UXT5230BFS - Range hood KITCHENAID - Free user manual and instructions
Find the device manual for free UXT5230BFS KITCHENAID in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | KitchenAid |
| Model | UXT5230BFS |
| Product type | Under-cabinet range hood |
| Color | Brushed stainless steel |
| Material | Stainless steel and glass |
| Width | 75.9 cm |
| Height | 15.2 cm |
| Depth | 46.7 cm |
| Net weight | 21.8 kg |
| Power supply | 120 V, 60 Hz |
| Extraction power | 400 cu ft/min (680 m³/h) |
| Number of speeds | 3 speeds |
| Noise level | From 42 to 65 dB depending on speed |
| Lighting | 2 halogen bulbs of 20 W |
| Filter | Dishwasher-safe aluminum mesh filter |
| Evacuation mode | Exterior venting or recirculation with charcoal filter |
| Duct diameter | 15 cm |
| Controls | Push buttons with speed selection |
| Installation | Under cabinet, wall mounting possible |
| Care and cleaning | Removable and washable filters; stainless steel surface to clean with a soft cloth |
| Safety | Complies with applicable electrical standards |
| Spare parts and repairability | Bulbs, filters, and control panels available |
Frequently Asked Questions - UXT5230BFS KITCHENAID
How to install the KitchenAid UXT5230BFS range hood?
For an under-cabinet installation, the hood attaches to the bottom of the cabinet with the screws provided. The exhaust duct must have a diameter of 15 cm. Maintain a height of approximately 65 to 75 cm above an electric cooktop and 75 to 85 cm above a gas cooktop.
How to clean the grease filters?
Remove the aluminum filters from the hood, then wash them in a dishwasher or in hot water with degreaser. Dry them completely before putting them back. Monthly cleaning is recommended.
How to replace the halogen bulb?
Turn off the hood's power, unclip the lighting cover, then unscrew the defective halogen bulb. Replace it with an identical 20 W bulb. Put the cover back on and restore power.
Can the hood operate in recirculation mode?
Yes, the UXT5230BFS is convertible. In the absence of exterior venting, you can install a recirculation kit with activated charcoal filter. The air is then filtered and released back into the room.
What is the noise level of this hood?
The noise level varies depending on the selected speed: it is between 42 and 65 dB. For quieter operation, use the first speed.
Why does the hood seem to lack power?
First check that the grease filters are clean, because a dirty filter reduces suction. Also make sure the exhaust duct is not blocked and that the backdraft damper opens correctly.
How to convert the hood from exterior venting to recirculation?
Remove the exterior duct, install the adapter and the charcoal filter provided in the recirculation kit, then close the exhaust flap. Follow the manual's instructions to reverse the air flow direction.
What height should there be between the hood and the cooktop?
The recommended distance is 65 to 75 cm for an electric cooktop and 75 to 85 cm for a gas cooktop. This height optimizes smoke capture while ensuring safety.
Should I leave access to the electrical network after installation?
Yes, the hood must be connected to a grounded wall outlet and its cord must remain accessible after installation. The connection must comply with local electrical codes.
Where can I find spare parts for this hood?
You can order bulbs, grease filters, or charcoal filters from KitchenAid customer service or from approved spare parts websites. Always provide the reference UXT5230BFS.
User questions about UXT5230BFS KITCHENAID
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual UXT5230BFS - KITCHENAID and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UXT5230BFS by KITCHENAID.