COLOREDGE CG246W-BK - Professional Monitor EIZO - Free user manual and instructions

EIZO ColorEdge CG246W-BK - Professional Monitor
Product Type	Professional color LCD monitor
Screen Size	24.1 inches (61 cm)
Native Resolution	1920 x 1200 (WUXGA)
Displayable Colors	Approx. 1.07 billion (10-bit via DisplayPort)
Viewing Angle	Horizontal 178°, vertical 178° (CR≥10)
Response Time	Approx. 13 ms
Recommended Brightness	120 cd/m²
Input Connectors	2x DVI-I (HDCP), 1x DisplayPort (v1.1a, HDCP)
Main Functions	ColorNavigator calibration, Auto EcoView, color modes (sRGB, EBU, Rec.709, SMPTE-C, DCI), Portrait/Landscape mode, USB 2.0 hub (1 upstream, 2 downstream)
Dimensions (with stand)	566 x 456-538 x 230 mm (W x H x D)
Dimensions (without stand)	566 x 367 x 85 mm
Weight (with stand)	Approx. 10.7 kg
Weight (without stand)	Approx. 7.1 kg
Power Supply	100-120 / 200-240 VAC ±10%, 50/60 Hz, 1.0A / 0.5A
Power Consumption (on)	≤ 95 W (with USB load) / ≤ 85 W (without USB load)
Power Consumption (eco mode)	≤ 0.9 W
Power Consumption (off)	0 W (main switch off)
Care and Cleaning	Clean the LCD panel with a soft cloth (cotton type). For stubborn stains, lightly moisten with ScreenCleaner. Do not use solvents, alcohol, or abrasive products.
Safety	Main power switch, key lock, Kensington MicroSaver slot
Spare Parts and Repairability	The backlight has a limited lifespan. In case of problems, contact your dealer. The manual recommends calling a qualified technician.
General Information	Brand: EIZO, model: ColorEdge CG246W-BK, warranty according to region. Manufactured under strict quality control (effective pixel rate ≥ 99.9994%).

Frequently Asked Questions - COLOREDGE CG246W-BK EIZO

How to calibrate the ColorEdge CG246W monitor?

Use the ColorNavigator software provided on the CD-ROM. Connect the monitor to the computer via the included USB cable, install the software, and follow the instructions. Calibration allows generating ICC or ColorSync profiles for accurate color reproduction.

How to activate the Auto EcoView function?

In the setting menu, go to PowerManager then Auto EcoView. Select On to enable automatic ambient light detection. The sensor on the front then adjusts the screen brightness for optimal visual comfort and energy savings.

What is the correct way to clean the LCD screen?

Use a soft cloth (cotton or eyeglass pouch). For stains, lightly moisten the cloth with the included ScreenCleaner or water. Do not press hard and avoid any solvent, alcohol, or abrasive product. Periodic cleaning extends the panel's lifespan.

What to do in case of a dead pixel or bright dot?

Missing or lit pixels are a characteristic of the LCD panel and not a defect. The effective pixel rate is at least 99.9994%. If the problem bothers you, display a white or black screen for a few minutes; this can sometimes resolve pressure marks.

How to switch between different input sources?

Press the S button (input selection) on the front of the monitor. The active port name is displayed at the top right. You can also configure automatic selection in the Settings > Tools > Input Selection menu (choose Auto or Manual).

How to adjust the color temperature?

Access the Color > Temperature menu. You can choose from preset values (5000K, 6500K, 9300K, etc.) or Native. For fine adjustment, use the Gain option (red/green/blue). sRGB, EBU, etc. modes have their own default temperature.

What power saving modes are available?

The monitor supports VESA DPMS (analog signal), DVI DMPM (digital), and DisplayPort v1.1a. Activate the Sleep function in the PowerManager menu. In eco mode, the LED turns orange and consumption drops below 1 W. The main switch allows a complete shutdown to 0 W.

Can I use the monitor in portrait orientation?

Yes, the monitor can be rotated 90° to the right. To do this, set the menu orientation in OSD Settings > Orientation to Portrait. Ensure your graphics card supports this orientation and adjust the settings in the operating system.

How to reset all factory settings?

Go to the Settings > Tools > Reset All menu. Select Execute. Caution: this operation is irreversible and restores all settings (color, display, power saving) to factory defaults.

What to do if the screen stays black and the power LED does not light up?

First check that the power cord is properly plugged in and that the main power switch on the back is turned on. Press the front M/A button. If the LED is orange, the monitor is in power saving mode; press a key on the keyboard or move the mouse. If the problem persists, contact your dealer.

USER MANUAL COLOREDGE CG246W-BK EIZO

Setting Resolution 13

Windows 7. 13
Windows Vista 13
Windows XP 13
Mac OS X. 13

FCC Declaration of Conformity 49

2 Réglage/Configuration

DVI DMPM (DVI Digital Monitor Power Management)

HDCP (High-bandwidth Digital Contents Protection)

TMDS (Transition Minimized Differential Signaling)

The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impact on our natural environment.

Some of the features of the TCO'03 Display requirements:

Ergonomics

• Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability.

Energy

• Energy-saving mode after a certain time - beneficial both for the user and environment
• Electrical safety

Emissions

• Electromagnetic fields
• Noise emissions

Ecology

• The products must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14000

• Restrictions on

• chlorinated and brominated flame retardants and polymers

• heavy metals such as cadmium, mercury and lead.

The requirements include in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays in 1992 and is now requested by users and IT-manufacturers all over the world.

For more information, please visit www.tcodevelopment.com

For U.S.A., Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party	EIZO NANAO TECHNOLOGIES INC.
	5710 Warland Drive, Cypress, CA 90630
	Phone: [phone]
declare that the product	Trade name: EIZO
	Model: ColorEdge CG223W / CG243W
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device.
- AC Cord
- Shielded Signal Cable (Enclosed)
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appeil numérique de le classe B est conforme à la norme NMB-003 du Canada.