POSEIDON Reference Speaker System - Speaker Gryphon Audio - Free user manual and instructions

USER MANUAL POSEIDON Reference Speaker System Gryphon Audio

Assembly Guide for THE GRYPHON POSEIDON Reference Speaker System

Removing transport panels and mounting stands:

CAUTION! The Poseidon tower are a very heavy and should only be moved by 3-4 people to avoid damage or injury. When the speaker is upright, it can be turned and placed approximately at the intended position.

1. Carefully place the bottom end of the speaker on the support stand in order to lift the transport panel from the floor - as shown on the picture 1.

2. Remove the transport panel and mount the stands.

Please refer to the next page for an overview of the location of the bolts

Please note orientation of the Gryphon Logos on the stands as shown on picture 2 (for a woofer tower)

1. Place a piece of carpet under the bottom rear end of the tower in order not to damage the rear part of the acrylic bottom plate while raising the tower
2. unless you have a carpet on the floor already -
3. With a firm grip on the top transport panel, carefully raise the tower to an upright position.
4. The top transport panel can be removed later. Until everything else is finished, it is a good idea to have the panel to hold when moving the speaker.
5. Repeat the above for all four towers.

Assembly Guide for THE GRYPHON POSEIDON Reference Speaker System

Top view Bass Tower

Bottom view Bass Tower

Please note orientation of the logo when mounting the stands

Top view Tweeter/Mid Tower

Bottom view Tweeter/Mid Tower

Bolts in 1:1 if document is printed in A4