UP27M36SB - Range hood BEST - Free user manual and instructions
Find the device manual for free UP27M36SB BEST in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wall-mounted range hood |
| Brand | BEST |
| Model | UP27M36SB |
| Width | 90 cm |
| Depth | 45 cm |
| Height | 60 - 90 cm |
| Net weight | 15 kg |
| Power supply | 220 - 240 V ~ 50 Hz |
| Motor power | 260 W |
| Maximum airflow | 650 m³/h |
| Noise level | 45 - 65 dB(A) |
| Number of speeds | 3 |
| Lighting | 2 x LED 3 W |
| Control type | Touch control |
| Extraction diameter | 150 mm |
| Operating mode | Extraction or recirculation |
| Grease filters | 2 washable aluminium filters |
| Installation | Wall-mounted or under-cabinet |
| Safety | Automatic shutdown and motor protection |
| Maintenance | Clean filters in dishwasher |
| Spare parts | Filters, bulbs, motor available |
| Warranty | 2 years |
Frequently Asked Questions - UP27M36SB BEST
How to install the UP27M36SB range hood?
Installation must respect safety distances: at least 75 cm between the cooking surface and the hood. First attach the wall bracket, then hang the hood and connect the extraction duct (Ø 150 mm). For recirculation mode, install the charcoal filters (sold separately). Make sure the electrical outlet is accessible.
How to clean the grease filters?
Remove the aluminium filters and wash them by hand or in the dishwasher at a low temperature with a mild detergent. Dry them completely before putting them back. This should be done monthly or after 30 hours of use.
How to switch to recirculation mode?
Recirculation mode is necessary if no external extraction is possible. You need to add a recirculation kit with active charcoal filters. Place the filters behind the air outlet grille, then select recirculation mode on the control panel.
How to replace the LED lighting?
To replace an LED, first turn off the power. Open the cover, unclip the defective LED module and disconnect its connector. Connect the new module and check it works. Use only identical 3 W LEDs.
What is the noise level of the range hood?
The noise level depends on the selected speed: it ranges from 45 dB(A) at minimum speed to 65 dB(A) at maximum speed. For optimal comfort, use the lowest speed for gentle cooking.
How to connect the extraction duct?
The standard extraction duct is 150 mm in diameter. Connect it to the air outlet of the hood using a hose clamp, then route it outside while avoiding tight bends. Make sure the anti-backflow flap works correctly.
What to do if the range hood does not turn on?
First check the power supply and the circuit breaker. Then check the power cable and connections. If the problem persists, parts such as the motor or the electronic board may be faulty; contact after-sales service.
How to set the timer?
On the touch panel, press the Timer button to activate automatic shut-off after 15 minutes. Some versions allow you to adjust the duration by pressing repeatedly. Consult the manual for the key combinations.
What are the exact dimensions of the range hood?
The range hood has a width of 90 cm, a depth of 45 cm and an adjustable height of 60 to 90 cm with the chimney duct. These dimensions allow standard installation under a 90 cm cabinet.
How to get spare parts?
Spare parts such as grease filters, charcoal filters, LEDs and the motor are available from BEST customer service or online. Always provide the model UP27M36SB for compatibility.
User questions about UP27M36SB BEST
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual UP27M36SB - BEST and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UP27M36SB by BEST.
USER MANUAL UP27M36SB BEST
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEST
Model : UP27M36SB
Category : Range hood