On the Candy CBWD 8514D-S washing machine, the water collector is an important component to locate for regular emptying or cleaning. Here’s how to find it:
Location of the water collector
- Location: The water collector is located at the front of the appliance, usually at the bottom, near the door.
- Access: It appears as a small drawer or tank that you can pull towards you.
How to remove and empty the water collector
- Ensure that the machine is turned off and unplugged for safety reasons.
- Open the washing machine door.
- Locate the small drawer or tank at the bottom front of the appliance.
- Gently pull the collector towards you. Be careful as it may contain residual water.
- Empty the water into a container or sink.
- Clean the collector if necessary to avoid blockages.
- Replace it by pushing it back until it is securely in place.
This operation helps prevent bad odors and ensures the washing machine operates properly.