AZUR PERFORMER PLUS GC4513/30 - Iron PHILIPS - Free user manual and instructions

Find the device manual for free AZUR PERFORMER PLUS GC4513/30 PHILIPS in PDF.

📄 18 pages English EN 💬 AI Question
Notice PHILIPS AZUR PERFORMER PLUS GC4513/30 - page 4
View the manual : Français FR English EN Español ES Italiano IT
Manual assistant
Powered by ChatGPT
Waiting for your message
Product information

Brand : PHILIPS

Model : AZUR PERFORMER PLUS GC4513/30

Category : Iron

Download the instructions for your Iron in PDF format for free! Find your manual AZUR PERFORMER PLUS GC4513/30 - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AZUR PERFORMER PLUS GC4513/30 by PHILIPS.

USER MANUAL AZUR PERFORMER PLUS GC4513/30 PHILIPS

Always there to help you GC3800 series Question? Contact Philips

User manual Specifications are subject to change without notice © 2015 Koninklijke Philips N.V. All rights reserved.

Quick Start Guide – Start here Quick Start Guide – Start here Important Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Read the separate important information leaflet and this user manual carefully before you use the appliance. Keep both documents for future reference. Spray button Steam slider a. Dry setting b. ECO setting c. Auto steam setting Steam boost trigger Safety auto-off light (specific types only) Temperature indicator light Temperature dial with Auto steam control Calc clean button Type of water to use Your appliance has been designed to be used with tap water. If you live in an area with hard water, fast scale build-up may occur. Therefore, it is recommended to use distilled or demineralized water to prolong the lifetime of your appliance. Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. Ironing Please read the quick start guide in this user manual carefully to start using your appliance. Temperature setting Select the temperature to the appropriate setting for your garment according to table 1 below: Table 1: Fabric type Linen Temperature setting MAX Cotton

Synthetic fabric (e.g. acrylic, nylon, polyamide, polyester)

Auto steam control Automatically adjusted to the optimal amount Steam boost Yes Yes

Automatically adjusted to no steam

Steam setting -- Auto steam: The iron automatically adjusts the steam output according to the selected temperature to provide the best ironing result. ENGLISH

-- ECO: This steam setting enables you to reduce the steam output to save energy and still have sufficient steam to iron your garments. -- Dry: This steam setting enables you to iron without steam or to stop steam when the iron is not in use. -- Iron with extra steam: Press and hold the steam boost trigger to get more steam to remove stubborn creases. Steam boost function and vertical steaming -- Press and release the steam boost trigger for a powerful boost steam. This can be used to remove targeted stubborn creases or creases from a hanged garment. Note: The steam boost function should only be used at temperature setting between ●●● to MAX. Leaking may appear if you use steam boost at too low a temperature. Hot steam comes out of the iron. Do not remove wrinkles from a garment while some one is wearing it. To prevent burns, do not direct the steam at people. Safety auto-off (specific types only) The safety auto-off function automatically switches off the iron if it has not been used for 30 seconds resting on its soleplate or 8 minutes resting on its backplate. The auto-off light will light up. -- To let the iron heat up again, pick up the iron or move it slightly. The auto-off light goes out. Cleaning and maintenance For figures, refer to the fold-out at the back of the user manual. Cleaning 1 Unplug the iron and let it cool down. 2 Pour any remaining water out of the water tank from the water filling door. 3 W ipe flakes and any other deposit off the soleplate with a damp cloth and a non-abrasive (liquid) cleaning agent. To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad, vinegar or other chemicals to clean the soleplate. Calc-clean function IMPORTANT: Use Calc-clean function every 1 month to prolong the life of your iron. If water in your area is very hard, or you see scales coming out from the soleplate during ironing, use this function more frequently. 1 Make sure the iron is unplugged and the steam slider is set to dry setting. 2 Fill the water tank to the MAX indication. Do not pour vinegar or other descaling agents into the water tank. 3 Plug in the iron and set the temperature dial to MAX. 4 Unplug the iron when the temperature light goes out. 5 H old the iron over the sink. Keep pushing the calc clean button and gently shake the iron forth and back until all water in the water tank has been used up (Fig. 21).

ENGLISH Scales is flushed out, steam and boiling water also come out of the soleplate. Note: Repeat steps 2 to 5 if the water that comes out of the iron still contains scale particles. 6 Plug in the iron and let the iron heat up to dry the soleplate. 7 Unplug the iron when the temperature indicator light goes out. 8 Move the iron gently over a piece of cloth to remove any water stains on the soleplate. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, visit www.philips.com/support for a list of frequently asked questions or contact the Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details). Problem Possible cause Solution Water leaks from the water filling door. You have overfilled the water tank. Do not fill the water tank beyond the MAX indication. Pour excess water out of the water tank. Water drips from the soleplate after the iron has been unplugged or has been stored. The steam slider is set to MAX or ECO. Set the steam slider to dry setting. You have put the iron in horizontal position with water still left in the water tank. Empty the water tank. The steam boost function does not work properly (water leaks out of the soleplate). You have used the steam Wait for a few seconds before you use the steam boost function too often boost function again. within a very short period. You have used the steam boost function at too low a temperature. Flakes and impurities come out of the soleplate during ironing. Set an ironing temperature at which the steam boost function can be used (●●● to MAX). Calc are formed inside the Use the Calc-Clean function (see chapter ‘Cleaning soleplate. and maintenance’, section ‘Calc-Clean function’). FRANÇAIS