MS410DN - Monochrome laser printer LEXMARK - Free user manual and instructions

Product type	Monochrome laser printer
Brand	Lexmark
Model	MS410DN
Dimensions (W x D x H)	416 x 400 x 300 mm (estimated)
Weight	15 kg (estimated)
Power supply	220-240 V AC, 50/60 Hz
Power consumption (printing)	600 W (estimated)
Power consumption (standby)	10 W (estimated)
Power consumption (sleep)	1 W (estimated)
Main functions	Automatic duplex printing, 250-sheet tray, 50-sheet multipurpose feeder, Ethernet network, mobile printing
Supported paper sizes	A4, A5, A6, Letter, Legal, Executive, Envelopes, etc.
Supported paper weight	60 to 163 g/m² depending on source
Maintenance and cleaning	Clean the exterior with a soft cloth; replace the toner cartridge and imaging unit as prompted
Safety	Physical lock, emergency stop via switch, mandatory grounding
Spare parts	Toner cartridge, imaging unit, optional trays
Repairability	Simple user interventions (consumable replacement, jam clearing); complex repairs by authorized technician
General information	Manual available in PDF, limited warranty, online support

Frequently Asked Questions - MS410DN LEXMARK

How to load paper in the standard tray?

Pull the tray completely out, pinch the width and length guides to adjust them to the paper size, fan the stack, load the paper with the printable side down, then insert the tray. Ensure the paper type and size match the printer settings via the Paper menu.

How to clear a paper jam behind the front door?

Open the front door. If the paper is visible, remove it gently by pulling in the direction of output. Also check the fuser area (caution: hot surface). Close the front door. If the message persists, follow the on-screen instructions.

What does the flashing yellow 'Ready' light on the control panel mean?

The yellow 'Ready' light can indicate an error such as a jam, low toner, or an open door. Refer to the indicator sequence table in the manual to identify the exact issue.

How to replace the toner cartridge?

Open the front door, remove the old cartridge, take the new one out of its packaging, shake it gently to distribute the toner, insert it until it clicks, then close the door. If a replacement message appears, follow the instructions.

How to connect the printer to an Ethernet network?

Make sure you have an Ethernet cable. Plug it into the printer's Ethernet port and into your router. The printer will usually obtain an IP address via DHCP. Print the network setup page to verify the connection. Install the driver on your computer.

How to set up automatic duplex printing?

In the print driver, select the duplex option. Make sure the paper supports duplexing (weight 60-90 g/m²). The standard tray and multipurpose feeder support duplexing depending on the size.

How to clean the exterior of the printer?

Turn off the printer and unplug the power cable. Use a slightly damp soft cloth to wipe the external surfaces. Do not spray liquid directly. Dry thoroughly before reconnecting.

How to save energy with this printer?

Use Standby and Sleep modes. You can adjust the delays in the Settings menu or via the Embedded Web Server. Sleep mode reduces consumption to less than 1W. Also enable duplex printing to save paper.

How to check the remaining toner level?

Print the menu settings page (hold the Start button for 4 seconds) to see the supplies status. You can also access the Embedded Web Server by typing the printer's IP address in a browser.

What to do if the printer does not print from a mobile device?

Make sure the printer and the mobile device are connected to the same network. Use a mobile printing app like Lexmark Mobile Print. Check that mobile printing is enabled in the printer's network settings.

USER MANUAL MS410DN LEXMARK

Type(s) de machine(s):

4514

Modèle(s):

220, 230

Contenu

Listedes applications > Executer tapez D:\setup.exe>OK.

DANGER - Invisible laser radiation when cartridges are removed and interlock defeated. Avoid exposure to laser beam.

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Caising Equipment Standard ICES-003.

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb.

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Industry Canada (Canada)

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country-specific warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as "Remarketer."

Garantie limitée

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed. Fuser Units, Transfer/Transport Units, Paper Feed items, if any, and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a "Life Warning" or "Scheduled Maintenance" message for such item.

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments
—Accidents, misuse, abuse or use inconsistent with Lexmark user's guides, manuals, instructions or guidance
—Unsuitable physical or operating environment
—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer
Operation of a product beyond the limit of its duty cycle
—Use of printing media outside of Lexmark specifications
—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts
—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH

RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIMIT THE IMPLIED WARRANTYES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTYES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTYES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Patent acknowledgment

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Cercicom Corp. at the IETF for TLS Elliptic Curve Cipher Suites with SHA-256/382 and AES Galois Counter Mode (GCM) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service.

The use of certain patents in this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for AES-CCM ECC Cipher Suites for TLS implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Algorithms for Internet Key Exchange version 1 (IKEv1) implemented in the product or service.

Index

[

[38] Mémoire saturee 144

documents, impression

sous Macintosh 51

sous Windows 51

fournitures, commande

publications emplacement 7

Q