision. Only use the specied type of battery. This could cause damage to the remote control. Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak. Batteries should not be exposed to excessive heat. For example, keep away from direct Sunlight , open replace and electric heaters. Do not place non-rechargeable batteries in charging device. Make sure there are no objects between the remote control and its sensor. Signal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, uorescent lighting. If this occurs turn o lighting or darken viewing area. When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product. Do not turn the product On/O by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. Please follow the installation instructions below to prevent the product from overheating. tThe distance between the product and the wall should be more than 10cm. tDo not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard). tDo not install the product on a carpet or cushion. tMake sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in re. Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not aect the operation or performance of the product. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Prevent dust collecting on the power plug pins or outlet. This may cause a re hazard. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.6 ENGLISH Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may causedamage to screen. Avoid touching the screen or holding your nger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen. When cleaning the product and its components, unplug the power rst and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in re, electric shock or product damage (deformation, corrosion or breakage). As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn o this unit by SWITCH. When unplugging the cable, grab the plug and unplug it, by pulling at the plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous. When moving the product, make sure you turn the power o rst. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a re hazard or cause electric shock. When moving or unpacking the product, work in pairs because the product is heavy. Otherwise, this may result in injury. Contact the service centre once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. If the product feels cold to the touch, there may be a small “icker” when it is turned on. This is normal, there is nothing wrong with product. The panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1ppm on the panel. This does not indicate a malfunction and does not aect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.ENGLISH

You may nd dierent brightness and color of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction. Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking. Avoid displaying a xed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma). Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel. This phenomenon also occurs in third-party products and is not subject to exchange or refund. Generated Sound “Cracking” noise: A cracking noise that occurs when watching or turning o the TV is generated by plastic thermal contraction due to tempera- ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not aect the performance and reliability of the product. Do not use high voltage electrical goods near the TV (e.g. electric mosquito-swatter). This may result in product malfunction. Viewing 3D imaging (Only 3D models) WARNING Viewing environment tViewing Time - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness tSome users may experience a seizure or other abnormal symptoms when they are exposed to a ashing light or particular pattern from 3D contents. tDo not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc. t3D Contents are not recommended to those who suer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced. tIf you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult. tIf your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D contents. Symptoms which require discontinuation or refraining from watching 3D contents tDo not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking. tWhen these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides. - Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.8 ENGLISH CAUTION Viewing environment tViewing Distance - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing age tInfants/Children - Usage/ Viewing 3D contents for children under the age of 6 are prohibited. - Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it.) Special monitoring and extra attention is required for children watching 3D contents. - Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than that of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image. tTeenagers - Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents. Advise them to refrain from watching 3D contents for a long time when they are tired. tElderly - The elderly may perceive less 3D eect compared to the young. Do not sit closer to the TV than the recommended distance. Cautions when using the 3D glasses tMake sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. tDo not use 3D glasses instead of your normal glasses, sunglasses or protective goggles. tUsing modied 3D glasses may cause eye strain or image distortion. tDo not keep your 3D glasses in extremely high or low temperatures. It will cause deformation. tThe 3D glasses are fragile and are easily scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals. Preparing NOTE tIf the TV is turned on for the rst time after it was shipped from the factory, initialization of the TV may take a few minutes. tImage shown may dier from your TV. tYour TV’s OSD (On Screen Display) may dier slightly from that shown in this manual. tThe available menus and options may dier from the input source or product model that you are using. tNew features may be added to this TV in the future. tThe TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned o if it will not be watched for some time, as this will reduce energy consumption. tThe energy consumed during use can be signicantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. tThe items supplied with your product may vary depending on the model. tProduct specications or contents of this manual may be changed without prior notice due to upgrade of product functions. tFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not t into your TV’s USB port.

18 mm tUse a certied cable with the HDMI logo attached. tIf you do not use a certied HDMI cable, the screen may not display or a connection error may occur. (Recommended HDMI Cable Types) - High-Speed HDMI®/

Cable (3 m or less) - High-Speed HDMI®/

Cable with Ethernet (3 m or less)ENGLISH

CAUTION tDo not use any unapproved items to ensure the safety and product life span. tAny damage or injuries caused by using unapproved items are not covered by the warranty. tSome models have a thin lm attached on to the screen and this must not be removed. tDo not remove the panel with your ngers or any tools. Doing so may damage the product. (Only UF95**) tWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or at surface to protect the screen from scratches. tMake sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly. Separate purchase Separate purchase items can be changed or modied for quality improvement without any notication. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies. (Depending on model) AG-F*** Cinema 3D Glasses AN-MR600 Magic Remote AG-F***DP Dual Play Glasses AN-VC550 Smart camera LG Audio Device Maintenance Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. tMake sure to turn the power o and disconnect the power cord and all other cables rst. tWhen the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen, frame, cabinet and stand To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth. tAvoid touching the screen at all times, as this may result in damage to the screen. tDo not push, rub, or hit the screen surface with your ngernail or a sharp object, as this may result in scratches and image distortions. tDo not use any chemicals as this may damage the product. tDo not spray liquid onto the surface. If water enters the TV, it may result in re, electric shock, or malfunction. Power cord Remove the accumulated dust or dirt on the power cord regularly.10 ENGLISH Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. tIt is recommended to move the TV in the box or packing material that the TV originally came in. tBefore moving or lifting the TV, disconnect the power cord and all cables. tWhen holding the TV, the screen should face away from you to avoid damage. tHold the top and bottom of the TV frame rmly. Make sure not to hold the transparent part, speaker, or speaker grill area. tWhen transporting a large TV, there should be at least 2 people. tWhen transporting the TV by hand, hold the TV as shown in the following illustration. tWhen transporting the TV, do not expose the TV to jolts or excessive vibration. tWhen transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. tDo not apply excessive pressure to cause exing /bending of frame chassis as it may damage screen. tWhen handling the TV, be careful not to damage the protruding joystick button. CAUTION tAvoid touching the screen at all times, as this may result in damage to the screen. tDo not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur. Using the joystick button (Image shown may dier from your TV.) You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right. Joystick Button Basic functions Power On When the TV is turned o, place your nger on the joystick button and press it once and release it. Power O When the TV is turned on, place your nger on the joystick button and press it once for a few seconds and release it. All running apps will close, and any recording in progress will stop. Volume Control If you place your nger over the joystick button and move it left or right, you can adjust the volume level you want. Programmes Control If you place your nger over the joystick button and move it up or down, you can scrolls through the saved programmes you want. Adjusting the menu When the TV is turned on, press the joystick button one time. You can adjust the Menu items moving the joystick button up, down, left or right. Turns the power o. Clears on-screen displays and returns to TV viewing. Changes the input source. Accesses the Quick Settings. NOTE tWhen your nger over the joystick button and push it to the up, down, left or right, be careful not to press the joystick button. If you press the joystick button rst, you may not be able to adjust the volume level and saved programmes.ENGLISH

Mounting on a table (Depending on model)1 Lift and tilt the TV into its upright position on a table. tLeave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm10 cm10 cm 10 cm 2 Connect the power cord to a wall outlet. CAUTIONtDo not place the TV near or on sources of heat, as this may result in re or other damage. Using the kensington security system (This feature is not available for all models.)tImage shown may dier from your TV.The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table. Securing the TV to a wall (This feature is not available for all models.)1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. tIf there are bolts inserted at the eye-bolts position, remove the bolts rst.2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the at surface. CAUTIONtMake sure that children do not climb on or hang on the TV. NOTEtUse a platform or cabinet that is strong and large enough to support the TV securely.tBrackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer. Mounting on a wall Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the oor. When you attach the TV to other building materials, please contact qualied personnel. LG recommends that wall mounting be performed by a qualied professional installer. We recommend the use of LG’s wall mount bracket. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. 10 cm 10 cm10 cm10 cm12 ENGLISH Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. Separate purchase (Wall mounting bracket) Model 43UF69** 40/43UF77** 40/43UF80** 49UF69** 49/55UF77** 49/55UF80** 49/55UF85** 55UF86** 55UF95** 55UG87** VESA (A x B) 200 x 200 300 x 300 Standard screw M6 M6 Number of screws 4 4 Wall mount bracket LSW240B MSW240 LSW350B MSW240 Model 60/65UF77** 60/65UF80** 60/65UF85** 65UF86** 65UF95** 65UG87** 70UF77** 79UF86** VESA (A x B) 300 x 300 600 x 400 Standard screw M6 M8 Number of screws 4 4 Wall mount bracket LSW350B LSW640B

CAUTION tDisconnect the power rst, and then move or install the TV. Otherwise electric shock may occur. tRemove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. tIf you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorised LG wall mount and contact the local dealer or qualied personnel. tDo not over tighten the screws as this may cause damage to the TV and void your warranty. tUse the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTE tUse the screws that are listed on the VESA standard screw specications. tThe wall mount kit includes an installation manual and necessary parts. tThe wall mount bracket is not provided. You can obtain additional accessories from your local dealer. tThe length of screws may dier depending on the wall mount. Make sure to use the proper length. tFor more information, refer to the manual supplied with the wall mount. tWhen installing the wall mounting bracket, use the adhesive label provided. The adhesive label will protect the opening from accumulating dust and dirt. (Only when the label is provided) Provided item Adhesive label tWhen attaching a wall mounting bracket to the TV, insert the wall mount spacers into the TV wall mount holes to adjust the vertical angle of the TV. (Only when the item of the following form is provided) Provided Item Wall Mount Spacer tWhen removing the stand cover, insert a at tool as shown. (e.g., a at screwdriver) (Only 79UF86**) Flat toolENGLISH

Connections (notications) Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTE tThe external device connection may dier from the model. tConnect external devices to the TV regardless of the order of the TV port. tIf you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device. tRefer to the external equipment’s manual for operating instructions. tIf you connect a gaming device to the TV, use the cable supplied with the gaming device. tIn PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. tIn PC mode, some resolution settings may not work properly depending on the graphics card. tIf ULTRA HD content is played on your PC, video or audio may become disrupted intermittently depending on your PC’s performance. (Depending on model) Antenna connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). tUse a signal splitter to use more than 2 TVs. tIf the image quality is poor, install a signal amplier properly to improve the image quality. tIf the image quality is poor with an antenna connected, try to realign the antenna in the correct direction. tAn antenna cable and converter are not supplied. tSupported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC tFor a location that is not supported with ULTRA HD broadcasting, this TV cannot receive ULTRA HD broadcasts directly. This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been conrmed. (Depending on model) Satellite dish connection (Only satellite models) Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). Euro scart connection (Depending on model) Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable. Output Type Current input mode AV1 (TV Out

Digital TV Digital TV Analogue TV, AV Analogue TVComponent HDMI 1 TV Out : Outputs Analogue TV or Digital TV signals. tAny Euro scart cable used must be signal shielded. tWhen watching digital TV in 3D imaging mode, only 2D out signals can be output through the SCART cable. (Only 3D models) tIf you use the Time Machine function on digital TV, TV out signals cannot be output through the SCART cable. CI module Connection (Depending on model) View the encrypted (pay) services in digital TV mode. tCheck if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. tIf the TV does not display any video and audio when CI+ CAM is connected, please contact to the Terrestrial/Cable/Satellite Service Operator. Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided.

Picture HDMI ULTRA HD Deep Colour - On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0) - Off : Support 4K @ 50/60 Hz (4:2:0) If the device connected to Input Port also supports ULTRA HD Deep Colour, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, connect the device to a dierent HDMI port or change the TV’s HDMI ULTRA HD Deep Colour setting to Off. (This feature is available on certain models which are supported ULTRA HD Deep Colour only.)14 ENGLISH Remote control The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTIONtDo not mix old and new batteries, as this may damage the remote control.tThe remote control will not be included for all sales market.Make sure to point the remote control toward the remote control sensor on the TV.(Depending on model) FAV

(POWER) Turns the TV on or o. Changes the input source. / (Q. Settings) Accesses the Quick Settings. Views the information of the current programme and screen. Recalls your preferred subtitle in digital mode. Selects Radio, TV and DTV programme.Number buttons Enters numbers. Shows programme guide. (Space) Opens an empty space on the screen keyboard. Returns to the previously viewed programme. Adjusts the volume level. Accesses your favourite programme list. Used for viewing 3D video. Mutes all sounds. Scrolls through the saved programmes. Moves to the previous or next screen. Shows the previous history. (HOME) Accesses the Home menu. Shows the list of Recommended, Programmes, Search and Recorded. (Depending on model)

Teletext buttons ( / ) These buttons are used for teletext.Navigation buttons (up/down/left/right) Scrolls through menus or options. Selects menus or options and conrms your input. Returns to the previous level. Clears on-screen displays and returns to TV viewing. By Pressing AD button, audio descriptions function will be enabled. Starts to record and displays record menu. (Only Time MachineReady supported model) (Depending on model)Control buttons () Controls the Premium contents, Time MachineReady or SmartShare menus or the SIMPLINK compatible devices (USB or SIMPLINK or Time MachineReady Coloured buttons These access special functions in some menus. : Red, : Green, : Yellow, : Blue)ENGLISH

Views the information of the current programme and screen. (Depending on model)

Resizes an image. (Depending on model) (User Guide) Sees user- guide. Number buttons Enters numbers. (Space) Opens an empty space on the screen keyboard. Shows programme guide. Returns to the previously viewed programme.

Adjusts the volume level. Accesses your favourite programme list.

Views the information of the current programme and screen. (Depending on model) Mutes all sounds. Scrolls through the saved programmes. Moves to the previous or next screen.

Shows the previous history. (HOME) Accesses the Home menu. Shows the list of Apps. Navigation buttons (up/down/left/right) Scrolls through menus or options. Selects menus or options and conrms your input. Returns to the previous level. Shows the list of Recommended, Programmes, Search and Recorded. (Depending on model) Clears on-screen displays and returns to TV viewing.

Coloured buttons These access special functions in some menus. ( : Red, : Green, : Yellow, : Blue) Teletext buttons ( / ) These buttons are used for teletext. Selects the MHP TV menu source. (Depending on model) Returns to LIVE TV. Control buttons ( ) Controls the Premium contents, Time Machine Ready or SmartShare menus or the SIMPLINK compatible devices (USB or SIMPLINK or Time Machine Ready

Starts to record and displays record menu. (Only Time Machine Ready supported model) (Depending on model) Recalls your preferred subtitle in digital mode. By Pressing AD button, audio descriptions function will be enabled. Selects Radio, TV and DTV programme.16 ENGLISH Magic remote functions (Depending on model)When the message “Magic remote battery is low. Change the battery.” is displayed, replace the battery.To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching the and ends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. CAUTIONtDo not mix old and new batteries, as this may damage the remote control.

(POWER) Turns the TV on or o. (INPUT) Changes the input source.* Pressing and holding the button displays all the lists of exter-nal inputs.Number buttons Enters numbers. Accesses the saved programmes list. (Space) Opens an empty space on the screen keyboard. Views the information of the current programmes and screen. Adjusts the volume level. Scrolls through the saved programmes.(MUTE) Mutes all sounds. * By Pressing and holding the button, video/audio descriptions function will be enabled. (Depending on model) (HOME) Accesses the Home menu. (BACK) Returns to the previous screen. Clears on-screen displays and returns to Last Input viewing. GUIDEEXIT TEXT T.OPTSUBT.

Wheel (OK) Press the center of the Wheel button to select a menu. You can change programmes by using the Wheel button. (up/down/left/right) Press the up, down, left or right button to scroll the menu. If you press buttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right. Shows programme guide. (Screen Remote) Displays the Screen Remote. * Accesses the Universal Control Menu. (Depending on model) Used for viewing 3D video. (Only 3D models) (Voice recognition) (Depending on model)Network connection is required to use the voice recognition function.1 Press the voice recognition button.2 Speak when the voice display window appears on the TV screen.tUse the Magic Remote no further than 10 cm from your face.tThe voice recognition may fail when you speak too fast or too slowly.t The recognition rate may vary depending on the user’s characteristics (voice, pronunciation, intonation, and speed) and the environment (noise and TV volume). (Q. Settings) Accesses the Quick Settings.* Pressing and holding the button displays the Advanced menu.Coloured buttons These access special functions in some menus. : Red, : Green, : Yellow, : Blue)Teletext buttons (

These buttons are used for teletext. Recalls your preferred subtitle in digital mode.ENGLISH

Registering magic remote How to register the magic remote To use the Magic Remote, rst pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

• If the TV fails to register the Magic Remote, try again after turning the TV o and back on. How to deregister the magic remote Press the (BACK) and (HOME) buttons at the same time, for ve seconds, to unpair the Magic Remote with your TV.

• Pressing and holding the button will let you cancel and re-reg- ister Magic Remote at once. How to use magic remote tShake the Magic Remote slightly to the right and left or press (HOME), (INPUT), buttons to make the pointer appear on the screen. (In some TV models, the pointer will appear when you turn the Wheel (OK) button.) t If the pointer has not been used for a certain period of time or Magic Remote is placed on a at surface, then the pointer will disappear. t If the pointer is not responding smoothly, you can reset the pointer by moving it to the edge of the screen. t The Magic Remote depletes batteries faster than a normal remote due to the additional features. Precautions to take when using the magic remote tUse the remote control within the specied range (within 10 m). You may experience communication failures when using the device outside the coverage area or if there are obstacles within the coverage area. tYou may experience communication failures depending on the accessories. Devices such as a microwave oven and wireless LAN operate in the same frequency band (2.4 GHz) as the Magic Remote. This may cause communication failures. tThe Magic Remote may not work properly if a wireless router (AP) is within 1 meter of the TV. Your wireless router should be more than 1 m away from the TV. tDo not disassemble or heat the battery. tDo not drop the battery. Avoid extreme shocks to the battery. tInserting the battery in the wrong way may result in explosion. Licenses Supported licenses may dier by model. For more information about licenses, visit www.lg.com. Open source software notice information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource. lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@ lge.com. This oer is valid for three (3) years from the date on which you purchased the product.18 ENGLISH Troubleshooting Cannot control the TV with the remote control. tCheck the remote control sensor on the product and try again. tCheck if there is any obstacle between the product and the remote control. tCheck if the batteries are still working and properly installed ( to , to ). No image display and no sound is produced. tCheck if the product is turned on. tCheck if the power cord is connected to a wall outlet. tCheck if there is a problem in the wall outlet by connecting other products. The TV turns o suddenly. tCheck the power control settings. The power supply may be interrupted. tCheck if the Automatic Standby (Depending on model) / Sleep Timer / Timer Power Off is activated in the Timers settings. tIf there is no signal while the TV is on, the TV will turn o automatically after 15 minutes of inactivity. When connecting to the PC (HDMI), ‘No signal’ or ‘Invalid Format’ is displayed. tTurn the TV o/on using the remote control. tReconnect the HDMI cable. tRestart the PC with the TV on. Specications Wireless module specification tBecause band channel used by the country could be dierent, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. tThis device should be installed and operated with minimum distance 20 cm between the device and your body. And this phrase is for the general statement for consideration of user environment.

JMQSPEPUUPFJMTVPQBOOFMMP$JÛQPUSFCCFDPNQPSUBSFJMSJTDIJP

BODPSBJOGBTFEJTWJMVQQPBEFTFNQJPQPTTPOPQSPWBSFBUPDDBSF

JMMJWFMMPEJMVNJOPTJUËEFMMJNNBHJOF*OUBMNPEPTJSJEVDPOPBODIF

$POTFOUFEJTQFHOFSFJM57

$POTFOUFEJSFHPMBSFJMMJWFMMPEFMWPMVNF $POTFOUFEJBDDFEFSFBMMFMFODPEJDBOBMJQSFGFSJUJ

$POTFOUFEJWFEFSFWJEFP%*OCBTFBMNPEFMMP

(CASA) $POTFOUFEJBDDFEFSFBMNFOV$BTB

$POTFOUFEJWJTVBMJ[[BSFMFMFODP$POTJHMJBUJ1SPHSBNNB

3FBEZ TVQQPSUBUP*OCBTF BMNPEFMMP $POTFOUFEJWJTVBMJ[[BSFJTPUUPUJUPMJQSFGFSJUJJOPEBMJUË EJHJUBMF

-FMJDFO[FTVQQPSUBUFQPTTPOPWBSJBSFEBVONPEFMMPBMMBMUSP1FS

4QFDJöDIFEFMNPEVMPXJSFMFTT-(4#8 -"/XJSFMFTT#MVFUPPUI

QJSBUFBEPTOÍPFTUÍPBCSBOHJEPTQFMBHBSBOUJB

t"MHVOTNPEFMPTJODMVFNVNBQFMÓDVMBöOBOPFDSÍFFTUBOÍPEFWF TFSSFNPWJEB t/ÍPSFNPWBPQBJOFMDPNPTEFEPTOFNDPNRVBMRVFSGFSSBNFOUB 4FPö[FSQPEFEBOJöDBSPQSPEVUP"QFOBT6' t"PöYBSB57OPTVQPSUFDPMPRVFPFDSÍWJSBEPQBSBCBJYPTPCSF VNBNFTBBMNPGBEBEBPVVNBTVQFSGÓDJFQMBOBEFGPSNBB QSPUFHFSPFDSÍDPOUSBSJTDPT t$FSUJöRVFTFEFRVFPTQBSBGVTPTFTUÍPDPSSFDUBNFOUFJOTFSJEPTF

EFWJEBNFOUFBQFSUBEPT4FOÍPGPSFNEFWJEBNFOUFBQFSUBEPT

3FQSPEVÎÍPEVQMB AN-VC550 $ÉNBSB4NBSU %JTQPTJUJWPÈVEJP EB-( Manutenção Limpar a TV -JNQFSFHVMBSNFOUFB57QBSBNBOUFSPNFMIPSEFTFNQFOIPF QSPMPOHBSBWJEBÞUJMEPBQBSFMIP t/ÍPTFFTRVFÎBEFQSJNFJSPEFTMJHBSBBMJNFOUBÎÍPFEFTMJHBSP

VNMPOHPQFSÓPEPEFUFNQPEFTMJHVFPDBCPEFBMJNFOUBÎÍPEB

Programme coverage VHF, UHF, C-Band*, Ku-Band* VHF: E2 to E12 UHF : E21 to E69 CATV: S1 to S20 HYPER: S21 to S47 Maximum number of storable programmes 6,000 1,500 External antenna impedance 75 Ω

• Only DVB-T2/C/S/S2 support models.S-2 Regulatory LG Recycling Policy (Only EU) LG Electronics oers a customized e-waste take-back & recycling service that meets local needs and requirements in the countries where e-waste regulations are in place, and also provides product and packaging take-back & recycling service voluntarily in some countries. LG Electronics evaluates products’ recyclability at the design step using LG’s recyclability evaluation tool, with the goal of improving recyclability where practicable. Through these activities, LG seeks to contribute to conserving natural resources and protecting the environment. For more information about the LG Recycling Policy, please visit our global site at http://www.lg.com/global/sustainability/environment/take-back- recycling Energy Saving Energy eciency cuts energy consumption and thus saves money by reducing electricity bills. The following indications allow to reduce power consumption when the television is not being watched: tTurning the television o at its mains supply, or un-plugging it, will cut energy use to zero for all televisions, and is recommended when the television is not being used for a long time, e.g. when on holiday, tPutting the television into standby mode, will reduce energy consumption, but will still draw some power, tReducing the brightness of the screen will reduce energy use. Isolator (Only Sweden, Norway) t“Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a re hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)” t“Utrustning som är kopplad till skyddsjord via jordat vägguttag och/eller via annan utrustning och samtidigt är kopplad till kabel-TV nät kan i vissa fall medföra risk för brand. För att undvika detta skall vid anslutning av utrustningen till kabel-TV nät galvanisk isolator nnas mellan utrustningen och kabel-TV nätet.” t“Utstyr som er koplet til beskyttelsesjord via nettplugg og/eller via annet jordtilkoplet utstyr - og er tilkoplet et kabel-TV nett, kan forårsake brannfare. For å unngå dette skal det ved tilkopling av utstyret til kabel-TV nettet installeres en galvanisk isolator mellom utstyret og kabel-TV nettet.”S-3 EU ecolabel (Only EU ecolabel applied model) Better for the environment... tHigh Energy Eciency tReduced CO2 emissions tDesigned to facilitate repair and recycling ... better for you. EU Ecolabel : PL/22/004 LGE announced the ‘LG Declaration for a Cleaner Environment ‘in 1994, and this ideal has served as a Guiding managerial principle ever since. The Declaration is a foundation that has allowed us to undertaike Environmentally friendly activities in careful consideration of economic, environmental, and social aspects. We promote activities for environmental preservation, and we specically develop our products to embrace the Concept of environment- friendly through whole process from getting raw materials, production, transportation, usage and end-of-life. These environmental characteristics are endorsed by the award of the European Commission as approval of the product environmental status for energy saving. Facilities for recycling and a host of other features. The full list of criteria and more information on the eco label can be found at the web-site address : http://www.ecolabel.eu Restriction of Hazardous Substances (Only Ukraine) Обмеження України на наявність небезпечних речовин tThe equipment complies with requirements of the Technical Regulation, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment. tУстаткування відповідає вимогам технічного регламенту щодо обмеженного використання небезпечних речовин в електричному і електронному обладнанні. Packing Information (Only Russia, Kazakhstan, Belarus)