GAMA78GPMUD2H - Carte mère GIGABYTE - Free user manual and instructions

Find the device manual for free GAMA78GPMUD2H GIGABYTE in PDF.

View the manual :

Manual assistant

Waiting for your message

Product information

Brand : GIGABYTE

Model : GAMA78GPMUD2H

Category : Carte mère

Download the PDF manual Print

Download the instructions for your Carte mère in PDF format for free! Find your manual GAMA78GPMUD2H - GIGABYTE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GAMA78GPMUD2H by GIGABYTE.

USER MANUAL GAMA78GPMUD2H GIGABYTE

2-5 Advanced BIOS Features (

2-6 Integrated Peripherals (

2-7 Power Management Setup ( ) 50

2-8 PnP/PCI Configurations (

2-9 PC Health Status (

2-12 Set Supervisor/User Password (

2-13 Save & Exit Setup (

2-14 Exit Without Saving (

4-4 (Easy Energy Saver) 71

DIMM Dual Channel Memory

Surround Speaker Out

 (Easy Energy Saver)

CPU CPU CPU CPU CPU CPU CPU CPU CPU CPU CPU- 15 -

CPU CPU CPU (CPU_FAN)

(Dual Channel Technology) BIOS

2x4-pin 2x12-pin 12V

16 PS_ON(soft On/Off)

CPU_FAN SYS_FAN 4-pin

(Master/Slave) ( IDE )

HD (High Definition ) AC'97

"SATA is found running at IDE MODE!"

BIOS POST SATA IDE (SATA is found running at IDE MODE...)

IDE AHCI SATA AHCI <Y> (Yes, set SATA to AHCI

mode for me) IDE <N> (No, do not show this message again)

 Integrated Peripherals

 Integrated Peripherals ( )

 Exit Without Saving ( )

CPU NorthBridge Freq.

CPU Host Clock Control [Auto]

x CPU Frequency (MHz) 200

PCIE Clock (MHz) [Auto]

System Voltage Optimized

HT Link Frequency (HT Link )

Auto BIOS CPU HT Link ( )

200 MHz~2.6 GHz HT Link 200 MHz~2.6 GHz

CPU Clock Ratio (CPU )

CPU CPU CPU NorthBridge Freq. ( CPU )

CPU CPU CPU Host Clock Control (CPU )

CPU Frequency (MHz) (CPU )

x TwTr Command Delay Auto 3T 3T

x RAS to RAS Delay Auto 3T 3T DDRII Timing Items

1T/2T Command Timing

1T ( ) 2T TwTr Command Delay

Auto ( ) 1T~3T Trfc0 for DIMM1

Auto ( ) 11T~26T RAS to RAS Delay

System Voltage Optimized

CPU CPU Voltage Control (CPU )

CPU Normal CPU Vcore (CPU )

IDE Channel 2/3 Master/Slave ( / IDE/SATA

Time (hh:mm:ss) 18:25:04

 IDE Channel 0 Master [None]

 IDE Channel 0 Slave [None]

 IDE Channel 1 Master [None]

 IDE Channel 1 Slave [None]

 IDE Channel 2 Master [None]

 IDE Channel 2 Slave [None]

 IDE Channel 3 Master [None]

 IDE Channel 3 Slave [None]

Drive A [1.44M, 3.5"]

Floppy 3 Mode Support [Disabled]

Halt On [All, But Keyboard]

All, But Keyboard ( )

UMA Frame Buffer Size ( )

UMA Frame Buffer Size

MS-DOS Auto ( ) 128MB

x Surround View Disabled

Onboard VGA output connect [D-SUB/DVI]

AMD C1E Support [Software SMI]

Virtualization [Disabled]

First Boot Device [Floppy]

Second Boot Device [Hard Disk]

Third Boot Device [CDROM]

First / Second / Third Boot Device ( / / )

2-6 Integrated Peripherals ( )

Integrated Peripherals

 SMART LAN [Press Enter]

Onboard Serial Port 1 [3F8/IRQ4]

Onboard Parallel Port [378/IRQ7]

Parallel Port Mode [SPP]

SATA Native IDE SATA Native IDE Native IDE Enabled (

RAID SATA RAID AHCI SATA AHCI AHCI (Advanced Host Controller

As SATA Type OnChip SATA Type

Start detecting at Port

Part1-2 Status = Open / Length = 0m

Part3-6 Status = Open / Length = 0m

Part4-5 Status = Open / Length = 0m

Part7-8 Status = Open / Length = 0m

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

Start detecting at Port

Cable Length 10m Cable

length less than 10M MS-DOS 10/100 Mbps

Windows LAN Boot ROM Gigabit hub 10/100/

hub Status Short Length

Part1-2 Status = Short / Length = 2m

USB Keyboard Support ( USB )

USB Mouse Support ( USB )

EPP EPP (Enhanced Parallel Port)

ECP ECP (Extended Capabilities Port)

ECP+EPP EPP ECP ECP Mode Use DMA (ECP DMA )

Soft-Off by Power button ( )

MS-DOS Instant-Off ( )

USB Wake Up from S3 ( USB )

Power Management Setup

ACPI Suspend Type [S3(STR)]

Soft-Off by Power button [Instant-off]

USB Wake Up from S3 [Enabled]

Modem Ring Resume [Disabled]

PME Event Wake Up [Enabled]

HPET Support ( ) [Enabled]

High Precision Event Timer

Power On By Mouse ( )

+5VSB 1 ATX Disabled ( )

Power On By Keyboard ( )

Power On by Keyboard Passoword

Power-On by Alarm ( )

2-9 PC Health Status ( )

Current Voltage(V) Vcore / DDR2 1.8V / +3.3V / +12V ( )

Current System/CPU Temperature ( /CPU )

/CPU Current CPU/SYSTEM/NB FAN Speed (RPM) ( )

CPU Warning Temperature (CPU )

CPU CPU Disabled ( CPU

F CPU/SYSTEM/NB FAN Fail Warning (CPU/ / )

C Current CPU Temperature 47

C Current CPU FAN Speed 3375 RPM Current SYSTEM FAN Speed 0 RPM Current NB FAN Speed 0 RPM CPU Warning Temperature [Disabled]

Menu LevelGA-MA78GPM-UD2H - 54 -

CPU Smart FAN Control (CPU )

CPU Disabled CPU Enabled CPU CPU EasyTune ( )

CPU Smart FAN Mode (CPU )

CPU Smart FAN Control

Voltage 3-pin CPU Voltage

 Integrated Peripherals

2-12 Set Supervisor/User Password ( / )

 Integrated Peripherals

Change/Set/Disable Password

2-14 Exit Without Saving ( )

 Integrated Peripherals

 Standard CMOS Features

 Integrated Peripherals

C. Xpress Recovery2 (Backup)

BACKUP Xpress Recovery2- 65 -

D. Xpress Recovery2 (Restore)

RESTORE E. Xpress Recovery2 (Remove)

REMOVE F. Xpress Recovery2

BIOS BIOS "Are you sure

Update BIOS from Drive

Enter : Run :Move ESC:Reset F10:Power Off

!! Copy BIOS completed - Pass !!

 Integrated Peripherals

2. BIOS Update BIOS from File

EasyTune 6 CPU CPU EasyTune 6

Graphics ATI NVIDIA Smart C.I.A.2 CPU Smart Fan Advance Mode CPU CPU HW Monitor

4-4 (Easy Energy Saver)

Enable Incoming Folder ...

Integrated Peripherals OnChip SATA Controller

Integrated Peripherals

OnChip SATA Controller [Enabled]

OnChip SATA Port4/5 Type [As SATA Type]

Onboard 1394 Function [Enabled]

 SMART LAN [Press Enter]

Onboard Serial Port 1 [3F8/IRQ4]

Onboard Parallel Port [378/IRQ7]

Parallel Port Mode [SPP]

<1> View Drive Assignments

<3> Delete LD SATA <4> Controller Configuration

RAID Option ROM Version 3.0.1540.33

No Array is defined..

Press <Ctrl-F> to enter FastBuild (tm) Utility...

View Drive Assignments[ 1 ]

Controller Configuration [ 4 ]

Press 1..4 to Select Option [ESC] Exit

[ Keys Available ]GA-MA78GPM-UD2H - 78 -

[ ] Up [] Down [ESC] Exit [Enter] Select

[ ] Up [] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change

[ Drives Assignments ]

1:Mas WDC WD800JD-22LSA0 SATA 3G 79.89 N

View Drives Assignments AMD SB700

3. Drives Assignments

Fast Initialization option has been selected

It will erase the MBR data of the disk.

Press Ctrl-Y to Modify Array Capacity or press any

other key to use maximum capacity...

[ ] Up [] Down [ESC] Exit [Ctrl+H] Secure Erase [PgUp/Dn] Page Change

[ View Drives Assignments ]

1. <3> Delete LD Menu

2. 9 View LD Definition Menu

3. Delete LD Menu RAID BIOS

[ View LD Definition Menu ]

LD No RAID Mode Total Drv Capacity (GB) Status

LD 1 RAID 0 2 157.99 Functional

[ Drives Assignments ]

1:Mas WDC WD800JD-22LSA0 SATA 3G 79.89

Press Ctrl-Y to delete the data in the disk!

to install a 3rd party SCSI or RAID driver <F6> ( 1)

Press F6 if you need to install a third party SCSI or RAID driver.

ENTER=Select F3=Exit

You have chosen to configure a SCSI Adapter for use with Windows,

using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC

to return to the previous screen.- 83 -

(High Definition Audio)

SPDIF_IO S/PDIF S/PDIF S/PDIF S/PDIF S/PDIF S/PDIF A. (S/PDIF + )

(S/PDIF + ) ( ) S/PDIF S/PDIF

( ) S/PDIF S/PDIF S/PDIFS/PDIF S/PDIF- 89 -

A CPU CPU CPU_FAN ATX 12V CPU POST <Delete> BIOS Load

Restriction of the use of Certain Hazardous Substances in Electrical and

Electronic Equipment, RoHS) WEEE ( Waste Electrical and Electronic

 G.B.T. INC. (U.S.A.) -