AK2500BW - Range hood Zephyr - Free user manual and instructions
Find the device manual for free AK2500BW Zephyr in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wall-mounted extractor hood |
| Brand | Zephyr |
| Model | AK2500BW |
| Dimensions (L x D x H) | 60 x 50 x 45 cm |
| Net weight | 18 kg |
| Power supply | 220-240 V, 50 Hz |
| Suction power | 480 m³/h |
| Noise level | 42 dB (speed 1) to 65 dB (speed 3) |
| Number of speeds | 3 |
| Lighting | 2 LED bulbs of 3 W |
| Controls | Electronic push buttons |
| Exhaust diameter | 150 mm |
| Filter type | Washable aluminum grease filters |
| Operating mode | External extraction or recirculation (with activated carbon filter kit) |
| Maintenance and cleaning | Clean the grease filters once a month in the dishwasher |
| Safety | Programmable automatic shut-off, filter saturation indicator |
| Spare parts and repairability | Filters, LED bulbs, motor replaceable (see manual) |
| General information | Wall installation under a cabinet or as a decorative hood |
Frequently Asked Questions - AK2500BW Zephyr
How to install the AK2500BW hood?
To install your hood, maintain a minimum distance of 65 cm between the electric cooktop and the base of the hood. For a gas cooker, this distance increases to 75 cm. Securely attach the wall support following the template provided.
What regular maintenance is required?
The grease filters must be cleaned monthly. They can be washed by hand or in the dishwasher. The stainless steel exterior is cleaned with a soft cloth dampened with soapy water.
How do I replace the LED bulb?
Cut off the power supply, then unclip the lighting diffuser. The bulb is bayonet type: turn it a quarter turn to remove it. Replace it with a GU10 LED of the same power (3 W).
Can the hood be used in recirculation mode without external extraction?
Yes, the hood can operate in recirculation mode. You must install an activated carbon filtration kit (not supplied) which neutralizes odors before returning the air to the room.
Why is the hood making an abnormal noise?
An abnormal noise may be due to a clogged grease filter, a foreign object in the motor, or an unstable installation. Clean the filters and check the hood's mounting.
How do I set the automatic timer?
To activate the automatic shut-off, press the Timer button; the indicator lights up. Use the + and - buttons to adjust the duration (1 to 15 minutes). The hood will turn off automatically.
When should I clean the grease filters?
The filter saturation indicator blinks after 30 hours of operation. If this indicator lights up, clean the grease filters immediately, otherwise the suction performance decreases.
How do I clean the stainless steel surface?
Use a microfiber cloth and a special stainless steel cleaner. Apply following the direction of the steel's brushing. Never use abrasive powder or steel wool.
What diameter of exhaust duct is required?
The hood is designed for a 150 mm diameter duct. If you use a smaller duct, suction performance will be reduced. Use a rigid duct preferably.
How do I know if the carbon filter needs to be replaced in recirculation mode?
In recirculation mode, the carbon filter must be replaced every 3 to 6 months depending on cooking frequency. It is not washable and must be purchased as a spare part from the manufacturer.
User questions about AK2500BW Zephyr
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual AK2500BW - Zephyr and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AK2500BW by Zephyr.
USER MANUAL AK2500BW Zephyr
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Zephyr
Model : AK2500BW
Category : Range hood