SEG-100 - Detector Steren - Free user manual and instructions
Find the device manual for free SEG-100 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Non-contact AC voltage detector |
| Brand | Steren |
| Model | SEG-100 |
| Voltage range | 90 to 1000 V AC |
| Frequency range | 50/60 Hz |
| Detection signal | Red LED and audible buzzer |
| Power supply | 2 x 1.5V AAA batteries |
| Low battery indication | Yes, LED dim or no response |
| Dimensions | Approx. 14 x 3 x 2.3 cm (5.5 x 1.2 x 0.9 in) |
| Weight | Approx. 50 g (1.76 oz) with batteries |
| Material | ABS plastic with insulated housing |
| Safety rating | CAT II 1000V, CAT III 600V |
| Operating temperature | 0°C to 40°C (32°F to 104°F) |
| Storage temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity range | ≤80% RH |
| Applications | Detect live wires, broken cables, fuses, and outlets |
| Maintenance | Clean with a dry cloth; do not use solvents |
| Spare parts | Batteries are replaceable; no other user-serviceable parts |
| Reparability | Not designed for repair; replace if defective |
| Certifications | CE, RoHS |
Frequently Asked Questions - SEG-100 Steren
How does the Steren SEG-100 detect voltage?
The SEG-100 uses non-contact detection to sense the presence of AC voltage through insulation without direct metal contact.
What is the voltage range of the SEG-100?
It detects AC voltages from 90 V to 1000 V at frequencies of 50/60 Hz.
What type of batteries does it require?
It runs on two AAA 1.5V batteries, which are included and easy to replace.
How do I know if the detector is working properly?
Turn it on and test on a known live wire; the red LED and buzzer should activate. Many models also have a self-test button; refer to the manual for specifics.
Can I use this detector on electrical panels?
Yes, it is rated for CAT II 1000V and CAT III 600V, making it suitable for residential and light commercial use.
How do I clean the detector?
Wipe the housing with a dry, clean cloth. Do not use solvents or immerse in water.
What does the LED indicator represent?
A red LED lights up when AC voltage is detected. If the LED is weak or off near known live wires, replace the batteries.
Is it safe to use near live circuits?
Yes, the insulated housing and non-contact design provide safety, but always follow standard electrical safety practices.
Can it detect voltage through insulation?
Yes, it senses the electrostatic field around a live conductor, allowing detection through wire insulation and thin barriers.
What are the storage recommendations?
Store it in a cool, dry place, and remove batteries if not used for extended periods to avoid corrosion.
User questions about SEG-100 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Detector in PDF format for free! Find your manual SEG-100 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SEG-100 by Steren.
USER MANUAL SEG-100 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : SEG-100
Category : Detector