0-Coast - Modular audio module Make Noise - Free user manual and instructions
Find the device manual for free 0-Coast Make Noise in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Semi-modular Desktop Synthesizer |
| Brand | Make Noise |
| Model | 0-Coast |
| Category | Modular Audio Module |
| Sound Engine | Hybrid analog and digital synthesis |
| Oscillator | Smart oscillator with multiple waveform outputs |
| Envelope | Dynamic analog envelope with modulation inputs |
| Filter/LPG | Vactrol-based Lowpass Gate for organic amplitude and timbre |
| Connectivity | MIDI In, USB, and 18x 3.5mm patch points |
| Audio Output | 6.35mm line out and 6.35mm headphone out |
| Power Supply | 12V DC adapter included |
| Dimensions | 21.6 x 12.7 x 4.1 cm (8.5 x 5 x 1.6 inches) |
| Weight | 0.9 kg (2.0 lbs) |
| Sequence | Built-in step sequencer with shift modes |
| Main Features | Frequency modulation, wave shaping, dynamic modulation, MIDI to CV |
| Maintenance | Wipe with soft dry cloth; avoid liquids |
| Safety | Use only supplied power adapter; unplug before cleaning |
| Repairability | Qualified service required; no user-serviceable parts |
Frequently Asked Questions - 0-Coast Make Noise
How do I power the 0-Coast?
Connect the included 12V DC adapter to the rear panel and plug into a mains outlet. Always use the adapter with the specified polarity to avoid damage.
Can I connect the 0-Coast to a Eurorack system?
Yes. The 0-Coast uses 3.5mm patch cables for CV/gate interconnection. It can send and receive control voltages and audio, making it a perfect companion to a Eurorack modular.
How do I use the built-in sequencer?
The 0-Coast has a step sequencer controlled via the front panel. You can program steps and use the SSM (Sequence, Sample and Shift) mode to create melodic patterns. Check the manual for detailed programming.
What is the Lowpass Gate (LPG)?
The Lowpass Gate is a vactrol-based circuit that combines a lowpass filter and a VCA. It produces a natural, decaying envelope similar to West Coast synthesis. Use the DYNAMIC buss for expressive control.
How do I connect MIDI to the 0-Coast?
Connect a 5-pin DIN MIDI cable or USB-MIDI from your keyboard or DAW to the 0-Coast. The MIDI input accepts note, clock, and CC messages, which are converted to CV/Gate signals.
Does the 0-Coast require an enclosure or case?
No, the 0-Coast is a standalone desktop instrument. It has its own power supply and is ready to use on your desk, no rack needed.
What is included in the box?
The box includes the 0-Coast unit, a 12V DC power adapter, and documentation. Patch cables are not included, so purchase 3.5mm mono cables separately.
How do I clean the 0-Coast?
Disconnect power, then wipe surfaces with a soft, dry cloth. Do not use liquids or sprays, as they may damage the electrical components.
Can the 0-Coast be used as a sound source for a pair of speakers?
Yes, use the output labeled Basic or Line Out to connect to an amplifier, mixer, or active speakers. The 0-Coast outputs robust synth audio levels.
Where can I download the user manual for the 0-Coast?
The manual is available free in PDF from the Make Noise official website and on platforms like notice-facile.com. It contains detailed explanations of every section.
User questions about 0-Coast Make Noise
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Modular audio module in PDF format for free! Find your manual 0-Coast - Make Noise and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 0-Coast by Make Noise.
USER MANUAL 0-Coast Make Noise
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Make Noise
Model : 0-Coast
Category : Modular audio module