Wiard Wogglebug - Modular audio module Make Noise - Free user manual and instructions

Find the device manual for free Wiard Wogglebug Make Noise in PDF.

Make Noise Wiard Wogglebug - Modular audio module
📄 9 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Make Noise Wiard Wogglebug - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Make Noise
Model Wiard Wogglebug
Product Type Modular audio module for Eurorack synthesizers
Module Format Eurorack, 3U panel height
Width 16 HP
Depth Approximately 24 mm behind the panel
Power Supply +12V / -12V Eurorack busboard, 10-pin ribbon cable connector
Current Draw +12V: 60 mA, -12V: 40 mA (typical)
Main Functions Random voltage generation, woggle circuit, ring modulation, sample and hold, slew and clock output
Inputs Clock, external audio/CV, woggle input
Outputs Woggle, ring, smooth, stepped, clock and related random CV outputs
Controls Knobs for woggle, ring, smooth, sample and hold, slew, and clock frequency
Installation Mount in a Eurorack case using included screws; align ribbon cable red stripe with -12V
Cleaning and Maintenance Use a dry, soft cloth; do not use liquids or sprays; clean with the power off
Safety Power off before patching or unpatching; avoid electrostatic discharge; handle with care
Spare Parts and Repairability Available through Make Noise or authorised dealers; SMD components require qualified repair
Package Contents Wiard Wogglebug module, Eurorack power cable, mounting screws
Warranty Three-year limited warranty against manufacturing defects
Compliance CE, RoHS and WEEE compliant
Country of Origin United States (Asheville, NC)

Frequently Asked Questions - Wiard Wogglebug Make Noise

What is the Wiard Wogglebug?
The Wiard Wogglebug is an analog random voltage generator in Eurorack format, originally designed by Wiard and produced by Make Noise. It creates random control voltages for patching, modulation, and unpredictable rhythmic events.
How do I power the Wiard Wogglebug?
Connect the included 10-pin ribbon cable to the module and your Eurorack case's busboard. The red stripe must align with the -12V rail. It requires +12V and -12V power.
What is the Woggle output used for?
The Woggle output provides chaotic random voltages that are ideal for patch variation, odd timing, and unexpected modulation. It reacts to the clock and input signals to create complex, evolving CV patterns.
Can the Wogglebug be used as a clock source?
Yes, the module can generate a clock or trigger output whose rate is set by the frequency control. This clock can drive other modules, and the random voltages will be synchronised to this clock when patched.
What are the main inputs and outputs?
Key inputs include clock, external audio/CV, and woggle input. Main outputs are woggle, ring, smooth, stepped, and clock. Signal levels are typical Eurorack ~10 Vpp on audio/CV outputs.
How do I clean the module?
Turn off the power and use a dry, lint-free cloth to wipe the panel and knobs. Do not use chemical cleaners or sprays, and never allow moisture into the jacks or behind the panel.
What are the current requirements?
The module draws approximately 60 mA on +12V and 40 mA on -12V. Before installing in a powered case, make sure your power supply can handle the added load.
Does the Wogglebug require software or drivers?
No, it is a pure analog module and requires no software, drivers, or firmware updates. It works immediately when connected to your Eurorack power.
How do I mount the module in my Eurorack case?
First, disconnect the case power. Install the module in a free 3U slot, align the ribbon cable correctly, and secure it with the included M3 mounting screws. Reconnect power after verifying the connection.
What warranty applies to the Wiard Wogglebug?
Make Noise provides a three-year limited warranty covering manufacturing defects. Keep your receipt and register the product if required; repairs may also be available from Make Noise or authorised service centers.

User questions about Wiard Wogglebug Make Noise

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Modular audio module in PDF format for free! Find your manual Wiard Wogglebug - Make Noise and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Wiard Wogglebug by Make Noise.

USER MANUAL Wiard Wogglebug Make Noise

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Make Noise

Model : Wiard Wogglebug

Category : Modular audio module