Nord N100 - Smartphone ONEPLUS - Free user manual and instructions

USER MANUAL Nord N100 ONEPLUS

EU Regulatory Conformance Hearing Aid Compatibility (HAC) regulations for Mobile

Restrictions in 5GHz band

Frequency Bands and Power

Correct Disposal of this Product

Restrictions in 5GHz band

• This device was tested for typical operation https://www.oneplus.com/support/manuals. with the back of the handset kept 5mm from the body. To maintain compliance with RF Notice: Observe the national local regulations exposure requirements, use accessories that in the location where the device is to be used. maintain a 5mm separation distance between This device may be restricted for use in some your body and the back of the handset. The or all member states of the European Union use of belt clips, holsters and similar (EU). accessories should not contain metallic RF Exposure Information (SAR) components in its assembly. The use of accessories that do not satisfy these

• The SAR limit of Europe is 2.0W/kg. The requirements may not comply with RF highest SAR value of this device complies exposure requirements, and should be with this limit. And please see the “Highest avoided. SAR Value”card to find the highest SAR

• Cases with metal parts may change the RF value. performance of the device, including its compliance with RF exposure guidelines, in a

Some bands may not be available in all Correct Disposal of this Product countries or all areas. Please contact the local carrier for more details. The crossed-out wheeled-bin symbol on your product， battery， (b) Maximum radio-frequency power literature or packaging indicates transmitted in the frequency bands in which that the product and its electronic the radio equipment operates: The maximum accessories power for all bands is less than the highest should not

disposed of with other household waste. To limit value specified in the related Harmonized safely recycle your device, please use return Standard. please see the “Quick Start Guide” and collection system or contact the retailer to find the frequency bands and transmitting where the device was originally purchased. power. RoHS Compliance This product complies with directive 2011/65/EU and its amendments, on the restriction of the use of certain hazardous

electrical and electronic the Energy-related Products Directive (ErP) equipment. 2009/125/EC. For more information, please visit: ERP compliance https://www.oneplus.com/support/manuals “ “OnePlus Technology (Shenzhen) Co., Ltd. Hereby declares that its products conform to Brand ONEPLUS Manufacturer’s name Shenzhen Kunxing Technology Co.,Ltd. Huizhou Golden Lake Industrial Co., Ltd Manufacturer’s address Room 301,302,303,3/F&103,1/F.Building 38, Xinhe Road, ShangMuGu, PingHu, LongGang District, Shenzhen, Guangdong, P.R.China Dongjiang Industrial Estate, Shuikou Street, Huicheng District, Huizhou City, Guangdong Province, 516005, P. R. China Model identifier WC018A41KX，WC018A31KX WC018A41JH，WC018A31JH Input voltage 100-240V Input AC frequency 50/60Hz Output current 2.0A Output voltage 5.0VDC 9.0VDC 5.0VDC 9.0VDC Output power 10.0W 18.0W 10.0W 18.0W

Average active efficiency 80.98% 85.50% 80.98% 85.50% Efficiency at low load (10 %) 78.09% 80.89% 78.09% 80.89% No-load power consumption 0.026W 0.028W 0.026W 0.028W FCC Regulatory Conformance (2) This device must accept any interference FCC Statement cause undesired operation. received, including interference that may NOTE: The manufacturer is not responsible for This device complies with part 15 of the FCC any radio or TV interference caused by rules. Operation is subject to the following two unauthorized modifications or changes to this conditions: equipment. Such modifications or changes (1) This device may not cause harmful could void the user's authority to operate the interference; and equipment.

NOTE: This equipment has been tested and the equipment off and on, the user is found to comply with the limits for a Class B encouraged to try to correct the interference by digital device, pursuant to part 15 of the FCC one or more of the following measures: Rules. These limits are designed to provide - Reorient or relocate the receiving antenna. reasonable protection against harmful to part interference in a residential installation. This - Increase the separation between the equipment generates uses and can radiate equipment and receiver. radio frequency energy and, if not installed and - Connect the equipment into an outlet on a used in accordance with the instructions, may circuit different from that to which the receiver cause is connected. harmful interference

radio communications. However, there - Consult the dealer or an experienced

guarantee that radio/TV technician for help. interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

• This device is designed and manufactured approved by the party responsible for not to exceed the emission limits for exposure compliance could void the user’s authority to to radio frequency (RF) energy set by the operate the equipment. Federal Communications Commission of the U.S. Government.

• The antenna(s) used for this transmitter must not be collocated or operate in

• The SAR limit set by the FCC is 1.6W/kg. conjunction with any other antenna or The highest SAR value of this device type transmitter. complies with this limit. And please see the “Highest SAR Value”card to find the highest

• The country code selection is for non-US SAR value reported to FCC. model only and is not available for all US models. Per FCC regulation, all Wi-Fi

• Tests for SAR are conducted using standard products marketed in US must be fixed to US operating positions accepted by the FCC with operation channels only.

the device transmitting at its highest certified

• This device has also been tested and meets power level in all tested frequency bands. the FCC RF exposure guidelines for use with an accessory that contains no metal and

• Although the SAR is determined at the positions the handset a minimum of 15mm highest certified power level, the actual SAR from the body. Use of other accessories may level of the device while operating can be well not ensure compliance with FCC RF below the maximum value. This is because exposure guidelines. Position the handset a the device is designed to operate at multiple minimum of 15mm from your body when the power levels so as to use only the power device is switched on. required to reach the network. In general, the closer you are to a wireless base station

• Choose the belt clips, holsters, or other antenna, the lower the power output. similar body-worn accessories which do not contain metallic components to support the

• While there may be differences between the minimum distance of body-worn operation. SAR levels of various devices and at various Cases with metal parts may change the RF positions, they all meet the government performance of the device, including its requirement. compliance with RF exposure guidelines, in a

manner that has not been tested or certified,

• The ANSI standard for hearing aid and use such accessories should be avoided. compatibility contains two types of ratings. Hearing Aid Compatibility (HAC)

• M-Ratings: Rating for less radio frequency regulations for Mobile phones hearing aids.

• Your phone is compliant with the FCC

• T-Ratings: Rating for inductive coupling with Hearing Aid Compatibility requirements. hearing aids in tele-coil mode.

• The FCC has adopted HAC rules for digital

• Not all phones have been rated, a phone is wireless phones. These rules require certain considered hearing aid compatible under FCC phone to be tested and rated under the rules if it is rated M3 or M4 for acoustic American National Standard Institute (ANSI) coupling and T3 or T4 for inductive coupling. C63.19-2011 hearing aid compatibility These ratings are given on a scale from one standards. to four, where four is the most compatible. interference to enable acoustic coupling with Your phone meets the M3/T3 level rating.

• However, hearing aid compatibility ratings use with hearing aids. It is important to try the don't guarantee that interference to your different features of this phone thoroughly and hearing aids won't happen. Results will vary, in different locations, using your hearing aid depending on the level of immunity of your or cochlear implant, to determine if you hear hearing device and the degree of your any interfering noise. Consult your service hearing loss. If your hearing device happens provider or the manufacturer of this phone for to be vulnerable to interference, you may not information on hearing aid compatibility. If you be able to use a rated phone successfully. have questions about return or exchange Trying out the phone with your hearing device policies, consult your service provider or is the best way to evaluate it for your personal phone retailer. needs.

• Hearing devices may also be rated. Your

• This phone has been tested and rated for hearing device manufacturer or hearing use with hearing aids for some of the wireless health professional may help you find this technologies that it uses. However, there may rating. For more information about FCC be some newer wireless technologies used in this phone that have not been tested yet for

Hearing Aid Compatibility, please go risk of fire, explosion, leakage or other to http://www.fcc.gov/cgb/dro. hazard. IEEE1725 Compliance

• Only authorized service providers shall replace battery. (If the battery is non-user

• Only use the battery with a charging system replaceable). that has been qualified with the system per CTIA Certification Requirements for Battery Industry Canada Conformance System Compliance to IEEE 1725. Use of an unqualified battery or charger may present a IC Statement risk of fire, explosion, leakage, or other hazard. This device complies with Industry Canada's license exempt RSSs. Operation is subject to

• Replace the battery only with another the following two conditions: battery that has been qualified with the system per this standard, IEEE-Std-1725. (1) This device may not cause interference; Use of an unqualified battery may present a and

(2) This device must accept any interference, This device complies with the Canadian ICES- including 003 Class B specifications. CAN ICES-3(B)/ interference that may cause undesired operation of the device. NMB-3(B). Le présent appareil est conforme aux CNR Cet appareil numérique de la Canadian ICES- d'Industrie Canada applicables aux appareils

RSS-102 systèmes de satellites mobiles utilisant les Restrictions in 5GHz band mêmes canaux. The device could automatically discontinue RF Exposure Information (SAR) transmission in case of absence of information to transmit, or operational failure. Note that this The SAR limit set by the ISED is 1.6W/kg. The is not intended to prohibit transmission of highest SAR value of this device type complies control or signaling information or the use of with this limit. And please see the “Highest repetitive codes where required by the SAR Value” card to find the highest SAR value technology. The device for operation in the reported to the IC. band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to This device has also been tested and meets co-channel mobile satellite systems; the ISED RF exposure guidelines for use with an accessory that contains no metal and -Les dispositifs fonctionnant dans la bande positions the handset a minimum of 15mm 5150-5250 MHz sont réservés uniquement from the body. pour une utilisation a l'intérieur afin de réduire les risques de brouillage préjudiciable aux

Para informações, suporte e assistência, acesse: OnePlus Customer Support www.oneplus.com/pt/support Support information and assistance go to: Descarregar manual: www.oneplus.in/support https://www.oneplus.com/pt/support/manuals Download manuals: https://www.oneplus.in/support/manuals