E2411PU - Moniteur LG - Free user manual and instructions

USER MANUAL E2411PU LG

OWNER’S MANUAL LCD MONITOR LCD MONITOR MODEL E

2211PU E 2411PU Please read this manual carefully before operating your set and

retain it for future reference.

This unit has been engineered and manufactured to ensure your personal safety,

however improper use may result in potential electrical shock or fire hazards. In

order to allow the proper operation of all safeguards incorporated in this display,

observe the following basic rules for its installation, use, and servicing.

Use only the power cord supplied with the unit. In case you use another power

cord, make sure that it is certified by the applicable national standards if not being

provided by the supplier. If the power cable is faulty in any way, please contact the

manufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnection device. Ensure that the

socket-outlet is easily accessible after installation.

Operate the display only from a power source indicated in the specifications of this

manual or listed on the display. If you are not sure what type of power supply you

have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power

cords and broken plugs. They may result in a shock or fire hazard. Call your

service technician for replacement.

As long as this unit is connected to the AC wall outlet, it is not disconnected from

the AC power source even if the unit is turned off.

Do not Open the Display:

There are no user serviceable components inside.

There are Dangerous High Voltages inside, even when the power is OFF.

Contact your dealer if the display is not operating properly.

To Avoid Personal Injury :

Do not place the display on a sloping shelf unless properly secured.

Use only a stand recommended by the manufacturer.

Do not drop an object on or apply impact to the product. Do not throw any toys

or objects on the product screen.

It can cause injury to human, problem to product and damage the display.

To Prevent Fire or Hazards:

Always turn the display OFF if you leave the room for more than a short period

of time. Never leave the display ON when leaving the house.

Keep children from dropping or pushing objects into the display's cabinet

openings. Some internal parts carry hazardous voltages.

Do not add accessories that have not been designed for this display.

When the display is to be left unattended for an extended period of time, unplug

it from the wall outlet.

In the presence of thunder and lightning, never touch the power cord and signal

cable because it can be very dangerous. It can cause electric shock.

Important Precautions2

Important Precautions

Do not allow anything to rest upon or roll over the power cord, and do not place the

display where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool.

Displays are provided with ventilation openings in the cabinet to allow the release

of heat generated during operation. If these openings are blocked, built-up heat

can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.

Place the display in a built-in enclosure unless proper ventilation is provided.

Cover the openings with cloth or other material.

Place the display near or over a radiator or heat source.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,

mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause

Some dot defects may appear as Red, Green or Blue spots on the screen.

However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for

your LCD display. If used under any mode except the recommended resolution,

some scaled or processed images may appear on the screen. However, this is

characteristic of the fixed-resolution LCD panel.

Leaving a fixed image on the screen for a long time may cause damage to the

screen and cause image burn-in. Make sure to use a screen saver on the product.

Burn-in and related problems are not covered by the warranty on this product.

Do not shock or scratch the front and sides of the screen with metallic objects.

Otherwise, it may cause damage to the screen.

Make sure the panel faces forward and hold it with both hands to move. If you

drop the product, the damaged product can cause electric shock or fire. Contact

an authorized the service center for repair.

Avoid high temperatures and humidity.

For displays with glossy bezels the user should consider the placement of the

display as the bezel may cause disturbing reflections from surrounding light and

bright surfaces.Important Precautions

Unplug the display before cleaning the face of the display screen.

Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display

screen because over-spraying may cause electrical shock.

When cleaning the product, unplug the power cord and scrub gently with a soft

cloth to prevent scratching. Do not clean with a wet cloth or spray water or other

liquids directly onto the product. An electric shock may occur. (Do not use

chemicals such as benzene, paint thinners or alcohol)

Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;

wipe in one direction only. Too much moisture may cause staining.

Do not throw away the carton and packing materials. They make an ideal

container in which to transport the unit. When shipping the unit to another

location, repack it in its original material.

Do not dispose of this product with general household waste.

Disposal of this product must be carried out in accordance to the regulations of

your local authority.4

!!! Thank for selecting LGE products !!!

Please make sure the following items are included with your

monitor. If any items are missing, contact your dealer.

15-pin D-Sub Signal Cable

(To set it up, this signal cable may be

attached to this product before

(This feature is not available in all

NOTE This accessories may look different from those shown here.

User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite

cores to maintain standard compliance for the product.

USB CableConnecting the Display E2211PU

Before setting up the monitor, ensure that the power to the monitor,

the computer system, and other attached devices are turned off.

Connecting the stand base

1. Place the monitor with its front facing downward on a cushion or soft cloth.

Assemble the Stand Base into the Stand Body.

Be sure don't pull out the Stop Pin and make the Stand Base direction as shown.

WARNING The tape and locking pin may only be removed from those monitors equipped with astanding base when the base is pulled up. Otherwise, you may be injured by the protrudingsections of the stand.Product Handling with Care : When you lift up or move the product, Do Not hold or touch thefront part of LCD panel. It will damage the panel. (Please hold the Stand Body or plastic cover ofthe product.) Stand Base

Connecting the Display E2211PU IMPORTANT This illustration depicts the general model of connection. Your monitor may differ from the items

shown in the picture.

Do not carry the product upside down holding only the stand base. The product may fall and get

damaged or injure your foot.

3. Use a coin on the back of the stand base and turn the screw clockwise to tighten.

Lift and turn the monitor to face towards the front after the connection is

made to the female part of the cable you're attaching.

Removing the stand base

1. Place the monitor with its front facing downward on a cushion or soft cloth.

2. When you desire to disintegrate the monitor from the stand base, use a coin to turn the

screw counterclockwise.7

Connecting the Display E2411PU Before setting up the monitor, ensure that the power to the monitor,

the computer system, and other attached devices are turned off.

Connecting the stand base

1. Place the monitor with its front facing downward on a cushion or soft cloth.

2. Assemble the Stand Base into the Stand Body.

Be sure don't pull out the Stop Pin and make the Stand Base direction as shown.

WARNING The tape and locking pin may only be removed from those monitors equipped with astanding base when the base is pulled up. Otherwise, you may be injured by the protrudingsections of the stand. Product Handling with Care : When you lift up or move the product, Do Not hold or touch the front part of LCD panel. It will damage the panel. (Please hold the Stand Body or plastic cover ofthe product.) Stand Base

3. Once assembled take the monitor up carefully and face the front side.8

Connecting the Display E2411PU IMPORTANT This illustration depicts the general model of connection. Your monitor may differ from the items

shown in the picture.

Do not carry the product upside down holding only the stand base. The product may fall and get

damaged or injure your foot.

Removing the stand base

1. Place the monitor with its front facing downward on a cushion or soft cloth.

2. While pressing the latches, push the stand base in the direction of the arrow to separate

from the stand body.9

Connecting the Display

Height Range : maximum 4.33 inches (110.0 mm) * Please be sure to remove the Locking pin to adjust the height. 110.0 mm Positioning your display

After installation, adjust the angle as shown below.

1. Adjust the position of the panel in various ways for maximum comfort.

Swivel Range : 356˚10

Connecting the Display

t is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt

angle of the monitor should not exceed 5 degrees.

WARNING You do not need to replace the Locking pin after it is removed, to adjust its height.

When adjusting the angle of the screen, do not put your finger(s) in

between the head of the monitor and the stand body. You can hurt your

When adjusting the height of the screen, do not put your finger(s) in

between the head of the monitor and the stand base. You can hurt your

Connecting the Display

-The pivot function allows you to rotate the screen 90 degrees clockwise.

Lift the monitor to its highest height to utilize the Pivot function.

2. Landscape & Portrait : You can rotate the panel 90

Please be cautious and avoid contact between the monitor head and the

Stand Base when rotating the screen to access the Pivot function. If the

monitor head touches the Stand Base, then the Stand Base could crack.

Be careful with the cables when rotating the screen.

Connecting the Display

A B Connect DVI-D(Digital signal) Cable

Connect D-sub(Analog signal) Cable

1. Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.

Connect signal input cable and power cord in order, then tighten the screw

of the signal cable.

Connecting with the PC

2 Wall-outlet typeMac adapter : For Apple Macintosh use, aseparate plug adapter is needed to change the15 pin high density (3 row) D-sub VGAconnector on the supplied cable to a 15 pin 2row connector.When using a D-Sub signal input cableconnector for Macintosh Varies according to model.DVI-D (This feature is not available in all countries.) NOTE This is a simplified representation of the rear view.This rear view represents a general model; your display may differ from the view as shown.Connect the signalinput cable and tightenit up by turning in thedirection of the arrowas shown in the figure.

C Connect Audio Cable13

Connecting the Display

‘ Self Image Setting Function’? This function provides the user with optimal display

settings.When the user connects the monitor for the first time, this function automatically adjusts

the display to optimal settings for individual input signals.

‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen

flicker or tilted screen while using the device or after changing screen resolution, press the

AUTO function button to improve resolution.

4. Press the power button on the front panel to turn the power on. When monitor power is

turned on, the 'Self Image Setting Function' is executed automatically.

(Only Analog Mode) Power Button 3. Put the power cord and cables into the cable holder.(Only E2411PU)

Connecting the Display

Connecting the USB(Universal Serial Bus) Cable

1. You can use the USB port at the back of the monitor to connect peripherals (USB

mouse, USB keyboard, etc.) to the monitor, not to the computer.

The monitor’s USB terminal supports USB 2.0 and High Speed cables.

Two USB Downstream ports

Connect these ports to a mouse,

USB keyboard,memory stick with

current spec under 100mA.

One USB Upstream port

Connect this port to the downstream

port of a computer, laptop or USB

monitor (Your computer or USB

monitor must support USB and have

NOTE This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.15

Control Panel Functions

Front Panel Controls

OSD LOCKED/UNLOCKED This function allows you to lock the current control

settings, so that they cannot be inadvertently changed.

Press and hold the MENU button for several seconds.

The message "OSD LOCKED" should appear.

You can unlock the OSD controls at any time by pushing

the MENU button for several seconds. The message

"OSD UNLOCKED" should appear.

SUPER ENERGY SAVING Button

Use this button to enter

menu.For more information, refer to page 22.16

Control Panel Functions

When two input signals are connected, you can select the

input signal (D-SUB/DVI) you want. When only one signal

is connected, it is automatically detected. The default

Exit the OSD(On Screen Display).

AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press

the AUTO button before entering the On Screen

Display(OSD). (Only Analog Mode)

This will automatically adjust your display image to

the ideal settings for the current screen resolution

size (display mode).

The best display mode is

E2211PU/E2411PU : 1920 x 1080

Use this button to turn the display on or off.

The power indicator stays white if the display is running

properly (On Mode). If the display is in Sleep Mode

(Energy Saving), the power indicator is blinking white.

On Screen Display (OSD) Control Adjustment

Making adjustments to the image size, position and operating

parameters of the display is quick and easy with the On Screen

Display Control system.

A short example is given below to familiarize you with the use of the

controls. The following section is an outline of the available

adjustments and selections you can make using the OSD.

To make adjustments in the On Screen Display, follow these steps:

Press the discretionary Button, then the main menu of the OSD appears.

To access a control, use the corresponding Buttons.

Use the / Buttons to adjust the image to the desired level.

Use the Button to select other sub-menu items.

Press the EXIT Button to exit from the OSD.

On Screen Display(OSD) Selection and Adjustment

The following table indicates all the On Screen Display control, adjustment,

for a user's operating

To adjust the contrast of the

To customize the color of the

MENU To adjust the brightness of the

DSUB DVI-D To adjust the image size

DSUB DVI-D Turn off the SUPER ENERGY SAVING function.

Initialize the SUPER ENERGY SAVING and set to "OFF" mode.

ON OFF RESET NOTE The order of icons may differ depending on the model (18~24).19

On Screen Display(OSD) Selection and Adjustment

You were introduced to the procedure of selecting and adjusting an item

using the OSD system. Listed below are the icons, icon names, and icon

descriptions of the all items shown on the Menu.

NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual.

Adjust (Decrease/Increase)

Press the MENU Button, then the main menu of the OSD appears.

Select another sub-menu

Restart to select sub-menu20

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

To adjust the brightness of the screen.

Change the input image signal ratio to

WIDE ORIGINAL Switch to full screen mode according to

* This function works only if input

resolution is lower than monitor ratio

• WARM: Set the screen to warm color

• MEDIUM: Set the screen to medium

• COOL: Set the screen to cool color

RED Set your own red color levels.

GREEN Set your own green color levels.

BLUE Set your own blue color levels.

USER To adjust the volume of headphone/Speaker.21

On Screen Display(OSD) Selection and Adjustment

Main menu Description

To choose the language in which the

control names are displayed.

Press the , buttons to reset

Restore all factory default settings except

To adjust the contrast of the screen.

: Select another sub-menu22

On Screen Display(OSD) Selection and Adjustment

You were introduced to the procedure of selecting and adjusting an item

using the OSD system. Listed below are the icons, icon names, and icon

descriptions of the all items shown on the Menu.

NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual.

On Screen Display(OSD) Selection and Adjustment

: Select another sub-menu

Turn on the SUPER ENERGY SAVING fuction.

When current setting value is

ON,the SUPER SAVING color is

Turn off the SUPER ENERGY SAVING function.Now the monitor

is LED SAVING function.

When current setting value is

OFF,the SUPER SAVING color is

Clear the TOTAL POWER REDUCTION and TOTAL CO2

TOTAL POWER REDUCTION : How much power is saved during using the monitor.

TOTAL CO2 REDUCTION : Change the TOTAL POWER REDUCTION to CO2.

On Screen Display(OSD) Selection and Adjustment

Saving Data depends on the Panel. So,those values should be different from

each panel and panel vendor.

LG accumulate those values using integrated function with 10 minutes

broadcast video signal.

LED Saving means that how much power can be saved using WLED Panel

instead of CCFL panel.

SUPER Saving means that how much power can be more saved using

SUPER ENERGY SAVING function.

Check the following before calling for service.

Do you see a "OSD LOCKED" message on the screen?

● Is the power cord of the

● Is the power indicator

● Is the power indicator

● Do you see an "OUT OF RANGE" message on

● Do you see a "CHECK SIGNAL CABLE"

Check and see if the power cord is connected

properly to the power outlet.

Press the Power button.

If the display is in power saving mode, try moving

the mouse or pressing any key on the keyboard to

bring up the screen.

• Try to turn on the PC

This message appears when the signal from the

PC (video card) is out of horizontal or vertical

frequency range of the display. See the

'Specifications' section of this manual and

configure your display again.

This message appears when the signal cable

between your PC and your display is not

connected. Check the signal cable and try again.

• You can secure the current control settings,

so that they cannot be inadvertently changed.

You can unlock the OSD controls at any time

by pushing the MENU button for several

seconds: the message

“OSD UNLOCKED” will appear.

Do you see “OSD LOCKED” when you

Display image is incorrect

● Display Position is

background, vertical

Press the AUTO button to automatically adjust

your display image to the ideal setting.

If the results are unsatisfactory, adjust the image

position using the H position and V position icon

in the on screen display.

Press the AUTO button to automatically adjust

your display image to the ideal setting.

If the results are unsatisfactory, decrease the

vertical bars or stripes using the CLOCK icon in

the on screen display.

Press the AUTO button to automatically adjust

your display image to the ideal setting.

If the results are unsatisfactory, decrease the

horizontal bars using the PHASE icon in the on

Check Control Panel --> Display --> Settings

and adjust the display to the recommended

resolution or adjust the display image to the ideal

setting. Set the color setting higher than 24 bits

IMPORTANT Check Control Panel --> Display --> Settings and see if the frequency or the

resolution were changed. If yes, readjust the video card to the recommend

If the recommended resolution (optimal resolution) is not selected, letters may be

blurred and the screen may be dimmed, truncated or biased. Make sure to select

the recommend resolution.

The setting method can differ by computer and O/S (Operation System),

and resolution mentioned above may not be supported by the video card

performance. In this case, please ask to the computer or the video card

Display image is incorrect

● The screen color is

● The screen blinks.

Check if the signal cable is properly connected

and use a screwdriver to fasten if necessary.

Make sure the video card is properly inserted in

Set the color setting higher than 24 bits (true color)

at Control Panel - Settings.

Check if the screen is set to interlace mode and if

yes, change it to the recommend resolution.

Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?

Have you installed the

Be sure to install the display driver from the display

driver CD (or diskette) that comes with your

display. Or, you can also download the driver from

our web site: http://www.lg.com.

Make sure to check if the video card supports

inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating

0.248 x 0.248 mm (Pixel pitch)

Horizontal Freq. 30 kHz to 83 kHz (Automatic)

Vertical Freq. 56 Hz to 75 Hz (Automatic)

Input Form Separate Sync.

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W Power

Operating Conditions

Attached ( ), Detached ( O )

NOTE Information in this document is subject to change without notice.

inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating

0.276 x 0.276 mm (Pixel pitch)

Horizontal Freq. 30 kHz to 83 kHz (Automatic)

Vertical Freq. 56 Hz to 75 Hz (Automatic)

Input Form Separate Sync.

Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W Power

Operating Conditions

Attached ( ), Detached ( O )

NOTE Information in this document is subject to change without notice.

Preset Modes (Resolution)

Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)

Installing the Wall mount plate

This monitor satisfies the specifications of the Wall mount plate or

the interchange device.

After moving the product to face

downward, make sure to place it on a

soft cloth or a cushion to avoid surface

Separate the head and the stand with

the use of a screwdriver.32

Wall mount plate(Separate purchase)

This is stand-type or wall mount type and is

connectable with Wall mount plate.

Please refer to the installation guide for more

details, which is provided when Wall mount plate

Kensington Security Slot

Connected to a locking

purchased separately at

NOTE VESA compatible only with respect to screw mounting interface dimensions and mounting screw

Please use VESA standard as below.

* 784.8 mm and under (30.9 inch)

- Wall Mount Pad Thickness : 2.6 mm

- Screw : 4.0 mm x Pitch 0.7 mm x Length 10 mm

* 787.4 mm and above (31.0 inch)

- Please use VESA standard wall mount pad and screws.

Installing the Wall mount plateMake sure to read the Safety Precautions

before using the product.

Keep the OWNER’S MANUAL(CD) in an

accessible place for furture reference.

The model and serial number of the SET is

located on the back or one side of the SET.

Record it below should you ever need service.

MODEL SERIAL As an ENERGY STAR Partner LGE U. S. A.,Inc.

has determined that this product meets the

ENERGY STAR guidelines for energy efficiency.

ENERGY STAR is a set of power-saving

guidelines issued by the U.S.Environmental

Protection Agency(EPA).