DCi 8|600 - Receiver CROWN - Free user manual and instructions
Find the device manual for free DCi 8|600 CROWN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Networkable Power Amplifier |
| Channels | 8 |
| Power Output (per channel @ 4Ω) | 600 W |
| Power Output (per channel @ 8Ω) | 350 W |
| Frequency Response | 20 Hz – 20 kHz |
| Total Harmonic Distortion (THD) | < 0.5% |
| Signal-to-Noise Ratio | > 100 dB |
| Input Sensitivity | 1.4 Vrms |
| Amplifier Class | Class D |
| DSP | Integrated with presets |
| Network Control | Ethernet (TCP/IP), HiQnet |
| Rack Mountable | Yes, 19" standard, 2U |
| Dimensions (W x H x D) | 19" x 3.5" x 17.5" (483 x 89 x 445 mm) |
| Weight | 28.7 lbs (13 kg) |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption (typical) | 1800 W |
| Cooling | Variable speed fans, rear-to-front airflow |
| Protection | Short circuit, thermal, overload, DC offset |
| Front Panel Indicators | Power, Signal, Clip, Fault |
| Rear Panel Connectors | XLR inputs, Speakon outputs, Ethernet, GPIO |
| Compliance | CE, RoHS |
| Accessories Included | Power cord, rack ears, manual |
Frequently Asked Questions - DCi 8|600 CROWN
What is the power output of the Crown DCi 8|600 per channel?
The Crown DCi 8|600 delivers 600 watts per channel into 4 ohms and 350 watts per channel into 8 ohms, all eight channels driven.
Is the DCi 8|600 a receiver or an amplifier?
It is a professional networkable power amplifier, not a typical AV receiver. It does not include tuner or preamplifier functions.
How do I connect the DCi 8|600 to a network?
Connect an Ethernet cable from the amplifier's Ethernet port to your network switch. Use HiQnet software or the web interface for control and monitoring.
What type of speakers can be used with this amplifier?
Any speakers with a nominal impedance of 4 ohms or 8 ohms and power handling up to 600W (4Ω) can be connected via the Speakon outputs.
Does the DCi 8|600 have built-in DSP?
Yes, it includes an integrated DSP with presets for crossover, EQ, delay, and limiting. These can be configured via the front panel or software.
What do the front panel LEDs indicate?
The front panel has LEDs for Power (green), Signal (green), Clip (red), and Fault (yellow). Clip indicates distortion, Fault indicates protection mode.
Can the amplifier be bridged?
Yes, the DCi 8|600 can be bridged to deliver higher power to fewer channels. Consult the manual for specific bridging configurations.
What is the recommended input sensitivity?
The nominal input sensitivity is 1.4 Vrms for full output. This can be adjusted via the DSP settings.
How do I clean the amplifier?
Disconnect power and use a dry, lint-free cloth to wipe the exterior. Do not use liquids. For fan grilles, use compressed air to remove dust.
What does the 'Fault' LED mean?
The Fault LED indicates the amplifier has entered protection mode due to over-temperature, short circuit, or DC offset. Check speaker connections and ensure adequate ventilation.
User questions about DCi 8|600 CROWN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual DCi 8|600 - CROWN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCi 8|600 by CROWN.
USER MANUAL DCi 8|600 CROWN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CROWN
Model : DCi 8|600
Category : Receiver