CMS009012 - Projector Accessory Chief - Free user manual and instructions
Find the device manual for free CMS009012 Chief in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Chief |
| Model | CMS009012 |
| Product Type | Projector Mount Accessory |
| Mounting Style | Ceiling mount |
| Compatibility | Universal projector mount |
| VESA Compatibility | 75 x 75 mm to 200 x 150 mm |
| Load Capacity | 25 lb (11.3 kg) |
| Material | Cold-rolled steel |
| Finish | Black powder-coated |
| Dimensions | 8.5 x 8 x 4 in (21.6 x 20.3 x 10.2 cm) |
| Weight | 4.5 lb (2.0 kg) |
| Extension Range | 6 to 18 in (15.2 to 45.7 cm) |
| Adjustability | Roll, pitch, yaw, height |
| Primary Function | Secure projector overhead and align image |
| Cable Management | Integrated cable routing channel |
| Leveling | Built-in bubble level |
| Power Source | None (manual operation) |
| Installation | Drilling into ceiling joists required |
| Safety Features | Safety locking clip, anti-theft screws |
| Cleaning | Wipe with dry, lint-free cloth |
| Spare Parts | Replacement hardware from manufacturer |
| Repairability | Modular; components individually replaceable |
| Warranty | Limited lifetime warranty |
| User Manual | Free 4-page PDF available online |
Frequently Asked Questions - CMS009012 Chief
What is the Chief CMS009012?
The Chief CMS009012 is a projector mount accessory designed to securely attach a projector to the ceiling. It includes a sturdy mounting plate, extension column, and hardware for most standard projectors.
How do I know if this mount fits my projector?
Check your projector's VESA pattern and weight. The CMS009012 supports VESA patterns from 75x75 mm to 200x150 mm and a maximum load of 25 lb (11.3 kg).
What tools are required for installation?
Typical installation requires a Phillips screwdriver, an adjustable wrench, a drill with masonry or wood bits, and a stud finder to locate ceiling joists.
Can I adjust the projector angle after installation?
Yes, the mount provides roll, pitch, yaw, and height adjustment so you can fine-tune the projected image even after attachment.
Does the mount have a bubble level?
Yes, a built-in bubble level helps you align the projector mount horizontally during installation.
Can it be installed on a suspended ceiling?
For suspended ceilings, use an additional ceiling support kit or attach to the structural ceiling above the tiles for safety.
How do I hide the cables from the projector?
The mount includes an integrated cable management channel along the extension column; run the HDMI and power cables through this channel before tightening.
What safety features does it have?
It includes a safety locking clip and anti-theft security screws. Always verify that all bolts are tightened to the specified torque.
How should I clean the mount?
Use a dry, lint-free cloth to remove dust. Do not use solvents or abrasive cleaners, as they may damage the powder-coated finish.
Where can I get spare parts or repairs?
Contact Chief support or authorized distributors for replacement screws, bolts, and extension columns. The mount's modular design allows easy replacement of individual components.
User questions about CMS009012 Chief
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector Accessory in PDF format for free! Find your manual CMS009012 - Chief and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CMS009012 by Chief.
USER MANUAL CMS009012 Chief
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Chief
Model : CMS009012
Category : Projector Accessory