8 Pro - Cellphone ONEPLUS - Free user manual and instructions

USER MANUAL 8 Pro ONEPLUS

Restrictions in 5GHz band

India Regulatory Conformance

Consignes de sécurité This device complies with part 15 of the FCC rules. device, pursuant to part 15 of the FCC Rules. These Operation is subject to the following two conditions: limits are designed to provide reasonable protection against harmful to part interference in a residential (1) This device may not cause harmful interference; installation. This equipment generates uses and can and radiate radio frequency energy and, if not installed (2) This device must accept any interference and used in accordance with the instructions, may received, including interference that may cause cause undesired operation. communications. NOTE: The manufacturer is not responsible for However, there is no guarantee that interference any

will not occur in a particular installation. If this unauthorized modifications or changes to this equipment does cause harmful interference to radio equipment. Such modifications or changes could or television reception, which can be determined by void the user's authority to operate the equipment. turning the equipment off and on, the user is NOTE: This equipment has been tested and found encouraged to try to correct the interference by one to comply with the limits for a Class B digital or more of the following measures: radio

• The antenna(s) used for this transmitter must not be collocated or operate in conjunction with any - Increase the separation between the equipment other antenna or transmitter. and receiver.

• The country code selection is for non-US model - Connect the equipment into an outlet on a circuit only and is not available for all US models. Per different from that to which the receiver is FCC regulation, all Wi-Fi products marketed in US connected. must be fixed to US operation channels only. - Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information (SAR) FCC Caution

• This device is designed and manufactured not to exceed the emission limits for exposure to radio

• Any changes or modifications not expressly frequency (RF) energy set by the Federal approved by the party responsible for compliance Communications could void the user’s authority to operate the Government. equipment.

• The SAR limit set by the FCC is 1.6W/kg. The to use only the power required to reach the network. highest SAR value of this device type complies In general, the closer you are to a wireless base with this limit. And please see the “Quick Start station antenna, the lower the power output. Guide” to find the highest SAR value reported to

• While there may be differences between the SAR FCC. levels of various devices and at various positions,

• Tests for SAR are conducted using standard they all meet the government requirement. operating positions accepted by the FCC with the

• This device has also been tested and meets the device transmitting at its highest certified power FCC RF exposure guidelines for use with an level in all tested frequency bands. accessory that contains no metal and positions the

• Although the SAR is determined at the highest handset a minimum of 15mm from the body. Use of certified power level, the actual SAR level of the other accessories may not ensure compliance with device while operating can be well below the FCC RF exposure guidelines. Position the handset maximum value. This is because the device is a minimum of 15mm from your body when the designed to operate at multiple power levels so as device is switched on.

Consignes de sécurité

• Choose the belt clips, holsters, or other similar

• The FCC has adopted HAC rules for digital body-worn accessories which do not contain wireless phones. These rules require certain phone metallic components to support the minimum to be tested and rated under the American National distance of body-worn operation. Cases with metal Standard Institute (ANSI) C63.19-2011 hearing aid parts may change the RF performance of the device, compatibility standards. including its compliance with RF exposure

• The ANSI standard for hearing aid compatibility guidelines, in a manner that has not been tested or contains two types of ratings. certified, and use such accessories should be

• M-Ratings: Rating for less radio frequency avoided. interference to enable acoustic coupling with Hearing Aid Compatibility (HAC) hearing aids. regulations for Mobile phones

• T-Ratings: Rating for inductive coupling with hearing aids in tele-coil mode.

• Your phone is compliant with the FCC Hearing

• Not all phones have been rated, a phone is Aid Compatibility requirements. considered hearing aid compatible under FCC rules

Consignes de sécurité if it is rated M3 or M4 for acoustic coupling and T3

• This phone has been tested and rated for use with or T4 for inductive coupling. These ratings are hearing aids for some of the wireless technologies given on a scale from one to four, where four is the that it uses. However, there may be some newer most compatible. Your phone meets the M3/T3 wireless technologies used in this phone that have level rating. not been tested yet for use with hearing aids. It is important to try the different features of this phone

• However, hearing aid compatibility ratings don't thoroughly and in different locations, using your guarantee that interference to your hearing aids hearing aid or cochlear implant, to determine if you won't happen. Results will vary, depending on the hear any interfering noise. Consult your service level of immunity of your hearing device and the provider or the manufacturer of this phone for degree of your hearing loss. If your hearing device information on hearing aid compatibility. If you happens to be vulnerable to interference, you may have questions about return or exchange policies, not be able to use a rated phone successfully. Trying consult your service provider or phone retailer. out the phone with your hearing device is the best way to evaluate it for your personal needs.

• Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional

1. Lead (Pb) – not over 0.1% by weight;

rayonnements IC établies pour un environnement

2. Cadmium (Cd) – not over 0.01% by weight;

non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 15mm de distance entre

3. Mercury (Hg) – not over 0.1% by weight;

la source de rayonne

4. Hexavalent chromium (Cr6+) – not over 0.1% by

weight; India Regulatory Conformance

5. Polybrominated biphenyls (PBBs) – not over 0.1%

E-waste Information by weight;

6. Polybrominated diphenyl ethers (PBDEs) – not

The products manufactured by OnePlus comply over 0.1% by weight. with the E-waste Rules 2016 and its amendments. Considering the exemption listed in SCHEDULE II of the E-waste Rules, the content of hazardous substances is as follows:

Consignes de sécurité Email：info@attero.in For the purpose of recycling and reducing the effect of the environment, the Electrical & Electronic Phone：1800-103-6328 Equipment should not be disposed of with other household waste, please separate these items from other types of waste and recycle them to the Exigo: authorized e-waste company. As a part of E-waste Website: www.exigorecycling.com recycling initiative, OnePlus has partnered with two authorized E-waste companys named AS Attero Email: info@exigorecycling.com and Exigo. You can contact AS Attero or Exigo to Toll Free: 1800-102-5018 recycle your E-waste product. For further Languages & Input information about the OnePlus E-waste partner, you can contact at You can choose your language according to the following steps: Attero: Settings > System > Languages & input > Languages > Choose your preference language. Website：www.attero.in

Consignes de sécurité Mobile phone supports all the below mentioned Indian Official Languages for readability test as per IS 16333(Part-3):2017 ASSAMESE, BANGLA, BODO,

OnePlus Customer Support

OnePlus Customer Support