CMSFAN - Projector Accessory Chief - Free user manual and instructions

Product Type	Projector Ceiling Mount with Fan
Brand	Chief
Model	CMSFAN
Category	Projector Accessory
Compatibility	Most projectors with VESA patterns up to 400x400mm
Weight Capacity	50 lbs (22.7 kg)
Mount Plate Dimensions	18.2 x 13.5 in (462 x 343 mm)
Fan Speed	Adjustable, 3 speeds
Power Supply	110-240V AC, 50/60 Hz
Power Consumption	15W
Material	Steel, aluminum, plastic
Color	Black
Mounting Options	Ceiling, wall, or truss
Adjustability	Tilt ±15°, Swivel ±90°, Roll ±3°
Cable Management	Included
Fan Noise Level	< 30 dB
Included Accessories	Mounting hardware, remote control, safety cable
Maintenance	Clean periodically; check fan for dust buildup
Safety	UL listed; use with safety cable for extra security
Spare Parts Availability	Available from Chief
Warranty	5 years

Frequently Asked Questions - CMSFAN Chief

How do I install the Chief CMSFAN mount?

Installation involves securing the mount plate to the ceiling using the included hardware, attaching the projector to the mount, and connecting the fan power. Refer to the user manual for step-by-step instructions.

What is the weight capacity of the CMSFAN?

The CMSFAN supports projectors up to 50 lbs (22.7 kg). Always verify your projector's weight before mounting.

Can the CMSFAN be used with any projector?

It is compatible with most projectors that have VESA mounting patterns up to 400x400mm. Check your projector's VESA pattern before purchase.

How do I adjust the fan speed?

The fan speed can be adjusted using the included remote control or a button on the mount. There are three speed settings: low, medium, and high.

Is the CMSFAN safe to use?

Yes, it is UL listed and includes a safety cable. Ensure the mount is securely attached to a structural ceiling and the projector is properly locked.

How do I clean the CMSFAN?

Clean the mount and fan with a dry cloth. For the fan, use a soft brush or compressed air to remove dust from the blades. Do not use liquids.

Does the CMSFAN come with a warranty?

Yes, Chief offers a 5-year warranty against defects in materials and workmanship. Contact Chief support for claim procedures.

Can I mount the CMSFAN on a wall?

Yes, the CMSFAN can be mounted on a wall or truss using appropriate adapters (not included). Ensure the wall can support the weight.

How do I route cables through the mount?

The mount features integrated cable management channels. Run the cables through the path provided to keep them organized and hidden.

What spare parts are available for the CMSFAN?

Spare parts such as fan motors, remote controls, and mounting hardware can be ordered directly from Chief. Contact customer service for part numbers.

USER MANUAL CMSFAN Chief

INSTALLATION INSTRUCTIONS

Ceiling AV Enclosure 12V Fan Kit

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone") intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding instructions.

WARNING: Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment, or voiding of factory warranty! It is the installer's responsibility to make sure all components are properly assembled and installed using the instructions provided.

WARNING: Use this fan kit only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.

WARNING: Never operate this fan kit if it is damaged. Return the fan kit to a service center for examination and repair.

WARNING: Do not use this product outdoors.

NOTE: Spacings - To ensure safe operation of the equipment installed in the enclosure, per National Electric Code, ANSI/NFPA 70 Article 725.136(D)(1), a minimum separation of 6mm (0.25 in.) between power cords and signal or communication cables must be maintained.

In the U.S., the equipment shall be installed per the applicable requirements of the National Electrical Code, ANSI/NFPA 70. In Canada, the equipment shall be installed per the applicable requirements of the Canadian Electrical Code, CSA C22.1.

IMPORTANT ! : The CMSFAN is designed to be installed in the Listed Chief CMS491-491C-492-492C above-ceiling suspended storage boxes (not included).

--SAVE THESE INSTRUCTIONS--

DIMENSIONS

AIRFLOW: 100 CFM PER FAN SUPPLY VOLTAGE: 12VDC 18W MAX SOUND OUTPUT: APPROX. 42 dBA PER FAN

DIMENSIONS: INCHES [MILLIMETERS]

TOOLS / PARTS FOR INSTALLATION

NOTE: The CMSFAN (A) is attached within either the CMS491 or CMS492 ceiling boxes in two different manners: - By tapping attachment holes in correct location; or - By removing Phillips screws already located in attachment holes.

INSTALLATION

1. Determine where the CMSFAN (A) will be installed above the ventilation areas in CMS491/CMS492. (See Figure 1)
2. Proceed to appropriate section (Install CMSFAN to Existing Attachment Holes or Install CMSFAN by Creating Attachment Holes) section.

Install CMSFAN to Existing Attachment Holes

1. Remove Phillips head screws from either of two locations where CMSFAN (A) may be attached. (See Figure 1)

Figure 1

1. Attach CMSFAN (A) into the ceiling box using either the screws removed in Step 3, or two 10-24 x 1/2" Phillips pan head screws (B). (See Figure 2)

Figure 2

Install CMSFAN by Creating Attachment Holes

1. Hold CMSFAN (A) in desired location in ceiling box above a ventilation area.
2. Attach fan into place, using two 10-24 x 1/2" Phillips self-drilling screws (C). (See Figure 2)

COMPLETING INSTALLATION

1. Attach power supply (D) to CMSFAN (A). (See Figure 3)

Figure 3

CMSFAN

Installation Instructions