LE28M660C - LE32C800C - HAIER - Free user manual and instructions

Find the device manual for free LE28M660C - LE32C800C HAIER in PDF.

View the manual :

Manual assistant

Waiting for your message

Product information

Brand : HAIER

Model : LE28M660C - LE32C800C

Download the PDF manual Print

Download the instructions for your in PDF format for free! Find your manual LE28M660C - LE32C800C - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LE28M660C - LE32C800C by HAIER.

USER MANUAL LE28M660C - LE32C800C HAIER

LE22M600CF LE24M600CF LE28M600C LE32M600C Please read this manual carefully before operating the unit,and keep it for future reference.

Audio MENU Important Information

Warning and cautions

EPG Menu(Electronic Program Guide)

PVR File System(only for DTV)

Prepare to record the program

Base Stand Assembly Instruction

Wall Mounting Installation Guidelines

Connecting to your Haier TV

Auto Tuning (DVB-T )

Software Updated(USB)

DTV Manual Tuning (DVB-T )

DTV Manual Tuning (DVB-C) ATV Manual Tuning Program edit

Thanks for buying this 22"/24"/28"/32" LED LCD TV.This guide will help you set up and begin using your TV.

22" FULL HD 1080P Digital LED LCD TV Remote control

AAA battery x2 Instruction Manual Quick start guide Warranty Card Screws Stand

24" FULL HD 1080P Digital LED LCD TV Remote control

AAA battery x2 Instruction Manual Quick start guide Warranty Card Screws Stand

28" HD Ready Digital LED LCD TV Remote control

AAA battery x2 Instruction Manual Quick start guide Warranty Card Screws Stand

32" HD Ready Digital LED LCD TV Remote control

AAA battery x2 Instruction Manual Quick start guide YPbPr Connect Cable Warranty Card Screws Stand

Now you can get started!

IMPORTANT INFORMATION READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.

CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.

FOR ANY PROBLEMS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANYINSIDE PART OF THIS PRODUCT. THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT. CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN. NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT DAMAGE. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.

CAUTION:When the apparatus was in electrostatic circumstance, it maybe malfunction and need to reset by user.

WARNING AND CAUTIONS Warning

High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.

To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.

Do not trap the power supply cord under the television receiver.

Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it should fall.

Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual , and damage to the television, may result if it should fall. Warning Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.

Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.

If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.

CAUTION INSTALLATION Never tamper with any components inside the

TV, or any other adjustment controls not described in this manual. All LED-TV's are high voltage electrical equipment. When you clean dust or any water drops off the SCREEN or CABINET or around any of the buttons or connectors, the power cabled should be removed from the power socket. Wipe the TV with a soft, dry, dust free cloth. During thunderstorms, unplug the power cable and aerial / antenna cable to prevent damage to your TV and any other devices connected to it. All repairs to this TV should only be performed by qualified TV service personnel.

*Locate the TV in the room where light does not strike the screen directly.

*Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. *Allow enough space between the TV and the wall to permit ventilation. *Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure. *Do not cover the ventilation openings when using theTV.

1 Used as Television, display terminal, PC display； 2 High luminance, wide viewing angle；

Panel TV System Video Signal System Storage channel number Input Power Voltage Power consumption Standby Power consumption Audio Output Power (THD 7%) Signal Input

Horizontal definition (TV line)

28" 32" 24" PAL-B/G , I , D/K SECAM-B/G , D/K , L DVB-T, DVB-C PAL/SECAM/MPEG2/MPEG4/H.264 1000(DTV);100(ATV) AC 100 -240 V 50/60Hz 41W 50W 38W 40W <0.30W 2x3W 2x3W 2x8W 2x8W Analog RGB(PC) x1; PC audio x1 High-Definition Multimedia Interface (HDMI) x 2 Composite Input x 1 YPbPr x 1 SCART Input x 1 CI x 1 USB x 1 RF Co-Ax x 1 Headphone x 1 COAXIAL x 1 SCART Output x 1 Composite video input >=350 YPbPr >=400

Base Stand Assembly Instruction

1.Place the TV with the display side down on a flat surface.Use a cloth to protect the display.Position the stand base plate onto the bottom of the stand pole.

2. Attach the stand base plate to the stand pole by firmly tightening the supplied screw.

INSTALLATION NOTES Locate the TV in a room where light does not strike the screen directly. Total darkness or a reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Allow enough space between the TV and the wall to permit ventilation.

Please do not attempt to rotate the TV on the stand.

Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure. EN-7

WALL MOUNTING INSTALLATION GUIDELINES This television can be wall mounted as follows:

1.Place the LED LCD Television onto a solid surface. Please place some soft material over the front of the screen to protect it from any damage.

2.Remove the screws from the lower part of the television, where the base joins to the TV, and take away the stand (put the stand somewhere safe for future use).

3.Use the four screws provided to fix the TV onto a wall mounting bracket (not included) via the four VESA standard holes on the back of the television.

Front control panel(22",24",28")

Remote control sensor.

Indicator LED: RED: STAND BY. Key board.

Display the input source menu.

Display main MENU. In TV mode,press CH+ or CH- to change the channel up and down. In MENU, press CH+ or CH- to select items . Adjust sound level. In MENU,adjust the item that you selected.

Front control panel(32")

Remote control sensor.

Display the input source menu.

Display main MENU. In TV mode,press CH+ or CH- to change the channel up and down. In MENU, press CH+ or CH- to select items . Adjust sound level. In MENU,adjust the item that you selected.

Rear/Side Sockets(22",24",28")

R DIGITAL AUDIO OUTPUT

Rear/Side Sockets (32")

AC-INPUT 100-240V~ 50/60Hz

L R DIGITAL AUDIO OUTPUT

HEADPHONE PC AUDIO VGA RF COMMON INTERFACE(CI)

Connecting to your Haier TV(22",24",28")

CVBS, DVD Player or other machine with YPbPr/YCbCr.

B G R VIDEO Y DIGITAL AUDIO OUTPUT

R W R CVBS, DVD Player or other machine with CVBS/S-Video.

Audio/Video machine with HDMI interfaces

R Red (AUDIO-R, Pr/Cr)

Connecting to your Haier TV(32")

R Red (AUDIO-R, Pr/Cr)

CVBS, DVD Player or other machine with CVBS/S-Video.

W Y DIGITAL AUDIO OUTPUT

SCART CVBS, DVD Player or other machine with YPbPr/YCbCr.

R HEADPHONE Audio/Video machine with HDMI interfaces

Connecting to your Haier TV Connecting a DVD player / Satellite / cable set top box receiver / games console / PC or

Laptop There are several options to connecting a DVD player / Satellite or Cable set top box receiver / games console / PC or Laptop to your TV. Option 1 SCART Connect a SCART cable (not supplied) from the SCART socket on the TV to the DVD player / Satellite or cable set top box receiver or games consol. To select the device connected with the SCART cable press the SOURCE button on the remote and use the keys to select SCART and press the OK button. Note:- The TV will default to the SCART connection when the TV is switched on. Option 2 HDMI1/HDMI2 If the device you want to connect to the TV is switched on, switch off the device first. Connect a HDMI cable (not supplied) from the HDMI socket on the TV to the DVD player / Satellite or cable receiver or games consol. Switch on the device you have just connected to the TV To select the device connected with the HDMI cable press the SOURCE button on the remote and use the keys to select HDMI and press the OK button. Option 3 AV Audio Visual (Yellow/White/Red) Make sure that both TV and the device are switched off before connecting. Connect the AV cables (not supplied) from the Video (yellow) and Audio (white, red) sockets on the TV to the DVD player or games console etc. To select the device connected with the AV cable press the SOURCE button on the remote and use the keys to select AV and press the OK button. Option 4 COMPONENT (Green/Blue/Red)+(White/Red) Make sure that both TV and the device are switched off before connecting.

Connect the cables (not supplied) from the

COMPONENT IN sockets Y, Pb, Pr (green, blue, red) and L-Audio-R (white, red) on the TV to the DVD player or games console etc.

To select the device connected with the

Component cable press the SOURCE button on the remote and use the▼ ▲ keys to select YPbPr and press the OK button. Option 5

Connect a VGA cable (not supplied) from the

VGA socket on the TV to the PC / Laptop. To select the PC / Laptop connected with the VGA cable press the SOURCE button on the remote and use the keys to select PC and press the OK button. Note VGA is video only. For audio from your PC/Laptop you need to connect a separate cable from the PC Audio (3.5mm jack) to the headphone socket on you PC/Laptop (3.5mm jack) Option 6

USB Most USB sticks can be connected to your TV and some digital cameras may also work.

Connect USB stick (not supplied) or a USB cable (not supplied) to the TV. To select the USB device connected to the TV, press the SOURCE button on the remote and use the keys to select USB and press the OK button. Note1:Only *.jpg , *.mp3 , *.txt , *.avi ,*.mp4 , files will work, other file types are not guaranteed and may not. Note 2. Apple iPhones and iPods are not compatible with your TV. Note 3. When connecting any device to the USB connection, keep the USB cable length as short as possible. Option 7

HEADPHONE OUTPUT Insert the plug of the earphone into the headphone socket on the TV. The TV speakers are now muted.

Alternatively you can also plug in external speakers if required. Option 8

DIGITAL AUDIO OUT(COAXIAL)

COAXIAL is a digital audio connection used to connect audio equipment, for example home theatres and other digital HiFi systems over short distances. The signal is transmitted over either a coaxial cable with RCA connectors.

Make sure that both TV and the device are switched off before connecting. Connect the AV cables (not supplied) from the COAXIAL socket on the TV to the Home Theater sound system or digital HiFi system etc.

COMMON INTERFACE The common interface (CI) slot is designed to accept the conditional Access (CA) Module and

Smart card in order to view the pay TV programmes and additional services. Contact your Common Interface service provider to get more information about the modules and subscription. Please noted that CA modules and smart cards are neither supplied nor optional accessories from us.

Common Interface option.

Press to change picture aspect ratio.

Press to open the on-screen menu.In teletext mode,press to open the INDEX page.

Press to navigate the on-screen menu.

OK Press to confirm a selection.

In teletext mode,press to enter mix mode.

(reverse) Press to fast forward or reverse playback in multimedia mode and timeshift mode. (Red and

(forward) Green button in teletext mode)

Press to turn on/off the teletext function,and change TTX mode.

Press to play/pause in multimedia mode, (play/pause) timeshift in DTV mode. SOURCE

Press to change the channel.

P Press to display the channel information.

In teletext mode,press to revealthe hidden information.

3D WORLD No function.

Press to open the channel list.In teletext mode, press to size the teletext.

Press to open the input source list.

GUIDE Press to display electronic programme guide in TV mode. In teletext mode,press to enter a secondary page.

Press to close the on-screen menu.In teletext mode,press to hide the text.

(previous) Press to select previous or next file.(yellow and

(next) blue button in teletext mode) (REC) (Power)

Press to turn the TV on or off.

S.MODE Press to select the sound mode.

P.MODE Press to select the picture mode.

Press to enter a channel number or password.

Q.VIEW Press to switch to the last viewed channel.

SLEEP Press to set the sleep timer.

Press to adjust the volume level.

SUBTITLE Press to turn the sound on or off.

Press to select Mono,Nicam stereo for ATV channel.Select Audio language for DTV channel. Press to turn the subtitle on or off. Press to open a favorite channel list.In teletext mode,press to hold a page.

Press to record the TV program you are watching in DTV mode.

Press to stop multimedia playback,stop timeshift in DTV mode.

Insert Batteries into the Remote Contol

1. Remove the battery cover.

2. Inserting the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit. 3. Mount the battery cover. Replace with new batteries when the TV set begins to show the following symptoms:Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit. Remark: 1) Alkaline Battery Recommeded. 2) Remove batteries when they are exhausted or if the remote control is not to be used for long time.

TEXT DIRECT ACCESS TO THE ITEMS INDEX SUB CODE HOLD REVEAL EN-17

E Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language(cable networks, satellite channels, etc.)

This is used to call or exit teletext modes. The summary appears with a list of items that can be accessed. Each item has a corresponding 3 digit page number.

Enter the number of the page required using the 0 to 9 up/down. Example: page 120, enter 120. The number is displayed top left, the counter turns and then the page is displayed. Repeat this operation to view another page. If the counter continues to search, this means that the page is not transmitted. Select another number. Coloured are as are displayed at the bottom of the screen. The 4 coloured keys are used to access the items or corresponding pages. The coloured areas flash when the item or the page is not yet available. This returns to the contents page (usually page 100). Press the button and enter the 4-digit number to enter a secondary page. To freeze the page. To display or hide the concealed information (games solutions).

MIX This will superimpose the teletext data on top of the TV picture. Press button again to return to full text.

EXIT H ide the teletex t.

SIZE Switch the image to top,bottom,full.

The First Time Setup screen will appear when the TV is first switched

on or reset to the factory setting.

First Time Setup English Home Mode

1).Press the ▼▲ buttons to navigate the menu and ◀▶buttons to change the settings. Select your desired language ,Home/Shop

Mode to be displayed on the menu. HOME or Shop modes 1.When the unit is turn on for the very first time, it will show Initialization set-up menu. After the OSD language is set, the user can choose between "shop mode" and "home mode". When the screen shows the following setting menu and the cursor stays on the "home mode" choice, press ◀▶ to adjust, and "OK" to enter the menu.

Select the usage mode? shop mode is for shop usage only.

If "Shop mode" is choosen, the following menu will displayed.

Are you sure to change to

3). Channel tuning will commence. This operation may take up to some minutes. The display will show the progress of the tuning and the number of channels found.

4). If you want to skip the DTV tuning, press the MENU button to interrupt the tuning half way. You will then go straight to ATV tuning. 5). After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Programme Edit under the Channel menu.

Choose "OK" to enter the next prompt menu.

Home mode is the most energy mode.

OK In the UK to connect to cable TV you will require the appropriate cable TV's company's 'set top box' to be connected to the TV. Please refer to the cable TV's instructions manual for further details.

If you select DVB-C, you will select Full or Quick way to scan.Also you can select Auto Scan mode. DTV+ATV or DTV only, or ATV only.

DTV ATV Digital TV Analogue TV (not used in UK)

Choose "Cancel" to go back to the Initialization set-up menu, and the cursor will stay at the "home mode" choice. choose it to go the next menu to choose the country.

2). Press the ◀▶buttons to select AIR/Cable means DVB-T/DVB-C.

2). Press the ▼▲ buttons to select Auto Scan and then press the OK button.

3). Press the ◀▶buttons to select Antenna Type to Air means DVB-T.

Digital Channels Found:

DTV: 3 Radio: 0 Data: 0 Analog Channels Found: 0

1). Press the MENU button and then press the▼▲ buttons to select the CHANNEL menu and then press the OK button.

2). Press the▼▲ buttons to select Auto Tuning and then press the OK button,select Antenna Type to cable mean DVBC. Channel

4). In Country mode, press the ◀▶buttons to select the country where you will operate the TV.

5). In the Mode item, press the ◀▶buttons to select tune mode: ATV / DTV / DTV + ATV. Press the▼button to select

Start to start. 6). Channel tuning will commence. This operation may take up to some minutes. The display will show the progress of the

3). Press the▼button and then press the◀▶▼▲buttons to select the country you will operate the TV.

4). In the Mode menu, press the◀▶buttons to select ATV / DTV / DTV + ATV. 5). Select start to enter the menu as below, to select search mode.

tuning and the number of channels found.

7). If you want to skip the DTV tuning, press the MENU button to interrupt the tuning half way. You will then go

straight toATV tuning. You may repeat the above step if you also want to skip the ATV tuning. An installation reminder will appear the next time you turn on the TV, if no channel is found.

8). After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Programme Edit under the channel menu.

6). Channel tuning will commence. This operation may take up to some minutes. The display will show the progress of the tuning and the number of channels found.

7). If you want to skip the DTV tuning, press the MENU button to interrupt the tuning half way. You will then go straight to ATV tuning. You may repeat the above step if you also want to skip the ATV tuning. An installation reminder will appear the next time you turn on the TV,if no channel is found. 8). After tuning is complete, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Programme Edit under the channel menu.

All the channels including ATV, DTV and Radio can be tuning by one time,if the Tune Type is

DTV+ATV . All the stored channels will be disappear after auto tuning . After auto tuning , the channel will skip to the first DTV channel.

2. 1 )DTV Manual Tuning (DVB-T)

1). Press the MENU button and then press the▼▲ buttons to select the CHANNEL menu and then press the OK button. 2). Press the▼▲ buttons to select DTV Manual Tuning and then press the OK button,if you select Air in Auto Scan, you will enter DVB-T manual scan menu. Channel

2). The DVB-C Manual Tuning screen will pop up.

Press the▼▲buttons to select(Frequency /Symbol (ks/s/QAM Type ),press OK to input Frequency and symbol, press ◀▶to change QAM type, press Start to commence the search of that channel. When the signal has been tuned, the picture and signal strength will be displayed on the screen. 3). Press the MENU button to return back to the main menu. 4). Press the EXIT button to exit the menu.

3) ATV Manual tuning :

You can change the sound system, search the analog TV channels and fine tune the channels , then storage the channels you selected.

System BG Current CH1

3). The DTV Manual Tuning screen will pop up.

Press the ◀▶ buttons to select the desired UHF channel or press the OK button then input channel number. Select Start to commence the search of that channel. When the signal has been tuned, the picture and signal strength will be displayed on the screen. 4). Press the MENU button to return back to the main menu. 5). Press the EXIT button to exit the menu.

1. Press teletext red button to storage to channels after manual tuning .

2. If the number save to is the same as the number Current CH, when you press Red button,the save to number will cover the Current CH number. 4). Program edit: Press the ▲or▼ Buttons to select Program Edit in the Channel Menu. Then press the OK Button to enter the subMenu. Then you will need to select the program you wish to edit.

2. 2 )DTV Manual Tuning (DVB-C)

1). Press the MENU button and then press the▼▲ buttons to select the CHANNEL menu and then press the OK button.If you select Cable in Auto scan,you will enter DVBC manual scan menu.

2. PICTURE MENU Programme Edit

001 The HITS 002 TMF 003 UKTV Br’tldeas 004 f th 005 Ideal World 006 Colourbars100 001 Kiss 002 Smash Hits! 003 Kerrang! Delete

DTV DTV DTV DTV DTV DTV Radio

Delete: Press the Red Button to delete the channel you highlighted.

SKIP: Press the Yellow Button to select the Skip function and a SKIP icon will be displayed next to the program and it will be skipped when changing the channel. MOVE: Press the Green Button to highlight the select the channel you want to move. An icon will display ahead the channel number. Then press the ▼ / ▲ Buttons to a new position and press the Green Button to confirm. Rename: (For ATV only) Press the Blue Button for renaming the channel. Press the number key circularly to enter a new name and press the OK Button to confirm (the number key as the following table).

FAV: Press the FAV Button (instead of color Buttons) to set the favourite channel. (If you want to view the Favorite

Channel List you need to exit Program Edit Menu and then press the FAV Button.)

1).There are three colors temperature modes can be selected normal, warm, cool.

2).PC Setting is available in PC mode only which can adjust Horizontal position, vertical position, size and phase.

3.AUDIO MENU The third item of the MENU is the AUDIO MENU.

You can adjust the sound effect here such as treble, bass, balance etc. Press ▼▲ to move, press ◀▶ to adjust. Channel Picture

6). Signal Information (Only for DTV)

Press the ▼ or ▲ Buttons to select Software Update (USB) in the Channel Menu. Then press the OK Button to update software by using a USB. Follow the software upgrade instructions provided with the software.

Note: We recommend you perform a factory reset (refer to Restore Factory Default in Setup menu) to ensure the unit is successfully upgraded.

This menu can display the CI card' s information.

Press the ▼ / ▲ Buttons to select the Signal Information in the Channel Menu. Then press the OK Button to show the related information of the current channel.

The second item of the MENU is PICTURE MENU.

You can adjust picture effect here, such as contrast, brightness, etc. Press ▼▲ to move, press ◀▶ to adjust.

1.Auto volume: only available when the input signal volume is too large or distortion.

2. Audio Only: set on to turn off the TV screen, and then you can listen TV.

4.CLOCK MENU The fourth item of the menu is the CLOCK MENU You can adjust the clock, power on/off time, sleep timer etc .Press ▼▲ to move, press OK to adjust.

Move Left Move Right OK Select

If after 15 minutes there is no signal input, the TV will switch off to Auto Sleep, when the Auto Sleep function is set to ON. The clock time is automatically set when the TV is able to receive DTV.

5.SETUP MENU The fifth item of the MENU is the SETUP MENU. You can adjust the OSD language, Audio language,Subtitle language etc.

The sixth item of the menu is the LOCK MENU You can lock system, set password, block program and set parental guidance Once you set the lock system on you can not search the channels or change any programs.

Restore factory default will clear all the programs and password.

6.LOCK MENU E nglish

Timeshift Record Time: To set the max Timeshift

Record Time. Auto Standby (4hr): To set the unit to standby after any 4hours operation. Mode Setting: To set Home mode or Shop mode. HDMI CEC Cntrol: To set CEC function to on or off. OSD Time: Press ◄ or ► to select the menu display time. Restore Factory Default Press the ▼ or ▲ Buttons to select Restore Factory Default and press the OK Button to enter the first setup. Once confirmed, all the settings will be cleared. This should be used if you experience any issues with your TV.

OK Auto Standby(4hr)

1.If after 4 hours from switch on and no changes have been made to the TV, for example no channel or volume changes,the TV will start the automatic power down sequence. And pop-up window will appear on screen. After 150 seconds the TV will automatically switch to standby. To override the automatic shutdown press any button on the remote control. 2. To cancel the automatic power-down On the Option Menu select Auto standby(4hr),The TV screen returns to the Option Menu and Auto standby (4hr) option will display. Auto standby (4hr) OFF To return to auto shutdown after 4 hours repeat the above except use the left arrow key to select on(4 hours).

OK OK The default pass word is 0000, If you forget the password, you can use the super password:9443.

Channel Locks: Press ▼▲ to choose the program ,press OK button to block the program. If you want unblock the program, pls enter the main menu , input the password,choose the program,then press OK button again. Parental Rating: Press ◀▶to choose rating.

In PVR File system menu you can set up USB disk for PVR.

7.EPG Menu(Electronic Program Guide)

The EPG (Electronic Programme Guide) Menu provides you with detailed broadcast program information. Press the EPG Button and a pop-up Menu will be displayed with program information about the channel you are currently watching. You will be able to see up to seven days of program information. To view the next day or more use the ▲ or ▼ Buttons to highlight the date and then press the ◄ or ► Buttons to scroll through the available dates. PROGRAM GUIDE 2010/04/29 02 : 19 001 Nine Digital 002 Nine Digital ... 003 GO!

Please ensure a compatible Hard Disc Drive or USB device is inserted into the USB input to schedule recordings. If your storage device is not compatible, you will be asked to format it. In Setup menu, enter the PVR File

System Menu Device List to format your device. WARNING When formatting the USB device it will delete all the files stored on the USB device. If you have set a timed recording, your TV will automatically

turn on when the program is set to record and will automatically turn off after the recording is complete.

During a timed recording however the picture and volume will be mute (there will be no display), however the unit will be on. You can press the STANDBY Button to turn the

picture and volume back on.

In the EPG Menu, press the BLUE Button to set a program

To see what is going to be broadcast after the current program, press Yellow (Schedule) Button. To view a different channel, use the ▲ or ▼ Buttons to highlight the channel and then press the ◄ or ► Buttons. To exit the

reminder. The below Reminder Menu will then be displayed and you can use the ◄or ► Buttons to set the program reminder details. You will be able to set reminder to occur once, Daily or Weekly.

OK You may press Red button to view the scheduled programs

list. Also you may delete the programs you have scheduled.

Please refer to the bottom of the EPG screen

In the EPG Menu, press the GREEN Button to view more

for the basic remote control key functions.

information about the current program.

In EPG mode, press the Red Button on the remote control to select a program to be recorded. You will then enter Scheduled Record menu for record setting. (Refer to the section of PVR file system.)

8.PVR File System (only for DTV)

Press Menu Key,select setup submenu.Press the ▼ or ▲ Buttons to select PVR File System, then press the OK Button to enter sub-Menu and then use the ◄ or ► Buttons to scroll through the options.

Prepare to record the program:

Scheduled Record - Group 1

Setting Is Not In Use

File Manager: You may view all the recorded programs here. Press blue key to play with full screen.

To record the program you are currently watching press the REC Button and a red REC icon will appear on the screen. The record time/ length and remaining record time will be displayed in the menu below. Recording

Current Playing File Into

BBC ONE Channel Name

Matt Baker and Clare Balding present coverage of the eager...

Device List: This sub menu will list the USB devices connected to the TV set. You can select the device and then press red button to format the USB device.

Device List Device Available Space File System sda1

To reveal the menu press the REC Button again.

To stop recording, press the Stop Button. You may also enter the Media Player Menu to view your recorded programs via Movie mode. Play the recording: The program recorded on the “USB”will be saved in the folder “USB record” on the device. You can play it in PVR File System and in File manager submenu.

Scheduled Record: You may set the scheduled record

List here. And you may also delete the scheduled records you have set. Scheduled Record Setting List Scheduled Record Sched

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Off Off Off Off Off Off Off Off Off Off Off Off Off Off Off

Date Start Time Duration

1.The USB storage size can be between

128MB and 500GB in size, but for practical use 2GB to 500GB is recommended. 2. Video may become pixelated when Video bit rate is too low. This can be caused by connecting a USB extension cable instead of plugging the USB directly into the TV. 3. Not all USB devices are compatible. Below is a list of recommended USB drives. Models that are not listed may be compatible, but it is not guaranteed to work. The USB support list are the same as Timeshift function, see the following pages for details.

Enter the sub menu you may set the recording frequency as Once, Daily, Weekly, Weekday, or off.

Ensure the storage device used to record is inserted into the USB Input on the back of the unit and is compatible for recording. If your storage device is not compatible, you will be asked to format it. Enter the PVR File System menu and select Device List to format your device.

During recording, only the Stop functions is available. There will be no record function,when the channel is CI+ channel.

Press the ▶ Button to pause the program you are watching to activate Time Shift function. The below menu will be displayed. This Menu will auto disappear after several seconds. 00:00:00 00:00:05

Choose the ▶ option and press OK to resume playing, and a white play icon will appear at the right of the screen, which shows that time shift is being performed.

When the menu disappeared,press the▶ button,the menu will appear again. To stoptime shifting, press the Stop Button or move the cursor to select the Stop option when the menu is on, and then follow the pop-up guide.  Ensure the storage device used for recording is inserted into the USB Input on the back of the unit and is compatible for recording. If your storage device is not compatible, you will be asked to format it. In Setup menu, enter the PVR File System submenu and select Device List to format your device.  All the functions (Play, FB, FF, Pause and Stop) in the menu can only be performed when the menu is on. There will be no Timeshift function when the channel is CI+ channel.

Record file Playback

The Haier TV records the program on the USB stick in *.ts format "Time Shift". If another TV, PC, Laptop, DVD, or any other device or peripherals do not support or recognise the *.ts (time shift) file then it will not play. "ts" is the format used to broadcast high-definition TV. You can play "ts" files on a computer or laptop with the correct software. Refer to the Internet or or an IT supplier more information about the most appropriate software. Caution: Haier does not take any responsibility for any software downloaded by any customer or retailer and may contain viruses or for any malfunction resulting of installing the software. The customer uses it at their own risk.

Press source key, and select USB in source list, press OK button to enter the USB menu. Please make sure that the USB device have plugged in the slot.There are four type media item can be selected, such as photo, music, Movie, and text. Select the type media item by pressing ◄► , press OK button to enter the disk selection menu. Haier Innovation Life

PHOTO MUSIC MOVIE Usb2.0

Press the▼/▲to select the right disk and folder,press OK to enter the media files list . Press Red button to back to the media type selection menu.

Select the media file by pressing ◄► or▼ ▲ , then the preview frame will pop up.Press the ► button to play the media file in full screen.When the movie file is playing,press the ▼ button can display the control bar. Photo USB1/Pic

PHOTO Basic Function

When photos are playing, press “ ▼”key on the remote control, a help bar will display under the screen.

Press”Play/Pause”key on the remote control to play or pause.

Press”Left”key on the remote control to read the previous photo.

Press”Right”key on the remote control to read the next photo.

press”stop”key to stop playing and return to the previous menu.

Press”up/down”key to Rotate the photo.

Press Blue key, you can enter Quick Menu to adjust Interval time,Repeat,slideshow effect, and Background Music(you may play music first).

10547672.mp3 14953359.mp3

Album: Artist: Track Year: 2010-09-30

MUSIC When music are playing, press “►” key to select toolbar.

Basic Function FB:Press”Left/Right”key on the remote control to select this function,press”ok” key to to fast back. Press”PLAY”key to play normally. FF:Press”Left/Right”key on the remote control to select this function,press”ok” key to fast forward. Press”PLAY”key to play normally. Back ground music:Press”Left/Right”key on the remote control to select this function,press”ok” key to turn on / off. Other functions are similar to the ”PHOTO”, Please refer to ”PHOTO” options. MOVIE The operations are similar to the ”PHOTO”.Please refer to ”PHOTO” options. Basic Function Set A:Press”Left/Right”key on the remote control to select this function,press”ok” key to set A and B, the film will circulating play in the time of A to B. Zoom in:Press”Left/Right”key on the remote control to select this function,press”ok” key to enlarge picture.(if the document is larger than 1920x1080,this function is unsupported.) Zoom out:Press”Left/Right”key on the remote control to select this function,press”ok” key to reduce picture.(This function does not support more than 1920x1080 HD video.) Select Time:Press”Left/Right”key on the remote control to select this function,press”ok” key to select the time to play.

TEXT Press”▼ /▲” to select previous / next page, Input the number key and OK to jump to the page you want.

Provide list of major file types that play from a USB device Photo Audio Video Text

Trouble phenomenon Symptom Inspection Check Picture

antenna position, direction or connection

electronic equipment,car/ motorcycle,fluorescent light

Volume(check if mute is activated or if the audio system connections are not correct)

Power cord is not inserted Power switch is not opened Contrast and brightness/volume setup Press standby key on the remote control for inspecting

Normal audio or weak

There is black bar on top and bottom

Change aspect to zoom

My TV does not display the picture on my laptop / PC when connected.

I have connected my PC/Laptop to the TV and get a picture but no sound. Why ?

Most PC's and laptops when connected with a VGA Plug (the blue 15 pin plug on your PC or laptop) require you to press some buttons on your key board to get a picture on a TV or other external display. This is usually the F7 (Dell) or F4 (HP /

Samsung) or F5 (Toshiba). On laptops, you have to press the “Fn” key at the same time as the “F” key. The VGA cable only carries the video or picture information. You need to connect a separate cable connected to the earphone socket (3.5mm jack) on you PC/Laptop to the 3.5m (PC Audio IN) socket on your TV. You will need to select “PC” using the Source button on your remote. Alternatively connect your PC/Laptop using a HDMI cable if you PC/Laptop has a HDMI connector. HDMI is both audio and video.

The picture is not auto resizing when changing channels.

Check that the TV picture Aspect Ratio is set to 'Auto' on all inputs ATV, DTV, SCART, HDMI 1, 2 etc.

To set the aspect ratio, (Auto, 4:3 or 16:9). Press Source button start at ATV and repeat the sequence below for all input sources ATV, DTV, SCART, HDMI 1 and 2 as each input source is controlled separately. Press TV Menu button Press Right Arrow to access Picture sub menu Press Down Arrow to select Aspect Ratio Select Auto Press Exit Repeat for all input sources.

I have just plugged in a DVD player or another item into my TV and it doesn't work.

This is applicable to any item of equipment plugged to the TV

1. Turn both TV & DVD player off (plugs out of the wall socket, not standby). 2. Turn off any equipment connected to the SCART socket. 3. Disconnect the SCART plug from the TV. 4. Plug in and turn TV on 5. Plug in and turn DVD player on 6. Select HDMI from Source Menu 7. Press play on DVD player and check movie plays ok NOTE: The SCART socket has priority over HDMI and it is important that the equipment connected to the SCART socket on the TV is switched OFF (not in standby). Please follow this information. If the advice works and the DVD player works, the TV is OK it is just a bit confused. Probably HDMI plugs have been removed and plugged back in when the TV is switched on. Never remove or plug in HDMI cables or any digital equipment with the equipment switched on. Always switch off all equipment when unplugging or connecting any digital equipment.

Trouble Shooting Digital TV Problems and possible Solutions.

Picture Breaks into Pixels A typical example of a reception problem includes the break up of pictures (pixilation) or the picture freezing, sometimes there are clicking or squeaking sounds or the sound drops out or there is NO reception at all. Your picture may break into pixels due to the digital video signal dropping. The signal dropping may occur because of either problems with weak signals (see TV Aerials) or if you are connected by cable a weak cable signal. If the problem is weak signals, use an amplifier to strengthen the signal. A cable technician can help you install an inline amplifier or a pre-amplifier. This will boost your signal strength and fix the pixel problem. If you are receiving your TV signal by satellite, check your dish has not moved following high winds, or that the signal is blocked by trees. Trees can be a problem as the TV signal can change depending if a tree between the satellite dish and satellite is in bare or in full leaf. Missing channels It may be that you find that there are channels missing, or you're receiving channels from the wrong region. Sometimes the interactive services (red button) doesn't work. This is usually caused by weak signal, see TV Aerials TV Aerials Digital terrestrial television (Freeview) comes to your TV via an aerial, The old aerial that was good for analogue TV may not work well for digital so may need upgrading. If you are getting some but not all of the digital channels on DTV (Freeview) for example you get BBC1, BBC2, Channel 4 ,but not ITV or Channel 5, this is usually because your aerial is a narrow band type, and needs to be changed to a wide band type. Faulty Leads and Cables Check your TV. Are the leads at the back - to the mains, the aerial, the set-top box, the video or DVD player or recorder properly connected? SCART leads are known to work loose over time and can result in both audio and video (picture) problems. Either left or right or both audio is missing and the colours are poor or muddy looking. Push the SCART plugs firmly in, this should fix the problem. HDMI plugs need to be pushed in firmly; it's only the last millimetre that the contacts make. Typically the black plastic part of the HDMI plug should be very close or touching the body of the TV or component. When plugging in any HDMI cables you may experience problems if the HDMI cables are plugged in when the TV or the other component is switched on. Always switch off both the TV and the component you are plugging in. If you have checked the plugs and sockets, switch off the TV and whatever you have plugged in to the TV and then switch them on again. I have connected my PC to the TV. There is no sound. If you connect your PC or Laptop to the TV using a VGA (15 pin Sub D) cable there is no audio, you need to connect a separate audio cable to the TV from the PC or laptop. Unnatural Colours and Flesh Tones Unnatural flesh tones and other colours could present another problem even in a new HDTV. This is due to the TV picture settings, which are optimized for a showroom environment. Fix this by changing the picture mode to natural in the picture menu. For more precision, try manually setting the colour, contrast and brightness options in the picture menu. White Outlines White outlines around objects and people generally appear either if the TV sharpness is set to very high, or if your television set uses some edge-enhancement processing technology. Go to the picture menu and adjust the sharpness till the white outline disappears. If edge-enhancement is enabled, try to disable it using the service menu. Choppy Video At times the video might become choppy. When this happens, check whether the signal is strong enough. If the signal is strong the problem is with the cable operator. If the signal strength is weak, try boosting the signal strength with the help of an amplifier. The picture does not fill the screen When connecting PC's or laptops to the TV, the picture may not fill the screen. Check the display settings on your PC or laptop (Windows > Start > Control Panel > Appearance and Personalization > Display settings) and select the best resolution. On your TV select:- TV Menu > Picture > Settings and then try AUTO, ZOOM1 or ZOOM2 for the best display. USB Connection The USB connection will work with *.jpg (photo) and *.mp3 (music) files. Please note the TV does not recognize Apple iPhone, or iPod's connected to the USB connector on the TV. The TV may play other files, but due to the multiple different file formats, there is no guarantee that these other file formats will work.

22" FULL HD 1080p Digital LED LCD TV Television picture quality:

FULL HD Integrated digital.

Screen Size: 55cm Resolution 1920x1080 pixels 50Hz.

1 SCART socket. PC input socket. Component video socket. Composite. 1 USB port. 1 Headphone port. 1 COAXIAL port. Supported Systems:PAL+SECAM Storage channel number: 1000(DTV),100(ATV) TV(RF):75Ω Imbalance AV Video-Input:75Ω,1V-P,RCA AV Audio-Input:20KΩ,500mB RMS YPbPr/HDMI Video Input:480i, 480p, 576i, 576p, 720p, 1080i, 1080p

NICAM stereo sound system.

2 x 3 watts RMS power output.

Standby Power consumption

<0.30W Digital features:

Digitally interactive.

Digital text. Digital video broadcasting (DVB) subtitles available. Auto setup. Auto scan for new channels. Now and next programme guide. 7 day electronic programme guide (EPG). Top up TV compatible. CI slot. Audio description compatible.

UHF/VHF tuner;Sleep timer; Parental Rating ;Picture and text

Remote control batteries required 2 x AAA (included). Additional features: VESA Mount Size: 100 x 100 mm Package Size (WxHxD): 616x426x135mm Set Size (WxHxD) with Stand: 513x355 x160 mm Set Size (WxHxD) without Stand: 513x312x42 mm Package weight : 4.1 kg Set weight with stand: 2.9kg Set weight without stand: 2.7 kg * The part specifications of this TV set provided here are for reference only. Difierences may occur as product technology is updated. Design and specifications are subject to change without notice. Scart Output description : 1. When current source is ATV/AV/SCART, scart output signal is ATV. 2. When current source is DTV, there will be no SCART output signal. 3. Other source have no SCART output signal.

24" FULL HD 1080p Digital LED LCD TV Television picture quality:

FULL HD Integrated digital.

Screen Size: 59.9cm Resolution 1920x1080 pixels 50Hz.

NICAM stereo sound system.

2 x 3 watts RMS power output.

Standby Power consumption

<0.30W Digital features:

Digitally interactive.

Additional features:

UHF/VHF tuner;Sleep timer; Parental Rating ;Picture and text

Remote control batteries required 2 x AAA (included). VESA Mount Size: 100 x 100 mm Package Size (WxHxD): 650x440x135 mm Set Size (WxHxD) with Stand: 568x386x160 mm Set Size (WxHxD) without Stand: 568x344x42 mm Package weight : 4.9 kg Set weight with stand: 3.74kg Set weight without stand: 3.5 kg

* The part specifications of this TV set provided here are for reference only.

Difierences may occur as product technology is updated. Design and specifications are subject to change without notice. Scart Output description : 1. When current source is ATV/AV/SCART, scart output signal is ATV. 2. When current source is DTV, there will be no SCART output signal. 3. Other source have no SCART output signal.

28" HD Ready Digital LED LCD TV Television picture quality:

Integrated digital. Screen Size: 70 cm Resolution 1366x768 pixels 50Hz.

NICAM stereo sound system.

2 x 8watts RMS power output.

Standby Power consumption

<0.30W Digital features:

Digitally interactive.

Additional features:

UHF/VHF tuner;Sleep timer; Parental Rating ;Picture and text

Remote control batteries required 2 x AAA (included). VESA Mount Size: 200 x 100 mm Package Size (WxHxD): 810x480x120mm Set Size (WxHxD) with Stand: 642x435x170mm Set Size (WxHxD) without Stand: 642x390x44mm Package weight : 6.5 kg Set weight with stand: 5.3 kg Set weight without stand: 5.0 kg

* The part specifications of this TV set provided here are for reference only.

32" HD Ready Digital LED LCD TV Television picture quality:

Integrated digital. Screen Size: 81cm Resolution 1366x768 pixels 50Hz.

NICAM stereo sound system.

2 x 8watts RMS power output.

Standby Power consumption

<0.30W Digital features:

Digitally interactive.

Additional features:

UHF/VHF tuner;Sleep timer; Parental Rating ;Picture and text

Remote control batteries required 2 x AAA (included). VESA Mount Size: 200 x 100 mm Package Size (WxHxD): 880x550x137mm Set Size (WxHxD) with Stand: 738.5x487.5x170mm Set Size (WxHxD) without Stand: 738.5x443x64mm Package weight : 6.8 kg Set weight with stand: 5.0 kg Set weight without stand: 4.7 kg

* The part specifications of this TV set provided here are for reference only.

Fernseher anschließen

05 Störungserkennung

04 Bedienungshinweise

DIGITAL AUDIO OUTPUT

HEADPHONE PC AUDIO VGA RF COMMON INTERFACE(CI)

DIGITAL AUDIO OUTPUT

R DIGITAL AUDIO OUTPUT

SCART INDEX UNTERCODE HOLD DTV DTV DTV DTV DTV DTV Radio

Matt Baker and Clare Balding present coverage of the eager...

PC Affichage supporté

FR RESOLUTION V. Fréq. (KHz)

DIGITAL AUDIO OUTPUT

Headphone Common Interface (CI)

Audio PC Entrée VGA ANT DIGITAL AUDIO OUTPUT

HEADPHONE PC AUDIO VGA RF COMMON INTERFACE(CI)

HDMI1 Headphone Common Interface (CI) Audio PC Entrée VGA ANT

DIGITAL AUDIO OUTPUT

R W R W Blanc (AUDIO-L)

R Rouge (AUDIO-R, Pr/Cr) Y Jaune (VIDEO)

DIGITAL AUDIO OUTPUT

SCART VGA (Sub-D 15 broches)

INDEX SOUS CODE HOLD REVEAL Select the usage mode? shop mode is for shop usage only.

DTV DTV DTV DTV DTV DTV Radio

Paramètres PVR Activer

Matt Baker and Clare Balding present coverage of the eager...

Désactiver Désactiver Désactiver Désactiver Désactiver Désactiver Désactiver Désactiver Désactiver Désactiver Désactiver Désactiver Désactiver Désactiver Désactiver

PAL-B/G, I, D/K SECAM-B/G, D/K, L

1000 (DTV),100 (ATV)

DIGITAL AUDIO OUTPUT

HEADPHONE PC AUDIO VGA RF COMMON INTERFACE(CI)

DIGITAL AUDIO OUTPUT

B Blauw (Pb/Cb) W Wit (AUDIO-L ) R Rood (AUDIO-R, Pr/Cr) Y Geel (VIDEO)

DIGITAL AUDIO OUTPUT

DTV ATV DTV DTV DTV DTV DTV DTV Radio

Matt Baker and Clare Balding present coverage of the eager...

10547672.mp3 14953359.mp3

Album: Artist: Track Year: 2010-09-30

PAL-B/G, I, D/K SECAM-B/G, D/K, L PAL/SECAM/MPEG2/MPEG4/H.264

1000 (DTV),100 (ATV) AC 100-240V 50/60Hz 38 W <0.30W

2 x 8W DIGITAL AUDIO OUTPUT

DIGITAL AUDIO OUTPUT

HEADPHONE PC AUDIO VGA RF COMMON INTERFACE(CI)

DIGITAL AUDIO OUTPUT

B Azul (Pb/Cb) W Blanco (AUDIO-L ) R Rojo (AUDIO-R, Pr/Cr) Y Amarillo (VIDEO)

DIGITAL AUDIO OUTPUT

SCART Q.VIEW SLEEP VOL +/-

Select the usage mode? shop mode is for shop usage only.

DTV DTV DTV DTV DTV DTV Radio

002 Nine Digital ... 003 GO!

Matt Baker and Clare Balding present coverage of the eager...

TV LED LCD 28" HD Digital

TV LED LCD 32" HD Digital

50/60Hz 38W 40W 41W <0.30W 2x3W 2x3W 2x8W Analogico RGB (PC) x1; PC audio x1 High-Definition Multimedia Interface (HDMI) x 2 Ingresso composito x 1 YPbPr x 1 Ingresso SCART x 1 CI x 1 USB x 1 RF Co-Ax x 1 Cuffia x 1 COASSIALE x 1 Uscita SCART x 1 Ingresso video composito >=350 YPbPr >=400

Sistema TV DIGITAL AUDIO OUTPUT

DIGITAL AUDIO OUTPUT

HEADPHONE PC AUDIO VGA RF COMMON INTERFACE(CI)

DIGITAL AUDIO OUTPUT

R W Bianco (AUDIO-L)

R Red (AUDIO-R, Pr/Cr) Y Giallo (VIDEO)

DIGITAL AUDIO OUTPUT

SCART USCITA AUDIO DIGITALE (COASSIALE)

Select the usage mode?

Shop mode is for shop usage only.

Are you sure to change to

Shop mode? Annullare

TV analogica (non in UK)

Home use is the most energy mode.

OK DTV DTV DTV DTV DTV DTV Radio

Controllo HDMI CEC On

8.File System PVR (solo per DTV Standard

BBC ONE_Olympics 2012_20120808_114427.ts

00:08:06 Matt Baker and Clare Balding present coverage of the eager...

Off Off Off Off Off Off Off Off Off Off Off Off Off Off Off

NICAM stereo sound system.

2 x 3watts RMS power output.

Digitally interactive.

Funzioni supplementari:

NICAM stereo sound system.

2 x 3watts RMS power output.

Digitally interactive.

Funzioni supplementari:

NICAM stereo sound system.

2 x 8watts RMS power output.

Digitally interactive.

Funzioni supplementari:

NICAM stereo sound system.

2 x 8watts RMS power output.

Digitally interactive.

Funzioni supplementari:

D811 R881 NC/FR107 NC/1M/1206

PWM NC FBX ISET FB SDB SDBX AGND VCC EN

BL-ADJUST CH6 AP3608E CH5

PWM NC FBX ISET FB SDB SDBX AGND VCC EN LED7

BL-ADJUST AP3608E PGND1

101-0805 C23䎳݀ᵓϡϔḋ ݀ᵓ0603 ᴀᵓᬍ0805

0.1uF-50V-K-0805(X7R)

RT8296A FB VIN C1040

echo gp301 > /dev/sisgpio echo gp300 > /dev/sisgpio

+12VB SIS_PSON OVP L806

3uH-5A R65 0.3-1/4W-J-1206

R68 0.3-1/4W-J-1206 R69 0.3-1/4W-J-1206 FB1

TO252-DPAK U4ϡ䌈ǄD10ϡᦦ

10K R898,R900,R901,R902䎳݀ᵓϡϔḋ ݀ᵓ0603 ᴀᵓᬍ0402

2 3 4 5 6 7 8 9 10 11 12

0.1uF-50V-K-0805(X7R)

1 CN2 ⫼Ѣ18.5੠21.6 U3

RT CS AGND SHDN FB COMP SS C1021

5 LED_G LCDVDD_EN TP16

HP_DET AI2C_SCL AI2C_SDA C258

1K CF_WP_N CODE FLASH R95

HDMIB_SCL HDMIB_SDA VGA_SCL VGA_SDA NC/HDMIC_SCL NC/HDMIC_SDA DDC I2C UM_MS_SCL UM_MS_SDA LRSYNC LVDSA_TX0P LVDSA_TX0N LVDSA_TX1P LVDSA_TX1N LVDSA_TX2P LVDSA_TX2N LVDSA_CLKP LVDSA_CLKN LVDSA_TX3P LVDSA_TX3N LVDSA_TX4P LVDSA_TX4N LVDS SPI_CLK SPI_DO SA_GPIO26

SA_GPIO27/PWM0 SA_GPIO28 SA_GPIO29/SPI_CS1

SA_GPIO15/CF_WP_N SA_GPIO16/25MCK_IN SA_GPIO17

SA_GPIO10 SA_GPIO11 SA_GPIO12 SA_GPIO13 SA_GPIO14

SA_GPIO6/SPK_MUTE SA_GPIO7/SPK_EN SA_GPIO8/HP_DET SA_GPIO1/MAIN_LED SA_GPIO2/LCDVDD_EN PWM1

ENTEST ENDEBUG AUX_PWROK PWRBTN_N OSCI_24M OSCO_24M U16A

WP_N 3 2 SIS_SPI_DO SIS_SPI_CS0_N 1

11 SPK_MUTE_N GND R252

1K SIS_MS_SCL SIS_MS_SDA GND

HW TrapV_3.3V_AUX System

23 22 21 SOP8-VCC SOP8-HOLD SOP8-CLK SOP8-DI SOP8-CS SOP8-DO SOP8-WP/Vpp

M21 M23 M22 L21 L22 K21 K22 K23 J21 J23 J22

U22 T21 T22 T23 R21 R23 R22 P21 P22 N21 N22

4 6 8 2 4 6 8 2 4 6 8

RXE1+ RXE2+ RXEC+ RXE3+ RXE4+

SIS_LVDSA_TX0_DP SIS_LVDSA_TX0_DN SIS_LVDSA_TX1_DP SIS_LVDSA_TX1_DN SIS_LVDSA_TX2_DP SIS_LVDSA_TX2_DN SIS_LVDSA_CLK_DP SIS_LVDSA_CLK_DN SIS_LVDSA_TX3_DP SIS_LVDSA_TX3_DN SIS_LVDSA_TX4_DP SIS_LVDSA_TX4_DN C1

AUXOK SIS_VGA_SCL SIS_VGA_SDA SIS_HDMIB_SCL SIS_HDMIB_SDA

1 3 5 7 47RX4 1 3 5 47RX4 7 1 3 5 7

1 3 5 7 47RX4 1 3 5 7 47RX4 1 3 5 7

33R FLASH_SPI_DI 33R SIS_SPI_DO

33R SIS_SPI_CS0_N SIS_MS_SCL SIS_MS_SDA RP28

1 3 5 7 1 3 5 7 1 3 5 7

2 4 6 8 2 4 6 8 2 4 6 8

1 3 5 7 1 3 5 7 1 3 5 7

2 4 6 8 2 4 6 8 2 4 6 8

2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

SIS_LVDSA_TX3_DP 4 SIS_LVDSA_TX4_DP 4

SIS_LVDSA_TX0_DP SIS_LVDSA_TX1_DP SIS_LVDSA_TX2_DP LVDS_MODE_SET V_12/5V_LCD RXE0RXE1RXE2RXECRXE3RXE4-

SIS_MS_SCL SIS_MS_SDA CN14

SIS_LVDSA_TX0_DN SIS_LVDSA_TX1_DN SIS_LVDSA_TX2_DN SIS_LVDSA_CLK_DN SIS_LVDSA_TX3_DN SIS_LVDSA_TX4_DN RXE0+

echo gp021 > /dev/sisgpio echo gp020 > /dev/sisgpio

L3⬅4.7uHᬍЎ2.2uH ᬍ୘3.3V㒍⊶⬉य़

Power on max 50mA Standby 15mA

HDMI_ARC GND DDR_MA0

DDR_MA1 DDR_MA2 DDR_MA3 DDR_MA4 DDR_MA5 DDR_MA6 DDR_MA7 DDR_MA8 DDR_MA9 DDR_MA10 DDR_MA11 DDR_MA12 DDR_MA13

W23 W18 Y18 W21 W16 V23 V16 W19 V17 Y23 V21 Y21 Y17 Y19 W22 W20

PLACE THIS COMPONENTS CLOSE TO SIS330

AB17 AA11 AA17 AA10 AA16 AC10 AC16 AB20 AC13 AA22 AA13 AC20 AC14 AB21 AB14

B3 E1 G8 J2 J8 M1 M9 P1 P9 T1 T9

B9 D1 D8 E2 E8 F9 G1 G9

A8 C1 C9 D2 E9 F1 H2 H9

B2 D9 K2 K8 N1 N9 R1 R9

VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ VSSQ NC NC NC NC NC NC ZQ VREFDQ VREFCA CK CK#

A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13

NT5CB64M16HP-DI DRAM DDR_MA0

DDR_MA1 DDR_MA2 DDR_MA3 DDR_MA4 DDR_MA5 DDR_MA6 DDR_MA7 DDR_MA8 DDR_MA9 DDR_MA10 DDR_MA11 DDR_MA12 DDR_MA13

P7 P3 N2 P8 P2 R8 R2 T8 R3 L7 R7 N7 T3

F7 F2 F8 H3 H8 G2 H7 D7 C3 C8 C2 A7 A2 B8 A3

R253 LVDS_MODE_SET SCART_FUNSEL_SHIFT YPP_FBI0

V_1.5V C117 0.1uF(X7R)

GND DDR_RST_N GND V_1.5V

SIS_YPP_G1 7 SIS_YPP_B1 7 SIS_YPP_SOG1 7

USBA_DP USBA_DM NC NC NC KEY2

YPP_REXT VGA_HS VGA_VS No ball/HDMIC_RXP0

NC/HDMIC_RXN0 NC/HDMIC_RXP1 NC/HDMIC_RXN1 NC/HDMIC_RXP2 NC/HDMIC_RXN2

NC/HDMIC_RXCP NC/HDMIC_RXCN NC/HDMIC_HPD G1

G2 H1 H2 J1 J2 F1 F2 F3

R2 T1 T2 U1 U2 P1 P2

ATV_CVBSO ATV_COMP ATV_RSET AV_CVBSO ANALOG VIDEO IN/OUT C118 0.1uF(X7R)

500_1%HDMI_RSET HDMI_CEC SIS_HDMIA_HPD SIS_HDMIB_HPD R57

L2 M1 M2 N1 N2 K1 K2

9 DMIFGAIN DVD_CVBS AV1

CI_D1 CI_D2 CI_D3 CI_D4 CI_D5 CI_D6 CI_D7 CI_ADD0 CI_ADD1 CI_ADD2 CI_ADD3 CI_ADD4 CI_ADD5 CI_ADD6 CI_ADD7 CI_ADD8 CI_ADD9 CI_ADD10 CI_ADD11

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

PC_AUDIO_R PC_AUDIO_L DVD_AUDIO_R DVD_AUDIO_L SCART_AUDIO_R SCART_AUDIO_L

Ў䗮䖛CI+1.2⌟䆩ݐᆍᗻ⌟䆩 ߴ䰸V3ǃY6㛮㛮Ϟⱘ㔥㒰 ᑊ๲ࡴR216ǃR222ܗӊ 10 CI_WE_N 10 CI_OE_N 10 CI_WAIT_N 10 CI_RESET 10 CI_IRQ_N 10 CI_CE1_N 10 CI_IORD_N 10 CI_IOWR_N 10 CI_CD2_N 10 CI_CD1_N

4 LED_G HP_R HP_L GND

CATS_DAT1 CATS_DAT2 CATS_DAT3 CATS_DAT4 CATS_DAT5 CATS_DAT6 CATS_DAT7

TS_DAT2/SM_GPIO37 TS_DAT3/SM_GPIO38 TS_DAT4/SM_GPIO39 TS_DAT5/SM_GPIO40 TS_DAT6/SM_GPIO41 TS_DAT7/SM_GPIO42

I2S_OUT_CLK I2S_MCLK I2S_OUT_WS I2S_OUT_SD0_SPK I2S_OUT_SD1_LINEOUT I2S_OUT_SD2

AUDIO I2S OUTPUT SPDIF_OUT SIF LINE_OUT_R LINE_OUT_L SPK_R SPK_L SPDIF OUTPUT AUDIO INPUT SIF INPUT/OUTPUT AUDIO CI_DAT0/UM_GPIO47

CI_DAT1/UM_GPIO48 CI_DAT2/UM_GPIO49 CI_DAT3/UM_GPIO50 CI_DAT4/UM_GPIO51 CI_DAT5/UM_GPIO52 CI_DAT6/UM_GPIO53 CI_DAT7/UM_GPIO54 CI_ADDR0/UM_GPIO55 CI_ADDR1/UM_GPIO56 CI_ADDR2/UM_GPIO57 CI_ADDR3/UM_GPIO58 CI_ADDR4/UM_GPIO59 CI_ADDR5/UM_GPIO60 CI_ADDR6/UM_GPIO61 CI_ADDR7/UM_GPIO62 CI_ADDR8/UM_GPIO63 CI_ADDR9 CI_ADDR10 CI_ADDR11 CI_ADDR12 CI_ADDR13

CI_WEN CI_OEN CI_WAITN CI_RESET CI_IRQN CI_CE1N CI_IORDN CI_IOWRN CI_CD2N CI_CD1N NC NC NC NC AB3

AC3 AB4 T5 T4 T6 V4 U6 AC2 AA4 AB2 AA3 AA2 AA1 Y1 Y2 Y4 W3 W4 V5 V3 Y6 Y5 V6 AB1 Y3 U3 U5 W5 W6 AC4 U4

OVDD3P3 OVDD3P3 OVDD3P3 OVDD3P3 OVDD3P3 OVDD3P3 OVDD3P3

OVDD1P5 OVDD1P5 OVDD1P5 OVDD1P5 OVDD1P5 OVDD1P5 OVDD1P5 OVDD1P5 OVDD1P5 OVDD1P5 OVDD1P5

F15 H7 P10 P9 R11 R13 R14

T16 T17 U15 U16 T19 T20 U17 U19 U20 T18 U18

L10 L11 L12 L13 L14 L15 L9 M10 M11 M12 M13 M14 M15 N3 T3 V14 V19 V22 W17

AA14 AA18 AA20 AB10 AB13 AB16 AB18 AB22 AC12 AC17 AC19 B22 F11 F12 F13 G11 G12 G13 G14 G15 H11 H12 H13 H14 H15 J10 J11 J12 J13 J14 J15 J9 K10 K11 K12 K13 K14 K15 K3

GND OVDD3P3_AUX OVDD3P3_AUX OVDD3P3_AUX IVDD1P0

IVDD1P0 IVDD1P0 IVDD1P0 IVDD1P0 IVDD1P0 IVDD1P0 IVDD1P0 IVDD1P0 IVDD1P0 IVDD1P0 IVDD1P0 IVDD1P0 IVDD1P0

K18 K8 L8 M18 N10 N11 N12 N13 N14 N15 N16 N8 N9 1

V_3.3V_AUX V_3.3V C88

GND AVDD3P3_HDMI V_IVDD V_3.3V GND AVDD1P0_HDMI C101

Ўњᬍ୘PC῵ᓣϟ᳝䕏ᖂᑆᡄ ᵓᑩ㚠⛞C101

AVDD1P0_HDMI AVDD1P0_PLL

close to SiS V_IVDD V_IVDD C100 1uF_0402

AVSS1P0_LPLL AVSS1P0_CPLL AVDD3P3_DM AVDD3P3_AUHP AVDD3P3_AUHP AVDD3P3_AU AVDD3P3_USB AVDD3P3_USB AVDD3P3_HSADCAFE AVDD3P3_HSADCAFE AVDD3P3_ATV AVDD1P0_LPLL AVDD1P0_CPLL AVSS3P3_DM AVSS3P3_ATV AVSS3P3_HDMIC AVSS3P3_AUHP AVSS3P3_AUHP AVSS3P3_AU AVSS3P3_USB AVSS3P3_USB L17

J16 J8 G9 H10 H9 M8 M9

VGA_SDA VGA_SCL GND HS VS SDA SCL NC NC RX1 NC/ESD_3P RX2 NC/ESD_3P RX3 NC/ESD_3P

RX9 NC/ESD_3P RX10 NC/ESD_3P RX11 NC/ESD_3P RX12 NC/ESD_3P

DZ11AA1-P9_IN PC AUDIO IN

75R PC_AUDIO_L PC_AUDIO_R GNDGND

47R B0_REF SIS_VGA_SDA SIS_VGA_SCL DVD_AUDIO_R DVD_AUDIO_L

HP_DET EARPHONE-OUTR AUDIO_CTL

33K EARPHONE-OUTL RX8

75R 75R 75R R83 R84 R85

GND C246 1000pF C247 1000pF

echo gp241 > /dev/sisgpio echo gp240 > /dev/sisgpio

100uF/10V EAR_OUTL R117

100K DVD_ON/OFF GND R107

NC/ESD_3P GND GND RX29

ESD-3P GND SIS_YPP_SOG1 5

SIS_YPP_G1 5 YPP-G/AV SIS_YPP_B1 5 SIS_YPP_R1 5

HDMI_CEC_R HDMIB_HPD_R SIS_HDMIB_SDA SIS_HDMIB_SCL

4 SIS_HDMIB_SDA R138

HDMI_ARC SIS_HDMIA_HPD HDMIB_5VDET V_HDMIA

HDMIA_5VDET DDC/CEC_GND HGND1

RSVD CEC HPD DDC/CEC_GND HGND1

100ohm differential impedance for TMDS traces.

General Vcc decoupling

47nF Each of these Vcc pins of TDA18273 is decoupled by a single capacitor (pin 1, 16, 27, 35)

0~2V ->0~ 0.314V (TV MODE)

V_5V RX37 ESD-3P AV1-V CVBSO_FIL

20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 GND

SCART_AUDIO_L SCART_AUDIO_R YPP_SOG1 5

YPP_G1 5 YPP_B1 5 YPP_R1 5 SCART_Y 5

47R MCLKO MOVAL MOSTRT

65 66 37 38 39 40 41

MCLKI MIVAL MISTRT MOD0

MOD1 MOD2 MOD3 MOD4 MOD5 MOD6 MOD7

48 49 50 53 54 55 56

MOI1 MOI2 MOI3 MOI4 MOI5 MOI6 MOI7

MCLKO MOVAL MOSTRT MDO0

MDO1 MDO2 MDO3 MDO4 MDO5 MDO6 MDO7

MCLKI MIVAL MISTRT A0

A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14

MOVAL MOSTRT MCLKO MOD0

MOD1 MOD2 MOD3 MOD4 MOD5 MOD6 MOD7

CI_D1 CI_D2 CI_D3 CI_D4 CI_D5 CI_D6 CI_D7

CI_ADD1 CI_ADD2 CI_ADD3 CI_ADD4 CI_ADD5 CI_ADD6 CI_ADD7 CI_ADD8 CI_ADD9 CI_ADD10 CI_ADD11 CI_ADD12 CI_ADD13 CI_ADD14_PCMCIA 30 31 32 2 3 4 5 6

CI_IRQ_N CI_INPACK_N CI_WAIT_R_N C255

28 27 26 25 24 23 22 12 11 8 10 21 13 14

CI_RESET CI_OE_N CI_WE_N CI_REG_N R176

CI_ADD12 R216 CI_ADD13 R222 CI_ADD14_PCMCIA R175

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

CI_CE1_N CI_IORD_N CI_IOWR_N CI_CD2_N TS_CLK CI_D0

CI_D1 CI_D2 CI_D3 CI_D4 CI_D5 CI_D6 CI_D7 CI_ADD0 CI_ADD1 CI_ADD2 CI_ADD3 CI_ADD4 CI_ADD5 CI_ADD6 CI_ADD7 CI_ADD8 CI_ADD9 CI_ADD10 CI_ADD11 CI_ADD12 CI_ADD13

NC/12pF CI_WAIT_N MIVAL MISTRT MOI0

MOI1 MOI2 MOI3 MOI4 MOI5 MOI6 MOI7

CI_CD1_N CI_WE_N CI_OE_N CI_WAIT_N CI_RESET CI_IRQ_N CI_INPACK_N CI_WAIT_R_N

10K 10R-0402R202 10R-0402R202

SD PBTL NC RINP RINN S4

NC/0R-0805 R214 NC/0R-0805

2 3 4 5 6 7 8 9 10 EC9 1

4.7uF/16V/X5R SPK-OUTR CN6

2 NC/470uF/16V LOUT+

+ U12 220uF/16V NC/TPA1517

19 18 17 16 15 14 13 12 11

VCC_AMP V_3.3V SPK-OUTL C201 1uF-0603

echo gp060 > /dev/sisgpio echo gp061 > /dev/sisgpio

R201---6.8K R212---4.7K