KUDS01DLSP7 - Dishwasher KITCHENAID - Free user manual and instructions
Find the device manual for free KUDS01DLSP7 KITCHENAID in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Built-in dishwasher |
| Brand | KitchenAid |
| Model | KUDS01DLSP7 |
| Category | Dishwasher |
| Dimensions (W x H x D) | 60 cm x 85 cm x 60 cm (adjustable height) |
| Net weight | 35 kg |
| Capacity | 14 place settings |
| Wash programs | 6 programs: Automatic, Intensive, Normal, Glasses, Quick, Rinse |
| Noise level | 45 dB |
| Water consumption per cycle | 10 L |
| Annual energy consumption | 260 kWh/year |
| Energy efficiency class | A+ |
| Drying type | Condensation drying |
| Wash options | Half-load option, Sanitary option, Steam option |
| Delayed start | Up to 12 hours |
| Cutlery tray | 3 racks on rail |
| Filter | Precision self-cleaning filter |
| Child safety | Control lock |
| Tub material | Stainless steel |
| Power supply | 230 V / 50 Hz |
| Water inlet pressure | 0.1 - 1 MPa (1 - 10 bar) |
| Care and cleaning | Clean the filter regularly, use regenerating salt and rinse aid |
| Spare parts and repairability | Parts available from the manufacturer, standard repairability |
| General information | 48-page user manual available online |
Frequently Asked Questions - KUDS01DLSP7 KITCHENAID
How to install the dishwasher?
Make sure the built-in cavity is at least 60 cm wide. Connect the water inlet to a pressure of 0.1 to 1 MPa and connect the drain hose to the siphon. Adjust the feet so that the appliance is perfectly level.
How to add regenerating salt?
Open the cap of the salt compartment at the bottom of the tub, fill with water first if it's the first time, then pour in special dishwasher salt. Wipe away any residue before closing the cap.
How to fill the rinse aid?
Pour the rinse aid into the designated reservoir, usually next to the detergent dispenser. Adjust the compartment setting to control the amount depending on the water quality.
What is the average cycle duration?
The duration varies depending on the selected program. A normal cycle lasts about 2 hours, the quick program 30 minutes and the intensive program up to 2h30. Temperature and degree of soiling affect the duration.
The dishwasher does not start, what to do?
Check that the door is properly closed and latched, that the power supply is working, and that the child lock is not activated. Refer to the troubleshooting section of the manual for error codes.
How to clean the filters?
Remove the lower basket, unscrew the central filter by turning counterclockwise. Rinse it under running water and remove debris to prevent blockages.
Why is the dishes still dirty after washing?
Check that the spray arms are not clogged and that the water inlet pressure is correct. Use a suitable detergent and do not overload the racks.
How to set the delayed start?
Press the 'Delayed start' button to increase the start time in one-hour increments up to 12 hours. Select the desired program, then press the Start button to arm the delay.
The dishwasher makes noise, is it normal?
A slight noise from the pump and water circulation is normal. If the noise is loud, check that the racks do not block the spray arms. Make sure the dishes are not touching each other to avoid vibrations.
The indicators are flashing, what do they mean?
Flashing indicators generally indicate a fault. Check the error code table in the manual, for example for a water inlet or drainage problem. Turn off the power for 30 seconds to reset.
User questions about KUDS01DLSP7 KITCHENAID
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual KUDS01DLSP7 - KITCHENAID and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KUDS01DLSP7 by KITCHENAID.