MX535 - Inkjet multifunction printer CANON - Free user manual and instructions

Printing Technology	Thermal Inkjet Color
Max Print Resolution	4,800 x 1,200 dpi
Black & White Print Speed	9.7 ppm
Color Print Speed	5.5 ppm
Automatic Duplex Printing	Yes
Borderless Printing	Yes
Max Paper Size	A4
Max Monthly Duty Cycle	3,000 pages
Optical Scanner Resolution	1,200 x 2,400 dpi
Scanner Sensor Type	CIS
Scanner Color Depth	24 bits
Automatic Document Feeder (ADF)	30 sheets
Multiple Copies	Up to 99 copies
Copy Zoom	25% to 400%
Fax Transmission Speed	33.6 kbit/s
Fax Memory	50 pages
Connectivity	Wi-Fi 802.11n, Ethernet (RJ-45), USB 2.0
Memory Card Reader	Yes
Power Consumption (Operational)	18 W
Power Consumption (Standby)	1.1 W
Dimensions (W x D x H)	458 x 385 x 200 mm
Weight	8.5 kg

Frequently Asked Questions - MX535 CANON

How to connect the Canon PIXMA MX535 to a Wi-Fi network?

Press the Wi-Fi button on the printer until the light flashes, then hold the WPS button on your box/router for 2 seconds. The connection is automatically established. You can also configure Wi-Fi from the Network Settings menu on the device's LCD screen.

Which ink cartridges are compatible with the Canon PIXMA MX535?

The MX535 uses two cartridges: the PG-545 (or PG-545XL) for black and the CL-546 (or CL-546XL) for color. The XL versions offer higher yield and a lower cost per page.

How to resolve a paper jam on the Canon MX535?

Open the top cover and gently remove the jammed paper without tearing it. Also check the output area and the cassette tray. Make sure the side guides on the tray are properly adjusted to the paper size to avoid repeated jams.

How to scan a document with the MX535?

Place your document face down on the scanner glass or load up to 30 sheets in the automatic feeder (ADF). From your PC, launch Canon IJ Scan Utility, choose the document type, and click Scan. The optical resolution reaches 1200 x 2400 dpi.

How to send a fax with the Canon PIXMA MX535?

Connect the telephone cable to the LINE port of the printer. Place your document in the ADF or on the glass, dial the recipient's number on the numeric keypad, then press Color or Black to send. The transmission speed is 33.6 kbit/s.

How to print from a smartphone or tablet?

Install the Canon PRINT Inkjet/SELPHY app (available on iOS and Android) and connect your mobile to the same Wi-Fi network as the printer. You can also print from cloud services (Google Drive, Dropbox) using PIXMA Cloud Link.

Does the Canon MX535 support automatic duplex printing?

Yes, the MX535 has an automatic duplex module. In your PC's print settings, simply check Duplex Printing; the printer automatically flips the sheets without manual intervention.

How to clean the print heads if the quality is poor?

In the Canon IJ Printer Assistant Tool (Windows) or print preferences (Mac), select Cleaning then Deep Cleaning if the issue persists. Then print a nozzle check pattern to confirm the heads are clean.

Can the Canon MX535 be connected directly via a network cable?

Yes, the MX535 has an Ethernet (RJ-45) port allowing a wired connection to the local network. Simply connect a standard network cable and the printer will be detectable by all PCs on the network without Wi-Fi configuration.

How to perform borderless printing with the MX535?

In the print driver, select a compatible format (e.g., 10 x 15 cm or A4) and check the Borderless option. Use suitable photo paper for optimal results. This function is available for several photo paper formats.

What to do if the printer is not recognized by the computer?

Ensure the USB cable is properly connected or that the printer is on the same Wi-Fi network as the PC. Reinstall the driver from the official site canon-europe.com. Restarting the printer and PC often resolves the issue.

What is the fax memory capacity and how many pages can it store?

The fax memory of the MX535 can store up to 50 pages. In case of a power outage or end of paper, received faxes are saved in memory and print as soon as the situation is resolved.

USER MANUAL MX535 CANON

Copyright CANON INC. tous rights reserved.

Important

MG7100 series, MG6400 series, MG5500 series, MX530 series

(4) Zone Notifications

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
2. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
3. Do not use this product to report a gas leak in the vicinity of the leak.

"CAUTION - To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord."

IMPORTANT MESURES DE SECURITÉ

CONSERVER CES INSTRUCTIONS

FCC Notice (U.S.A. Only)

For 120V, 60Hz model

Model Number: K10400 (Contains FCC ID: AZDK30357)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.

FCC ID:AZDK30357

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The equipment complies with FCC radiation exposure limits for at uncontrolled equipment. This equipment should be installed and operated with minimum distance at least 20cm between the radiator and persons body (excluding extremities: hands, wrists, feet and ankles) and must not be colocated or operated with any other antenna or transmitter.

Canon U.S.A., Inc.

One Canon Park

Melville, New York 11747

1-800-652-2666

Pre-Installation Requirements

Order Information

When ordering service from the telephone company for this equipment, the following may be required.

Universal Service Order Code (USOC): RJ11C

The Facility Interface Code (FIC): 02LS2

Service Order Code (SOC): 9.0F

Connection of the Equipment

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.

On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.

The REN is used to determine the number of devices that may be connected to a telephone line.

Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. The REN for this product is part of the product identifier that has the format

US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.

Connection to party lines is subjected to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

In Case of Equipment Malfunction

Should any malfunction occur which cannot be corrected by the procedures described in the Online Manual, disconnect the equipment from the telephone line cable, turn off the power and disconnect the power cord. The telephone line cable should not be reconnected or the main power switch turned ON until the problem is completely resolved. Users should contact their local authorized Canon Facsimile Service Dealer for the servicing of equipment.

Information regarding Authorized Service Facility locations can be obtained by calling the Canon Customer Center.

Rights of the Telephone Company

If this equipment causes harm to the telephone network, the telephone company may temporarily disconnect service. The telephone company also retains the right to make changes in facilities and services that may affect the operation of this equipment. When such changes are necessary, the telephone company is required to give adequate prior notice to the user. However, if advance notice is not possible, the telephone company will notify the customer as soon as possible. Also, the customer will be advised of his/her right to file a compliant with the FCC if he/she believes it is necessary.

Warning

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone FAX machine unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual.

In order to program this information into your FAX machine, you should complete the procedure to register your name, unit's telephone number, time, and date. Refer to the Online Manual.

Users in Canada

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and

operated keeping the radiator at least 20cm or more away from person's body (excluding extremities: hands, wrists, feet and ankles).

Pre-Installation Requirements

Notice

This equipment meets the applicable Industry Canada technical specifications.

The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.

Environmental Information

Reducing your environmental impact while saving money

Power Consumption and Activation Time

The amount of electricity a device consumes depends on the way the device is used. This product is designed and set in a way to allow you to reduce your electricity costs. After the last print it switches to Ready Mode. In this mode it can print again immediately if required. If the product is not used for a time, the device switches to its Power Save Mode. The devices consume less power (Watt) in these modes. If you wish to set a longer Activation Time or would like to completely deactivate the Power Save Mode, please consider that this device may then only switch to a lower energy level after a longer period of time or not at all.

Canon does not recommend extending the Activation Times from the optimum ones set as default.

Energy Star®

The Energy Star® programme is a voluntary scheme to promote the development and purchase of energy efficient models, which help to minimise environmental impact.

Products which meet the stringent requirements of the Energy Star® programme for both environmental benefits and the amount of energy consumption will carry the Energy Star® logo accordingly.

Paper types

This product can be used to print on both recycled and virgin paper (certified to an environmental stewardship scheme), which complies with EN12281 or a similar quality standard. In addition it can support printing on media down to a weight of 64g / m^2 , lighter paper means less resources used and a lower environmental footprint for your printing needs.

(14) Bouton Configuration (Setup)

- Pare-feu (Firewall)

- Adresse IP (IP Address)

- WCN (Windows Connect Now)

WPS (Wi-Fi Protected Setup)

Impression Mosaique/Poster

Correspondance pilot

Correspondance pilot

Inverser proportions

• Jrnal appeals (SORT.)

• Jrnal appeals (SORT.)