COLOREDGE CG276W-BK - Professional Monitor EIZO - Free user manual and instructions

Product Type	Professional LCD Monitor
Screen Size	24.1 inches (61 cm)
Native Resolution	1920 x 1200 pixels
Aspect Ratio	16:10
Panel Technology	LCD TFT with anti-glare coating (hardness 3H)
Viewing Angle	Horizontal 178°, Vertical 178° (CR ≥ 10)
Pixel Pitch	0.270 mm
Displayable Colors	1.073 billion colors (10-bit via DisplayPort)
Recommended Brightness	120 cd/m² (between 5,000 K and 6,500 K)
Response Time	Approx. 13 ms
Input Connectors	2 x DVI-I (HDCP), 1 x DisplayPort (HDCP)
USB Hub	1 upstream port, 2 downstream ports (USB 2.0)
Main Functions	Color Mode (Custom, sRGB, EBU, Rec.709, SMPTE-C, DCI, CAL), Auto EcoView, ColorNavigator, Overdrive
Power	100-120 / 200-240 VAC ±10%, 50/60 Hz
Power Consumption	95 W max (with USB), 0.9 W standby, 0 W power off switch
Weight	10.7 kg (with stand), 7.1 kg (without stand)
Dimensions (with stand)	566 x 456-538 x 230 mm
Ergonomic Adjustments	Up 40° tilt, ±35° swivel, 82 mm height, 90° right rotation
Security	Kensington lock, key lock
Cleaning	Soft cloth (cotton or glasses pouch), supplied ScreenCleaner for stubborn stains

Frequently Asked Questions - COLOREDGE CG276W-BK EIZO

How to calibrate the EIZO ColorEdge CG276W monitor?

Use the supplied ColorNavigator software on the CD-ROM. Connect the monitor to the computer via the supplied USB cable, then follow the software instructions to generate an ICC profile.

What to do if the screen flickers or is blurry?

For analog input, adjust Phase and Clock in the Adjustment menu. For digital input, ensure the resolution and frequency are correct. If the problem persists, use the Phase function to eliminate flicker.

How to clean the LCD screen without damaging it?

Use a soft cotton cloth or a cleaning pouch for glasses. For stubborn stains, slightly dampen the cloth or use the supplied ScreenCleaner. Never use solvents like alcohol or acetone.

Can I use the monitor in portrait orientation?

Yes, the monitor allows 90° right rotation. Make sure your graphics card supports portrait mode. Set the menu orientation in OSD Configuration > Orientation to Portrait.

How to save energy with this monitor?

Enable Auto EcoView (ambient brightness detection) or Standby mode in PowerManager. The main power switch cuts all consumption (0 W). Turn off the monitor when not in use.

How to change the color mode?

Press the M button to display the Mode menu. Use the ▲▼ buttons to select the desired mode (Custom, sRGB, EBU, etc.). Confirm by pressing OK.

What does the orange power indicator mean?

The orange indicator means the monitor is in power saving mode (standby). It turns blue when active. If the indicator is off, check the main power switch.

How to reset all monitor settings?

Go to the Tools > All Reset menu and select Execute. This restores all settings to factory defaults. Note: This action is irreversible.

The monitor displays no signal, what to do?

Check that the signal cable is properly connected and the computer is on. Press the S button to switch between inputs (DVI-1, DVI-2, DisplayPort). If the 'No Signal' message persists, check the resolution and frequency in your graphics card settings.

How to use the monitor's USB hub?

Connect the supplied USB cable between the monitor's upstream USB port and a USB port on the computer. USB devices can then be plugged into the two downstream ports. Ensure the main power switch is on.

USER MANUAL COLOREDGE CG276W-BK EIZO

Setting Resolution 13

Windows 7. 13
Windows Vista 13
Windows XP 13
Mac OS X. 13

FCC Declaration of Conformity 49

2 Réglage/Configuration

DVI DMPM (DVI Digital Monitor Power Management)

HDCP (High-bandwidth Digital Contents Protection)

TMDS (Transition Minimized Differential Signaling)

The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impact on our natural environment.

Some of the features of the TCO'03 Display requirements:

Ergonomics

• Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability.

Energy

• Energy-saving mode after a certain time - beneficial both for the user and environment
• Electrical safety

Emissions

• Electromagnetic fields
• Noise emissions

Ecology

• The products must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14000

• Restrictions on

• chlorinated and brominated flame retardants and polymers

• heavy metals such as cadmium, mercury and lead.

The requirements include in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays in 1992 and is now requested by users and IT-manufacturers all over the world.

For more information, please visit www.tcodevelopment.com

For U.S.A., Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party	EIZO NANAO TECHNOLOGIES INC.
	5710 Warland Drive, Cypress, CA 90630
	Phone: [phone]
declare that the product	Trade name: EIZO
	Model: ColorEdge CG223W / CG243W
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device.
- AC Cord
- Shielded Signal Cable (Enclosed)
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appeil numérique de le classe B est conforme à la norme NMB-003 du Canada.