SL71_SL10 PARQUET SPACE EXPLORER - Aspirateur HOOVER - Free user manual and instructions

USER MANUAL SL71_SL10 PARQUET SPACE EXPLORER HOOVER

Z* **Nozzle design may vary according to models

**Nozzle design may vary according to models

**Nozzle design may vary according to models

GB Do not spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours.

INSTRUCTIONS FOR SAFE USE This appliance should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is fully understood before operating the appliance.

Do not run over the power cord when using your appliance or remove the plug by pulling on the power cord.

Do not continue to use your appliance if it appears faulty.

Do not leave the appliance plugged in. Always switch off and remove the plug from the socket after use, or before cleaning the appliance or any maintenance task.

HOOVER service: To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised HOOVER service engineer.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children without supervision.

Do not stand on or wrap the cord around arms or legs when using your appliance.

Do not use the appliance to clean animals or people. Do not position the appliance above you when cleaning the stairs.

If the power cord is damaged stop using the appliance immediately. To avoid a safety hazard, an authorised

HOOVER service engineer must replace the power cord.

The symbol on this appliance indicates that this appliance may not be treated as household waste. Instead it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this appliance, please contact your local city office, your household and waste disposal service or the shop where you purchased the appliance.

Keep hands, feet, loose clothing and hair away from rotating brushes.

Use only attachments, consumables or spares recommended or supplied by HOOVER. Static electricity: some carpets can cause a small build up of static electricity. Any static discharge is not hazardous to health.

This appliance complies with the European Directives 2006/95/EC, 2004/108/EC and 2011/65/EU.

HOOVER Limited, Pentrebach, Merthyr Tydfil, Mid Glamorgan, CF48 4TU, UK Do not use your appliance out of doors or on any wet surface or for wet pick up.

Do not pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items.

Getting to know your cleaner

A. B. C* C** D. E. F. G. H. I. J. K. L. M. N.

Hose Hose handle looped* (For Acubed Silent Extra model 62 dba) Hose handle curved**(For Acubed Silent model 69 dba) Suction Regulator* Telescopic Tube Button** Carry Handle Bag Check Indicator LED On/Off Pedal Cord Reel Pedal LED Display Screen* Variable Power Control Button* K1. Variable Power Control Slider* Tool Bracket* Floor type selector* Carpet and Floor Nozzle (GP)** N1. Carpet Nozzle (CA)** N2. Hard Floor Nozzle (HF)** Exhausted sponge Exhausted Filter Bag Door Release Latch Bag Door Pre-motor Filter Bag holder** Bag** Accessory Set* V1. Crevice Tool* V2. Furniture Nozzle* V3. Dusting Brush* Pet Hair Remover Mini Turbo Nozzle* Allergy Remover Mini Turbo Nozzle* Parquet Nozzle* Easy Parquet Nozzle

To obtain the best performance and energy efficiency it is recommended that the correct nozzles are used for the main cleaning operations. These nozzles are indicated in the diagrams by the letters GP, HF or CA.

A nozzle type GP can be used to clean both carpet and hard floor. A nozzle type HF is suitable for use only on hard floor. A nozzle type CA is suitable for use only on carpet. The other nozzles are accessories for specialist cleaning tasks and are recommended for occasional use only. It is important to note that this vacuum cleaner is supplied with an Energy Label as required by European Regulation (EU) 665/2013. If the label shows a red prohibition circle on the left covering the carpet symbol, then this indicates that the vacuum cleaner is not suitable use on carpets.

Remove all components from the packaging.

If the label shows a red prohibition circle on the right covering the hard floor symbol, then this indicates that the vacuum cleaner is not suitable for use on hard floors.

Connect the hose to the cleaner main body, ensuring it locks into position. [1]

To release the hose: rotate the connector counterclockwise and pull it. [2]

*Certain Models Only ** Certain models only, nozzles may vary according to model

Extract power cord and plug it into the power supply. Do not pull the cord beyond the red marker. [5]

Adjust the telescopic tube to the desired height by moving the telescopic tube adjuster and raise or lower the tube to the most comfortable cleaning position. [4] Select Carpet or Floor Nozzle for ideal cleaning mode for the floor type. Hard Floor – Brushes are lowered to protect the floor. Carpet – Brushes are raised for the deepest clean. Switch the cleaner on by pressing the on/off Pedal on the cleaner main body. [6] Adjust the power level by pressing the variable power control button** or by pushing the variable power control slider**. [7,8] Adjust the suction regulator* to the desired level. [9] Switch off at the end of use by pressing the on/off Pedal. Unplug and extract power cord again to wind the power cord back into the cleaner. Parking and Storage - The tube can be parked for temporary storage while in use, or in the storage position when not in use. [10]

Assembling your Cleaner

Connect the hose handle to the end of the fixed tube upper end and store the accessories on the tube. [3B]

Connect the tube lower end to carpet and floor nozzle. [3A]

NOTE: Dust pick up ability carpet, dust pick up ability hard floor, and energy efficiency in accord with Commission Regulations (EU) 665/2013 and (EU) 666/2013.

GB Cleaning the pre-motor filter:

1. Lift the bag door release latch to open the bag door and remove the bag holder. [12] 2. Remove the pre-motor filter frame from the cleaner. [15] 3. Remove the filter sponge from the holder. [16] 4. Wash it in hand warm water, and allow it to dry thoroughly before replacing to the cleaner. [19,20]

All accessories can be fitted to the end of the handle or the end of the telescopic tube.

Accessory Set* – Combines several functions in one, with maximum flexibility by the rotating body. Reach into awkward areas by rotating the body. The 3 in 1 tool can be stored neatly underneath the hose handle. Crevice Tool* – For corners and hard to reach areas. [V1] Furniture Nozzle* – For soft furniture and fabrics. [V2] Dusting Brush* – For bookshelves, frames, keyboards and other delicate areas. To extend the brushes push the button on the body of the tool. [V3]

Cleaning the exhausted filter and exhausted sponge:

1. To remove the exhaust sponge and the exhaust filter, remove the exhaust sponge 1 from the exhaust cover and unclip the filter pack and remove the other sponge 2. [17,18,19] 2. Wash them in hand warm water, and allow them to dry thoroughly before replacing. [20,21] Remember: Do not use hot water or detergents. In the unlikely event of the filters becoming damaged, fit a Genuine Hoover replacement. Do not try and use the product without a dust bag or filter fitted.

Parquet Nozzle* – For parquet floors and other delicate floors. [Y]

Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet hairs removal. [W] Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard to clean areas, particularly suitable for allergen removal. [X]

Cleaning the permanent cloth dust bag*

To maintain optimum performance we recommended that you wash the permanent cloth dust bag under warm water after every 5 full bags. Remove excess water and leave to dry fully before replacing.

IMPORTANT: Do not use mini turbo nozzles on rugs with long fringes, animal hides and carpet pile deeper than 15mm. Do not keep the nozzle stationary while brush is rotating.

Removing a blockage from the system (*Certain model only)

If the bag check indicator LED is illuminated or flashing: 1. Check if the bag is full. If so refer to ‘Replacing The Dust Bag’. 2. If it is not full, then; A. Do the filters need cleaning? If so refer to ‘Cleaning the Filter’. B. Check if there is any other blockage in the system - Use a cord or a pole to remove any blockage from the telescopic tube or flexible hose. Warning - The bag check indicator LED will turn on if the cleaner is used when full, if there is a blockage or if the filters are dirty. If the cleaner is used for a significant period of time with the bag check indicator LED is on, a thermal cut out will switch the cleaner off to prevent overheating. The bag check indicator LED turns off once the cleaner has switched off to signal that the thermal cut out has been activated. If this should happen, switch the cleaner off, unplug and correct the fault. It will take about 30 minutes for the cut out to automatically reset.

Replacing the Dust Bag

If the bag check indicator is red please check and, if necessary, replace the bag. 1. Lift the bag door release latch to open the bag door, pull the bag holder and pull the pull the bag collar to remove the bag. [11,12] 2. Apply the peel and seal sticker, located on the bag collar, to the bag inlet. The full dust bag should be disposed of correctly and carefully. [13,14] 3. Fold a new bag as shown on the bag and fit by inserting the collar into the bag holder. 4. Refit the bag holder and close the bag door. WARNING: The bag door will NOT close if the dust bag and/or the bag holder are not assembled to the cleaner. Always ensure the bag and bag holder are present when closing the bag door. REMEMBER: The bag check indicator LED* may also be lit if an obstruction has occurred. In this case refer to ‘remove A Blockage From the System’.

USER CHECK LIST Should you have a problem with the product, complete this simple user checklist before calling your local Hoover service.

Cleaning the Filters*

To maintain optimum performance of your cleaner, please wash the filters after each 5 bag changes.

*Certain Models Only ** Certain models only, nozzles may vary according to model

Is there a working electricity supply to the cleaner? Please check with another electrical appliance.

Is the dust bag over-filled? Please refer to ‘Cleaner Maintenance’. Is the Filter blocked? Please refer to ‘Cleaning the filter’.

Is the hose or nozzle blocked? Please refer to ‘Removing a blockage from the system’.

Has the cleaner overheated? If so, it will take approximately 30 minutes to automatically reset.

Important Information

Hoover spares and Consumables Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or direct from Hoover. When ordering parts always quote your model number. For Acubed Silent Extra model 62 dba Pre Motor & Exhaust Filter Kit U54 35601662 Microfiber Bag (x4) H75 35601663 Complete Flexible Hose D205E 35601664 Carpet & Floor Silent Extra Nozzle G230SEE 35601665 Parquet Extra Nozzle G231EE 35601666 For Acubed Silent model 69 dba Pre Motor & Exhaust Filter Kit Paper Bag (x5) Complete Flexible Hose Carpet & Floor Silent Nozzle Parquet Extra Nozzle

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

Should you require service, spares and consumables at any time, please contact your local Hoover Service Office.

Hoover’s factories have been independently assessed for quality. Our products are made using a quality system which meets the requirements of ISO 9001.

The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee. Subject to change without notice. 4

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

35601662 H75 35601663 D205E 35601664 G230SEE 35601665 G231EE 35601666

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

H75 D205E G230SEE G231EE

35601663 35601664 35601665 35601666

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

H75 D205E G230SEE G231EE

35601663 35601664 35601665 35601666

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

D206E G232SE G231EE U54

H75 D205E G230SEE G231EE

35601663 35601664 35601665 35601666

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

H75 D205E G230SEE G231EE

35601663 35601664 35601665 35601666

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

35601662 H75 35601663 D205E 35601664 G230SEE 35601665 G231EE 35601666

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

35601662 H75 35601663 D205E 35601664 G230SEE 35601665 G231EE 35601666

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

H75 D205E G230SEE G231EE

35601663 35601664 35601665 35601666

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

H75 D205E G230SEE G231EE

35601663 35601664 35601665 35601666

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

H75 D205E G230SEE G231EE

35601663 35601664 35601665 35601666

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

NAVODILA ZA VARNO UPORABO U54

H75 D205E G230SEE G231EE

35601663 35601664 35601665 35601666

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

H76 D206E G232SE G231EE

35601668 35601669 35601670 35601666

H76 D206E G232SE G231EE