Golden Pearl Pedal - Guitar effect pedal Friedman - Free user manual and instructions

Product type	Guitar effects pedal (overdrive)
Brand	Friedman
Model	Golden Pearl
Main function	Transparent low-gain overdrive to push an amp already cranked
Controls	Volume, Gain, Tone
High-frequency cut switch	3 positions
Clipping voice selector	Tri-mode: LED, diode, no clipping
Bypass	True bypass
Power supply	9-18 VDC (no battery)
Approximate dimensions	12 x 7 x 5 cm
Approximate weight	400 g
Manufacturing	Assembled in the USA
Warranty	3 years
Maintenance and cleaning	Wipe with a dry cloth, avoid solvents
Safety	Use only a suitable 9 to 18 VDC power supply
Spare parts and repairability	Standard potentiometers and switches, repairable by a qualified technician
General information	Designed for sound connoisseurs, ideal on clean or saturated amp

Frequently Asked Questions - Golden Pearl Pedal Friedman

How to power the Golden Pearl?

The pedal works with an external power supply of 9 to 18 VDC. It is recommended to use a quality power supply to avoid noise.

Can I use a battery?

No, the Golden Pearl does not have a battery compartment. It must be powered by a wall outlet or an adapter.

What is the high-frequency cut switch?

It's a 3-position switch that adjusts the pedal's brightness. It allows you to cut more or less high frequencies to adapt the sound to your amp.

What clipping modes are available?

The tri-mode selector offers three options: LED (more headroom), diode (symmetric clipping), or no clipping (transparent). Each mode modifies the dynamic response.

Is the pedal true bypass?

Yes, the Golden Pearl uses true bypass which preserves your original signal when the pedal is disabled.

How to clean the pedal?

Use a soft, dry cloth to wipe the surface. Avoid chemical or abrasive products that could damage the finish.

What warranty is offered?

Friedman offers a 3-year warranty to the original owner against defects in materials and workmanship, with dated proof of purchase.

Does the pedal work on a clean amp?

Yes, it is very effective on a clean amp to achieve a semi-broken up or slightly saturated sound, while remaining transparent.

What settings for a semi-crunchy sound?

Set the gain to about halfway, the volume according to your level, and the tone to your liking. Use LED or diode mode for more character.

Where is the pedal made?

The Golden Pearl is assembled in the United States, with high-quality components for professional durability.

USER MANUAL Golden Pearl Pedal Friedman

FRIEDMAN

GOLDEN PEARL

Thank you for choosing the Friedman GOLDEN PEARL PEDAL.

The Friedman Golden Pearl is a transparent, lower gain overdrive pedal designed to push already overdriven amps into seductive saturation. This versatile pedal can also be used into a clean amp to achieve that elusive semi-broken up tone. Designed to please the ultimate tone connoisseur, the responsive controls along with the three position high-frequency cut switch, let you custom tailor the pedal to your amp. Even greater refinement is available via the tri-mode clipping voice switch, which provides LED, diode, or no clipping voice options. Built in the USA, and designed to withstand decades of abuse, the Golden Pearl is a must have pedal for any guitar player.

• Transparent Lower Gain Overdrive.
  • Volume, Gain, and Tone Knobs.
• Three Position High-Frequency Cut Switch
  • Tri-mode Clipping Voice Switch
  • True Bypass Switching
• Can be powered between 9-18VDC (no battery)
• Assembled in USA

FRIEDMANAMPLIFICATION.COM

LIMITED WARRANTY

FRIEDMAN offers a three (3) year warranty to the original purchaser that this FRIEDMAN product will be free from defects in material and workmanship. A dated sales receipt will establish coverage under this warranty. Warranty does not cover service or parts to repair damage caused by accident, neglect, normal & wear, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures and service, repair or modifications which have not been authorized or approved by FRIEDMAN. If this product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replacement as provided below.

RETURN PROCEDURES

Defective products must be shipped, with a dated sales receipt, freight pre-paid and insured directly to FRIEDMAN. A Return Authorization # (RA#) must be obtained prior to shipping the product. The RA# must clearly be on the package. Include a brief description of the defect, along with your correct return address and telephone number.

If FRIEDMAN determines that the unit was defective in materials or workmanship at any time during the warranty period, FRIEDMAN has the option of repairing or replacing the product at no additional charge. Products replaced or repaired under this warranty will be returned via ground shipping only within the United States-freight prepaid.

INCIDENTAL OR CONSEQUENTIAL DAMAGE

In no event is FRIEDMAN liable for any incidental or consequential damages arising out of the use or inability to use of any FRIEDMAN product, even if FRIEDMAN or a FRIEDMAN dealer has been advised of the possibility of such damages, or any other claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

CUSTOMER SUPPORT:

Email us at [e-mail]

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FRIEDMAN