DriveCore Install DCi 4|2400N - Receiver CROWN - Free user manual and instructions
Find the device manual for free DriveCore Install DCi 4|2400N CROWN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Crown |
| Model | DriveCore Install DCi 4|2400N |
| Product Type | 4-Channel Power Amplifier |
| Amplifier Technology | DriveCore Class D with high efficiency |
| Number of Channels | 4 |
| Total Output Power | 2400W (configurable by load mode) |
| Output Power per Channel (4Ω) | 600W per channel |
| Output Power per Channel (70V) | 1200W per channel (with step-down) |
| Frequency Response | 20 Hz - 20 kHz, ±0.25 dB |
| Input Connectors | 3-pin XLR and terminal block (Euroblock) |
| Output Connectors | Binding posts and barrier strip |
| Network Interface | HiQnet / Ethernet RJ45 |
| Control and Monitoring | On-board DSP, remote volume control, status LEDs |
| Cooling | Internal temperature-controlled fans |
| Protection Features | Short-circuit, overload, DC fault, thermal and RF protection |
| AC Power Requirements | 100-240 V AC, 50/60 Hz |
| Dimensions (W x H x D) | 19" x 3.5" (2U) x 12.2" (482 x 88 x 310 mm) |
| Weight | 13.6 kg (30 lbs) |
| Form Factor | Rack-mountable, 2U |
| Cleanning and Maintenance | Use dry cloth, avoid dust and moisture; clean filters regularly |
| General Information | Manual available in PDF, 72 pages, English |
Frequently Asked Questions - DriveCore Install DCi 4|2400N CROWN
What is the DriveCore Install DCi 4|2400N?
It is a 4-channel professional power amplifier from Crown, designed for installation applications. It uses DriveCore technology for efficient power delivery and includes networking and DSP capabilities.
What is DriveCore technology?
DriveCore technology integrates the amplifier driver stage and output stage into a single chip, reducing power loss and improving efficiency. This makes the amplifier lighter and more reliable than traditional designs.
How many channels does the DCi 4|2400N have?
It has four independent amplifier channels. They can be used to drive multiple speakers or in bridged modes for higher power.
What is the output power of the DCi 4|2400N?
The total output power is 2400W, with each channel capable of 600W at 4Ω or 1200W at 70V modes, depending on the load configuration.
How do I connect speakers to this amplifier?
Speakers can be connected to the output terminals (binding posts or barrier strip) using appropriate gauge wire. Ensure correct impedance and follow the wiring diagrams in the manual.
Does this amplifier support network control?
Yes, it has a HiQnet network port (Ethernet RJ45) that allows remote control, monitoring and configuration using Crown Audio's software.
Can I use the DCi 4|2400N for 70V distributed audio systems?
Yes, it supports 70V/100V output modes. This is ideal for commercial installations such as paging and background music systems.
What protection features does it have?
It includes protection against short circuits, overloads, DC faults, thermal overheating, and RF interference. The amplifier will automatically shut down or reduce output to prevent damage.
How do I clean and maintain the amplifier?
Use a dry cloth to wipe the exterior. Keep the vents and filters free of dust by vacuuming or cleaning the air filters periodically. Ensure proper airflow around the unit.
Where can I download the user manual?
The user manual is available for free in PDF format on the Notice-Facile.com website. It contains 72 pages and is written in English.
User questions about DriveCore Install DCi 4|2400N CROWN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual DriveCore Install DCi 4|2400N - CROWN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DriveCore Install DCi 4|2400N by CROWN.
USER MANUAL DriveCore Install DCi 4|2400N CROWN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CROWN
Model : DriveCore Install DCi 4|2400N
Category : Receiver